วีดีโอ

LOL thanks it's a process I learned from others back in the day!

@@Quaxxkss yes! Watch this video for more info th-cam.com/video/W8tEk7Y1qZ4/w-d-xo.htmlsi=xGuZjfCkQIRCOi2c

@@shrinkrc thank u

Around 290mm.

@@shrinkrc okay thank you. 😀

Thank you!!!

I've got gen8 mounts for XtraCab and Mojave 4 Door and Scottsdale!

@@shrinkrc ok thank you

@@pacifichooks7622 hi no I don’t offer that combo

Thanks for watching!🤗

Thank you🤗

@@rccrawlingaddict207 🤗thank you for watching!

@@antoineozaneaux6881 thank you!

@@MrFroggy29 merci!

The key to TRX4 is to remove the stock battery tray, and remove the upper support between the rear shock towers. Check out my TRX4 videos for Mojave 4 door and Chevy truck. Also check out my Xtracab videos for VS410. Then set the body on there with the interior and see where it hits. Write to me at jesse@shrinkrc.com if you still have questions.

Its a Bressanon 4V, they have them on Amazon sometimes but not always. (I don't see it on there right now).

I usually use the narrowest hubs that I can fit.

All of our mounts for Enduro will fit the Zuul and Ecto frame. But the Zuul and Ecto have very long wheelbases and will need to be converted to a 4 link in the rear, if you want the bed to line up correctly. I have details about this on the website. ShrinkRC.com

F8 green

Stock links, you just need longer rod ends on one end, all four links. Use these, and you might need to trim them a little: www.avantlink.com/click.php?tool_type=cl&merchant_id=4b85b2b7-558e-4304-89fc-54958c8f47f0&website_id=e47f8f9d-e7c7-4905-bf2e-7001163325f5&url=https%3A%2F%2Fwww.amainhobbies.com%2Ftraxxas-rod-ends-w-hollow-balls-12-tra5525%2Fp19147

Yes, you'll need to drill a new hole in the frame to move the rear towers forward. I think I put the back hole of the shock tower on the last hole, then added a new hole for the front hole of the shock tower.

And then I think I flipped the towers left to right, but I don't remember for sure, its got my K10 conversion body on it now.

Yeah its been around a while!

That’s correct you won’t need to make clearance for the extra servos.

Thank you!

The element Enduro is the most versatile chassis of all of them. It can be configured by just changing the rear links to a 11.8 or 12.0 or 12.3 or 12.8 inch wheelbase. It can also be made an 11.4 inch wheelbase by using Traxxas short rod ends with the 11.8 rear links. I have more body options for element than any other platform.

The element Enduro is the most versatile chassis of all of them. It can be configured by just changing the rear links to a 11.8 or 12.0 or 12.3 or 12.8 inch wheelbase. It can also be made an 11.4 inch wheelbase by using Traxxas short rod ends with the 11.8 rear links. I have more body options for element than any other platform.

That's a good point, I will try to remember. You can always ask me. When it comes to RC4WD bodies, 4.75" will never fit without major hacking. 4.19" will fit Mojave bodies with some rubbing, but they will require trimming with Xtrcab, 4runner, and Chevys. 3.9" tires or smaller will usually fit with no trimming.

Some projects take time! You'll get there!

🤣🤣🤣

Hi I only ship to UK via eBay. They cover all of the customs charges etc.

@@shrinkrc that's perfect 😁 what's your ebay page? Do you have a link please?

@@shrinkrc found you haha, do I need to do anything else to make the blazer body fit? Because my scx10ii is 313mm wheelbase I think

@@YUNGHENNEY Hi you will need shorter rear links, Use rod ends (AX31186), upper links (AX31421), lower links (AX31419), and set screws (AX31343) to get a 11.4" wheelbase. Or you can make custom rear links, I have a video here: th-cam.com/video/Xarp2kymeVQ/w-d-xo.htmlsi=NiY200-mryIsOWMB

@@YUNGHENNEY Also my raised center console was made for this combination: www.ebay.com/itm/403817446495

Thank you very much! It's true nothing can make up for the performance of a 4.75 but it can be fun to challenge yourself with tiny tires. Be sure to check out my video on my SCX Pro Mojave 4 door, its running 4.75's

@shrinkrc I'm definitely watching that, Thank you. Do you sell the Mohave body or just the parts to make it work ? would you recommend Amain Hobbys or someone ? Again, thank you, and your builds are absolutely amazing 👏🏻 💯

@@ConditionZero76 I only sell body mounts and accessories, no bodies. Unfortunately it seems RC4WD has discontinued the 4 door mojave body which is a serious bummer. Another option is to build a truggy style Mojave 2 door. Amain Hobbies is top notch and I absolutely recommend them for anything RC.

@@shrinkrc awesome thanks so much!!

🤣Thank you! I can't take the credit for this one, I learned it from someone else a long time ago!

LOL thank you.

Thank you bud!!

🤣Well ok, as long as you use ShrinkRC mounts! I will need to look up the killer body battery tray, I haven't see it.👋

🤣 Keep in mind the caster on the front portals pushes the front wheels forward about 5mm. Also portals raise the center of gravity because the axles are 10mm higher off the ground. I'm a fan of straigt axles personally but that comes down to personal preference. Some say straight axles look more scale, but of course there are 1:1 rigs on portals.

@shrinkrc I went with the 410 phoenix rtr . My local shop had one. Going to pick up the mounts today also

Thank you brother!!

I don't remember if the Ascent came with additional posts in the box for the front, but yes posts are usally all you need for lexan bodies.

Thank you! I usually do put a lot time in each, but it varies 🤣

I checked out his video, he did a nice job on that, especially with the bed support.

@shrinkrc will you be making rear mounts for the rear of the fusion?

@@jasonkarlin2751 The regular ones might work, I'm mot 100% sure though. I'm still waiting for feedback on the rears.

@shrinkrc the rear chassis is slightly shorter, the holes do not line up with your rear, and the rear of the chassis does not dip downward like the original. It continues straight.

@@jasonkarlin2751 The length doesnt matter on the Xtracab, there's no holes in the xtracab bed to line up to. I know the "dip" you are referring to, but I'm wondering if the Fusion rails just don't have as much rise at the shock tower area, and therefore land in the same spot? I'd be surprised if the holes don't line up, since the fusion bumpers are advertised as fitting the standard Ascent. I'll probably wind up buying some Fusion rails so I can settle the matter.