Call them whatever u want. And if people don't know what u mean that's their problem. I enjoy ur content and look forward to ur builds and videos. So keep doing ur thing
Your videos have gotten me sticky into hardbodies…the body mounts for the VS410 for perfectly…your recommendation for JB plastic weld was also spot on…7-8” figures work the best. thanks for all you do Jesse!
I don't blame you! haha! A lot of times I keep my truck bodies close to stock just so I can show people that the wheels line up right inside the fenders, and show that you don't have to cut them if you don't want to. This one would definitely look great with some bigger tires on it and would perform better too.
It would be cool to make the bed cover so that it's hinged and actually flips open at each joint. And u could make 2 small latch points to be screwed on each side of the bed on the inside so that the cover clips down. If I had a printer I could show u better then trying to explain it. Because I'm sure I sound like a crazy person.😂
On shallow beds I use truck bed coating, it helps visually create a little depth. Could try that before trying a tonneau cover. It's nice to spray under the body, too.
@@shrinkrc and if you forget about the parts they won't be damaged. The door handles and headlight backer for my 10.ii hilux build sat for close to a month!
Hey great looking truck, I’m building a similar truck with that body as a mud truck, might need to do my grill and bumpers in black 👍. Where did you get the ford emblem? Keychain again?? Mine is actually the HG knock off version I never got a ford emblem 😢
the ford emblem is a regular old sticker that a buddy of mine sent me a while back and happened to be just right size. I've been meaning to order a metal one I saw on ebay though, you can find it by searching "scale ford emblem" and they are 10 bucks shipped.
New to yiur channel. Just subscribed. Love your builds and your parts. Im finishing up a Tamiya Toyota Hilux. I love yiurs. That independent front end is sick. How does it crawl?
I'm embarassed to say I haven't crawled enough with it to give a fair review of its crawling. I have ripped around in the back yard with it, and its more stable than a locked crawler should be. It's got a holmes outrunner and a castle speed controller, good low end and high end and a nice whine🤣
@@shrinkrc looks tight. I'd like to see you do a short vid running it around. I'm sure it's a lot more stable. More of a pre runner now. Probably jumps well.
Call them whatever u want. And if people don't know what u mean that's their problem. I enjoy ur content and look forward to ur builds and videos. So keep doing ur thing
Call them whatever u want. And if people don't know what u mean that's their problem. I enjoy ur content and look forward to ur builds and videos. So keep doing ur thing
🤗thank you!
Man these are all such awesome builds! Thanks for all the tips you share too 👍
Your videos have gotten me sticky into hardbodies…the body mounts for the VS410 for perfectly…your recommendation for JB plastic weld was also spot on…7-8” figures work the best. thanks for all you do Jesse!
Thank you very much! Happy building!
Had to comment, dude got straight into the good shit no dumb intro
LOL thank you.
All those rock crawlers you have there are totally awesome! I love everything about them an the garage lift an stairs, amazing!❤
thank you very much!
Nice trucks you can tell you put a lot of time in each one
Thank you! I usually do put a lot time in each, but it varies 🤣
Been waiting for another video from you! Awesome job and nice truck man!
🤗thank you!!
Well said my friend
thank you I appreciate it!
Looks good my friend.... 🔥 🔥
thanks bud!
I like the f350 and I would want to cut the fenders a little and make it into a crazier rock crawler
I don't blame you! haha! A lot of times I keep my truck bodies close to stock just so I can show people that the wheels line up right inside the fenders, and show that you don't have to cut them if you don't want to. This one would definitely look great with some bigger tires on it and would perform better too.
@@shrinkrc definitely 😀
It would be cool to make the bed cover so that it's hinged and actually flips open at each joint. And u could make 2 small latch points to be screwed on each side of the bed on the inside so that the cover clips down. If I had a printer I could show u better then trying to explain it. Because I'm sure I sound like a crazy person.😂
that sounds pretty cool to me!
👍
On shallow beds I use truck bed coating, it helps visually create a little depth. Could try that before trying a tonneau cover. It's nice to spray under the body, too.
I agree that could be a good look!
Who cares about these keyboard cry babies 🤣 just do you Jesse! Great products!! Thank you!!
🤗thank you bud I appreciate you!
I've had really good luck using super clean to remove chrome from plastic parts
I have not tried that. Do you need to soak it over night like eazy off or does it just come right off?
@@shrinkrcsoak for about 30 minutes or so and the chrome will gone.
@@MeatSleeve yup 30-35 minutes and you have clean white abs
@@shrinkrc and if you forget about the parts they won't be damaged. The door handles and headlight backer for my 10.ii hilux build sat for close to a month!
@@MeatSleeveoh that’s fast!
Hey great looking truck, I’m building a similar truck with that body as a mud truck, might need to do my grill and bumpers in black 👍. Where did you get the ford emblem? Keychain again?? Mine is actually the HG knock off version I never got a ford emblem 😢
the ford emblem is a regular old sticker that a buddy of mine sent me a while back and happened to be just right size. I've been meaning to order a metal one I saw on ebay though, you can find it by searching "scale ford emblem" and they are 10 bucks shipped.
New to yiur channel. Just subscribed. Love your builds and your parts. Im finishing up a Tamiya Toyota Hilux. I love yiurs. That independent front end is sick. How does it crawl?
I'm embarassed to say I haven't crawled enough with it to give a fair review of its crawling. I have ripped around in the back yard with it, and its more stable than a locked crawler should be. It's got a holmes outrunner and a castle speed controller, good low end and high end and a nice whine🤣
@@shrinkrc looks tight. I'd like to see you do a short vid running it around. I'm sure it's a lot more stable. More of a pre runner now. Probably jumps well.
Call them whatever u want. And if people don't know what u mean that's their problem. I enjoy ur content and look forward to ur builds and videos. So keep doing ur thing