วีดีโอ

Plus, this one is so quiet and out of my next 3,000 rounds loaded, only 2 were upside down.

Thanks for watching and your comment! Yes, everyone has their own preference. Just a note that the single bolt that holds down the Matchsaverz with the velcro is so solid, that I've never had a problem with it moving. Also, if you do need to reposition it in the future, you can just loosen the bolt and rotate it up or down then reattach it to the velcro. You can't do that with the Magload. But again, the only real difference is personal preference.

@@mannyclaudiacortez7708 Thanks for watching and your question! Yes-the upper is all metal. Super sturdy and it helps with accuracy.

Thanks for watching! I have the Atlas Nemesis in 40 cal to shoot Major Power Factor in USPSA Limited Division, the Hyperion in 9mm with iron sights, the Titan in 40 cal (as a backup to my Nemesis), and of course the Artemis as per this video. I've shot just about every competition handgun and for sure my Atlas guns are better than Staccato, CZ, and especially all the over-the-counter production guns (Sig, Smith & Wesson, Glock, etc.). Why I purchased my first Atlas gun (the Nemesis) was because I called Adam, who is basically the guy that makes everything run there, and he spent 3 hours on the phone with me on a Sunday to tell me about what I needed to have in my competition gun. He would always say "No matter which gun you end-up going with..." so he wasn't pushing their brand. Also, for $250.00 you can ship them your Atlas gun, and they'll do a full disassembly and deep clean and replace any worn parts (any broken stuff like a slide or frame is on you) and then send it back to you FedEx overnight. So that's a pretty good deal. Besides all that, it's the flattest shooting most consistent, comfortable, and accurate handgun in the world--it's a hand-crafted work of art. I know they're expensive, but they have a 6 month wait time, so you can pay it off over those months. It's like putting a gun on layaway. The Honest Outlaw on TH-cam agrees with me that they make the best guns in the world.

Thanks for watching! Yes, it does use a flathead because you can use the rim of a 5.56 or 7.62 case to tighten it or loosen it. That's the way the slot is designed.

Thanks for watching! Yes, my Hellion purchase was one of the best I've ever made. Ridiculously accurate out to 600 yards!

WOW! I'm sorry to hear that. That's weird. Mine came with the spring and you do not have to swap it for large primers.

Thanks for watching and your question! Those plates are the ones that came with my Canik. So inside the gun box that you get with the gun, is the entire kit with all the plates you need for any optic on the market!

@@docgsreloading7985 welcome. I just got the TTI Combat and can’t fit my Burris Fastfire 3 on it. I’ve seen that people file some of theirs down. I guess that’s something I’ll have to do. Unless you know of a specific one that does my red dot.

@@lionelcortez3115 Thanks for watching! Unfortunately, I have no experience, nor have I seen anyone with the TTI version of the Canik yet at a competition! So I can't help. Maybe someone can offer some comments.

Thanks for watching!! Those are Red Hill Tactical. The best holsters I've ever owned. Very stiff, fits the guns like a glove, and never scratches the gun or causes any problems with the finish. Fully adjustable tension.

Thanks for watching and your question! This holster will NOT work with any type of barrel extension. I double checked and there is no room at all at the muzzle. I don't know if they have a holster for the exact same gun but with a threaded barrel/comp. For sure, this model won't work for that.

@@docgsreloading7985 thank you for your quick reply and thank so much for checking on this! I really appreciate it!

Thanks for watching! I have seen those, and they do look cool. It’s just that the SN is on the upper, so I don’t know how that must get transferred over the the new upper so you don’t get into trouble with BATFE. Also, I hate to be all nostalgic, but I really like how the PS90 looks stock-and by stock, I also mean the short barrel.

@@docgsreloading7985 ---The XF-50 uppers have to deliver to an FFL, so they must have their own SN on them. BTW, they have accessory shrouds to cover 16" barrels. I wonder why they don't have a provision to install a light and a LASER next to the barrel---It would not be a major design change.

@@elultimo102 Oh, that makes sense. Then the FFL must do the SN transfer from yours to the new one so they don't think it's a second gun. What I use is the Surefire X400 weapon light and laser combo. I just snaps on to the picatinny rail that I installed on the right and left side of the receiver. I can easily activate it with my left thumb. I'd look into that if you want. The nice thing is that I can snap it on and off without tools.

WOW!! You're a comedian--and quite funny!!🤣😂🤣😂

@@docgsreloading7985 I try!

Thanks for watching! That is the Red Hill Tactical holster. Those are the only brand of holster I use for any competition. They’re absolutely fantastic! Check out this video I posted about them: th-cam.com/video/r-K7pzoj0qk/w-d-xo.htmlsi=AR72DIiHco-thl8w

Thanks for watching! WOW! I'm sorry to hear that. On their website, it shows there a dealer in Glendale, AZ. I don't know if that's within driving distance for you. I got my stuff from a store in FL when they shipped it to me. Some items do come from Slovenia, and even then I got it within 3 days and it was cheap.

That's exactly what I would recommend! Those rings are so easy to install it's ridiculous. Plus, I have them on my Barrett 82A-1 in 50 BMG holding a dedicated Nightforce scope and have never had an issue with them loosening.

@@docgsreloading7985 do you know the difference between m10 rings and m-brace rings they have?

@@docgsreloading7985 I called and asked . It’s the same thing just new version and they are heavier according to ARC.

Thanks for watching and your question! Those are Barrett scope rings and available through their online store. I’ve just about changed all my scope rings over to the American Rifle Company brand. Those are much nicer and easier to mount with absolutely no problem with the scope twisting when tightening the ring. The Barrett ones in this video are the usual design and more difficult to mount the scope in. Please see my video on the Schmidt-Bender scope review I did where I comment on the American Rifle Company’s rings. Thanks again and I hope this helps!

That bubble level you have on your scope . It’s that called the Flatline Ops ACCU/LEVEL Articulating Scope Level Matte? I might get that next for my Barrett.

@@clos4209 Thanks for watching! Yes, that is the one I have on that scope. I like that you can do a fine adjustment from the closed or open position to get the level perfect. Plus, it’s nice that you can use it it in either the open or closed position since it’s easily visible. I have that product on pretty much every scope I own.

Thanks for watching! The Surefire light comes with an M-Lok and Picatinny mount option. I used the M-Lok option and mounted it to the slot located on the front left side of the shotgun.

@@docgsreloading7985 thanks so much

Thanks for watching! Check out the link in the video description. I got the Limbsaver through Amazon, since they had it in stock and got it to me the quickest.

Thanks for watching and your suggestion! I checked out that HB Industries website and it has some really cool stuff! For suppressors, I had tried my AB Little Bird and their A10 (in 5.56) as well as my SilencerCo Switchback (has 4 configurations/lengths). I ended up just dedicating my SilencerCo Switchback and leaving it in my PS90 case. The A10 was overkill, the Little Bird was too long, and the Switchback in the medium length worked perfectly! I'm on my 14th suppressor already, and will probably order more in the future for sure!

Thanks for watching and your question! Here's the link: www.midwestgunworks.com/page/mgwi/prod/si-bm4-hayl-rail It didn't come in FDE when I ordered mine--maybe I would have purchased that color.

@@docgsreloading7985thank you

Thanks for watching and that's great to hear!

You won't be disappointed! I love my Artemis. People have even said to me how flat they notice it shooting at events. Here's where to get your red dot cover: dreamplastics.com/ They have the greatest products for pretty much every sight--I even got them for m EoTech's that I have on my AR's. If your Atlas gun has the co-witness sights, then you'll have to cut a small notch in the back of the cover to get it to fit. Not a big deal. Oh yeah, they also quoted me 6 months and I got it in 5, so that's maybe what will happen with yours.

@@docgsreloading7985 Thanks, I also ordered the hard case like you did. Is it a Pelican or is there a brand name on it ?

@@joebishop7909 Yes, it's an SKB case (and it takes a lot for me to say this, since I have well over 20 Pelican cases--and other brands) that the SKB is MUCH better than the Pelican. The one from Atlas has very stiff and protective, custom cut, foam and great latches that must be unlocked from a bottom spring loaded lever (Pelican cases don't have that unless it's a much more expensive case). Plus, the Atlas SKB case has the 2 levels, so now I can take my gun safely to an event and I can have all the tools and all my mags in the same case and I don't have to remember a separate mag pouch. I bought 3 other SKB Atlas cases for my other 3 Atlas guns--it's just the best way to safely carry the gun. I'd even let TSA put it on a plane since I know it would be safe from any baggage handler!

WOW! Is that stupid. Again, those knee-jerk 'feel-good' laws they pass have no impact on anything, except law-abiding citizens getting firearms. In my state, they just went backwards 25 years, now if you don't have a CPL, you have to go get a background check at the local Sheriff's department to purchase a handgun, not a long-gun, just a handgun. So you have to have a double background check to purchase a handgun now--wow great idea. These idiot legislators make such stupid decisions. So if you're angry at someone, and you wait 7 days, you'll change your mind and 'cool-off'--right? Stupid.

@@docgsreloading7985 I agree 100% they need to stop infringing on responsible gun owners rights and start making laws stronger and more severe on the people who break the law with firearms. Automatic 50 years in prison with a firearm related crime. That's what would make people think twice

Thanks for watching! Yeah, it's not cheap, but that light will last me the rest of my life even if I run it over with my truck. My theory that my mom taught me is, you get what you pay for!

Thanks for watching and your question! Having shot both the stock and the limbsaver butt pad, I'd have to say that yes, regardless of technique, the limbsaver makes a significant improvement and is worth the investment.