วีดีโอ

I just had this to play with for a short time. It was fun but it's not what I would consider as a "1st choice" either

I'm using 1/2" in this video but 3/4 or 1 " would be good if you use a wing nut so you can rotate them under the stove for transport. The wing nuts should let you loosen and tighten much more easily. The bigger the conduit clamps the wider the stance so the higher the stability

i thought I had replied to your comment already but I'm not seeing it so I must have forgotten to tap the post button. a pot stand also allows for different sized pots so they never hurt to use

😂

😂 that's great

Thank you

good suggestions

What's that old saying? Great minds... Lol. Thanks for watching

sounds good

the trick is a steady movement. if you get to excited while you're doing it you can mess up the internal gears. they are pretty cheap so go ahead and get a couple just in case

@@survivorjohnny44 nice tip! Thanks

Thanks and you are correct about this being a good match for an alcohol stove. You just need some metal cross bars (coat hanger will work) to lift the stove so that you have just more than an inch or 3cm from the top of the stove to the bottom of the pot on top of the IKEA. I recommend at least 2 crossbars and experiment with the height and stability before you add the alcohol to the stove I should also say that depending on what type of stove you use that 1 inch or 3cm gap will very. If you roll towards the bottom of my videos I show some how to vids for several types of stoves

Great score!!

I'm sorry but the one I made for Nathan was pretty much a one off. I found all of the things to make it at thrift stores and yard sales I think. It been many years since I made it so I need to find the video of making it on my channel to even see what I made it out of. I'll look for my original video and see if it's even possible to copy

Thanks for the smile

Glad to be of service 😊

good ideas here

it's a really good one for sure

I have collected 1000s of feet and I use it for all kinds of stuff. Hammock straps, ridge lines, dog leashes I even pulled an SUV out of a ditch by wrapping a 6 or 7 strand loop from his hitch to my toe hook. I love this stuff

Your crack me up brother. They have been making these since before the 1920s but it is really good to hear from you. I hope everything is going good for you and your family

Lol, thanks brother

I didn't know about the over under version and that Enfield sounds pretty cool

I'm not sure how to respond to this

Thanks

they are just for fun. I use a coffee can hobo stove like the ones I show on my other videos

❤❤❤❤

The funny thing is that there are people that would have paid you for it or felt like they got a "big score" finding it at a yard sale

Cool, hello from the U.S

if I remember right, moments after that vid was shot they put some mound killer on it. those fire ants were at the entrance to an open retail store and needed to be gone

It's hard to get a good focal point on light colored and clear things. It works best on dark surfaces. You can find these to buy online if you search "fresnel lens"

is that the part where I wanted to reassure everyone that there no discs harmed in the making of the video but had to admit that the stainless steel wrecked almost a whole package of them? I enjoyed that

@@survivorjohnny44 That is exactly the info I was looking for actually 😂 so now I know this is not a good idea and I have to look for another option. Thanks! 😁👍

I used a Dremel tool with cutting disks. I'll find a Walmart or Amazon/ebay link for you to see one

www.walmart.com/ip/Dremel-100-N-6-120-Volt-Single-Speed-Rotary-Tool-Kit-with-6-Accessories/15173789?athbdg=L1600

Here is a guy using a Dremel to do it. It's not too bad and goes pretty quickly th-cam.com/video/L7y7EHRYNJs/w-d-xo.html

I think it's a stainless steel children's kitchen set from Walmart or Ikea. (if I remember correctly)

Thanks for watching it. I use this stuff for my hammock straps and ridge lines now. There is something my buddy found found called AMSTEEL or something that's even better. It's Paracord sized but as strong as mule tape. I'm not sure on the name but it's something like that

I used 2 pair of pliers to bend the "tab" and that's the only modification to the ring. From there you just tie on the line. You may have to watch it a couple of times to see it. Sorry I wasn't more clear in the video explaining it

Thanks

www.ebay.com/itm/144216559503 I'm sorry it took so long to reply. I'm also sorry that I don't have any stove kits to sell but if I make any to sell I will let you know by posting another reply for you here. I was however able to get a link for the exact phariseeum rod in the video. mine is years old now if you look at the date I posted the video. it is still going strong with plenty of life in it and I cannot give a stronger recommendation for a product that I have used.

That's kind of you to say, thank you. Stoves are fun to make and tweak

great, glad I could help and thanks for letting me know

@@survivorjohnny44 sure m8👍👍😁

It came from the factory like that. The only modification I made was adding the wooden handle to replace the small plastic one it came with. That haven't made these deringers in many many years

It was left over flashing bu5 it was thick for flashing. Nowhere near 1/8" tho

I'm glad you liked it. Thanks for watching

It's going ok, I hope it's all good for you and yours

This mound was at the main entrance to a retail store and of I'm not mistaken after this video we had to sprinkle the mound with that stuff. Can't have fire ants biting customers

I'm still using them and it's been years now. I roll my tarp around my sleep system, strap it down and I'm good to go. thanks for watching

What a fantastic idea! Dog Collars are $7 each today and made in China.

@@Wopayne I just saw this comment, sorry. I bet they are even higher now that everything is through the roof

It holsters nicely in a com pouch and I still love it. They are as rare as hens teeth to find since I believe they haven't been in production for many years

@@survivorjohnny44 Good stuff man !! I think Excalibur catalog still has them but don’t quote me on that . A follow up vid with both rounds would be nice 👍

@@meca13b after each shot you have to hand rotate the cylinder to next chamber. It indexes nicely though. You can fire off all 5 barrels pretty quickly but it is a no frills kinda thing

Thanks. My brother made several and had them under his kitchen sink. When the power was out in a snow storm a few years ago they were still able to cook. They are really easy. Thanks again

Randomly unexpected answer of the year award. Thanks for the laugh

@@survivorjohnny44 muletape rocks. I’ve been using it since 2002. Thanks for the video

Thank you, if you try it bent onwards and it works you will have improved on my idea. I like that