Awesome setup Andrew. He did a good job of running thru the setup in stages and explaining the blower installation. Good job on the exhaust and engine build guys it sounds badass.
Lol you are not tripping. It’s funny. He loosened his bed bolts so he could move some stuff. Forgot. Then did that. Thankfully the filler neck and roll pan was still bolted on haha We were cracking up
@@NorthernPerformanceCars man I saw the back of that bed lift up I was think is that a tilt bed? No I have seen that truck before that shouldn't be doing that.. I bet it was hilarious
Awesome truck! I have a 383 LC9 sitting at about 12-1 making just shy of 600 N/A, planned on spraying it but what are your thoughts on that kind of compression and a Torque storm on top ? Is it doable ?
I have a 5.3 with a torqstorm supercharger and some prc 220 cnc ported heads. What would be the biggest cam I could run with that? I really like a lot of chop. Thanks
Just wanna ask, would it be possible to run this on a 4.8 with a small cam, a 340 drop in pump, and a set of upgraded injectors? And also what about non intercooled?? Just a daily driver
I been doing my homework on the torqstorm and I must say no bad reviews and for the price they have really change the game compared to the prices of the other superchargers that’s out there
It’s actually the large speed engineering mufflers. It is tame but sounds great.virtually no drone. I made a custom pipe route so it’s not a y pipe any longer. X piped dual 3”
@@JorgeRamirez-l5m oem computers do some neat stuff. I’m a simple guy though. I like the path of Least resistance. Not that it’s hard. Just a creature of habit I suppose.
@@NorthernPerformanceCars hey there northern performamce you thinking of buying a built stage 2 4L80 that includes: Complete over haul kit Trans go shift kit Bushings Valve body Cluthces think it's ideal to have a torq storm set up like when Andy was in the 600 hp range?
I have a 1975 caprice convertible with a LS swap Mild cam 3500 stall rear end done with a trail blazer ss intake what size torqstorm should I run and how much HP u think I would make with my setup
That is a beautiful sounding exhaust! And this truck should probably perform pretty similarly to your new LS7 in the red truck, true Kenny? Assuming yes, this is a really nice (assuming quite a bit less expensive) way to get to a really great end product.
Yessir. This thing is a torque monster due to the whole combo. It’s a 383ci stroked ls1 basically that we installed mid last year. It’ll be a really close race between us I’m assuming. We will give it a go when summer comes! I think overall it’s similarly priced being it had a completely built engine etc. but certainly easier for the normal guy to achieve. My cylinder heads cost as much as his plus the blower lol Bottom end wise was similar cost. So definitely splitting hairs.
I've got a 2000 2 door I'm thinking of swapping over on an Escalade frame to get rid of the rear leaf's. Plus it's got a way better braking system than 6 cylinder truck does
Old man here. Just stumbled onto this video. Latino, tired and grumpy. GREAT license plate! Made my day. Thank you.
Awesome setup Andrew. He did a good job of running thru the setup in stages and explaining the blower installation.
Good job on the exhaust and engine build guys it sounds badass.
Am I tripping or did the bed almost come off during the doughnuts
Lol you are not tripping. It’s funny. He loosened his bed bolts so he could move some stuff.
Forgot. Then did that. Thankfully the filler neck and roll pan was still bolted on haha
We were cracking up
@@NorthernPerformanceCars man I saw the back of that bed lift up I was think is that a tilt bed? No I have seen that truck before that shouldn't be doing that.. I bet it was hilarious
@@dannykirby7023 lol yea. We were standing there like oh shit. Glad one of us caught it on video.
Damn i thought for sure the frame snapped 😅
Ontario rust lol
I love it! Outstanding work guys
It’s a fun project for sure!
That truck sounds great! You guys should do a video on pros and cons of a torque storm versus a procharger.
That’s a good idea! We could do that.
@@NorthernPerformanceCars That would be great. My long term goal is a procharger for my truck but torque storm might be a viable option as well.
Didn't torquestorm introduce an 88mm supercharger? That should be on up there now....
@@ShawnGilbert1967 i think it was a 91mm and 94mm i saw it the other day
Nice work! That will be a fun truck on the street.
Yessir! A total blast!
I had no clue about these. That’s an awesome bolt on.
mike myke has an ebay turbo on a stock block 5.3 making close to 800hp
I was gonna say, did yall fold the frame but reading the comments the bolts were loose
Congrats Andrew she's Badass
Awesome truck! I have a 383 LC9 sitting at about 12-1 making just shy of 600 N/A, planned on spraying it but what are your thoughts on that kind of compression and a Torque storm on top ? Is it doable ?
I have a 5.3 with a torqstorm supercharger and some prc 220 cnc ported heads. What would be the biggest cam I could run with that? I really like a lot of chop. Thanks
Badass maybe later on I love that exhaust Andrew sounds good
jamies caprices needs this....
How much boost ?
Just wanna ask, would it be possible to run this on a 4.8 with a small cam, a 340 drop in pump, and a set of upgraded injectors? And also what about non intercooled?? Just a daily driver
Was the blow off valve named? Like the way it sounds I’d like to look in to them for my build
I been doing my homework on the torqstorm and I must say no bad reviews and for the price they have really change the game compared to the prices of the other superchargers that’s out there
They have awesome blowers. 75mm or the 84mm, both badass
Bad ass truck, so is it on stock 1 bar map sensor and running maf sensor too?
Correct.
What’s the labor charge for this install?
What did you do for the intercooler piping
Which speed engineering mufflers
Nice seeing Chevy and not all those coyote trucks
Where are you located ?
Nice vid And truck. 💪 What i need for 2003 silverado to reliable 600-700whp truck? Example If i have torqstorm
Truck sounds good, i just put a Torqstorm on my 5.3 3rd gen camaro
Heck yea! That’ll be fun!
friggin love it !!!
I wish i was closer to you guys.
What camshaft? Thanks for the info on all the torqstorm builds!!! About to pull the trigger on one
Yessir! Not a problem. It has a tick stage 1 stroker
What exhaust is on this thing sounds supper clean
It’s actually the large speed engineering mufflers.
It is tame but sounds great.virtually no drone.
I made a custom pipe route so it’s not a y pipe any longer. X piped dual 3”
plan on putting my V on that Dyno this summer
Thing sounds sick
I wonder what my 6.2l bore ly6 will make with the 3.1 pulley torqstorm.
Tbss, ported ls3 tb, 229/244 625/615 113 cam, 1 7/8 equal length exhaust
Its gonna make sex
On tuning those p59 computers have u used the costome operating system with the dual ve table??
I have not.
Haven’t had a reason to. None of these combos are too overkill that we do.
@NorthernPerformanceCars oh I see..... a lot of tuners haven't even heard of that dual ve table COS
@@JorgeRamirez-l5m oem computers do some neat stuff. I’m a simple guy though. I like the path of Least resistance.
Not that it’s hard. Just a creature of habit I suppose.
roughly how much karats for the exact same set up as Andrew’s cat eye shit is fckn sick!🔥
@@nbspepe01 we have a bigger supercharger on it now. Makes 750rwhp. Thing is a beast!
@
The first set up w the Torq Storm is more than enough for me😁👍 , wonder how much it cost to get it all built
@@NorthernPerformanceCars
hey there northern performamce
you thinking of buying a built stage 2 4L80 that includes:
Complete over haul kit
Trans go shift kit
Bushings
Valve body
Cluthces
think it's ideal to have a torq storm set up like when Andy was in the 600 hp range?
Thing sounds insane
is reverse rotation?
What size bov is on there?
I have a 1975 caprice convertible with a LS swap Mild cam 3500 stall rear end done with a trail blazer ss intake what size torqstorm should I run and how much HP u think I would make with my setup
Fuel upgrades? I'm putting a torqstorm kit together for my silverado as well.
Twin intank 450’s, all new lines, regulator etc.
That sounds too good😅
What’s the compression ratio on this beaut?
It’s about 10.7:1
Did you do the egr delete on it?
Didn’t come with egr.
Awesome!
What cam is in the truck
Tick stage 1 cathedral stroker
Torq storm needs to make a bigger supercharger
They have one in the works.
@@NorthernPerformanceCars good to hear that
It's been making power
They have twin kits that make over fifteen hundred horse power They also have the 91 that's good for twelve hundred
Zip tie some dry ice on the intercooler and run it again!!!!
What size injector is it running? Stock 36-38lbs tbss?
No. It’s running 96lb fuel injector development
That is a beautiful sounding exhaust! And this truck should probably perform pretty similarly to your new LS7 in the red truck, true Kenny? Assuming yes, this is a really nice (assuming quite a bit less expensive) way to get to a really great end product.
Yessir. This thing is a torque monster due to the whole combo.
It’s a 383ci stroked ls1 basically that we installed mid last year.
It’ll be a really close race between us I’m assuming.
We will give it a go when summer comes!
I think overall it’s similarly priced being it had a completely built engine etc.
but certainly easier for the normal guy to achieve. My cylinder heads cost as much as his plus the blower lol
Bottom end wise was similar cost.
So definitely splitting hairs.
@@NorthernPerformanceCars Thanks!
What exhaust set up does it have?
We custom made it. X pipe. Dual 3”. Vibrant full bodied style mufflers.
Nice brother
We get to have some fun at work sometimes!
What transmission is he running?
Built 4l80e
You think this would stay cool enough to tow with it on a lq4?
Depends on how cool u can keep it
Nice so whats the number?? Lol
636 rwhp.
Dick always tends to forget Dyno graphs lol
I've got a 2000 2 door I'm thinking of swapping over on an Escalade frame to get rid of the rear leaf's. Plus it's got a way better braking system than 6 cylinder truck does
That’s a cool idea. You should do videos on it. I’ll subscribe.
What drop does the truck have ?
🦍🙌🙌🙌🙌🙌🙌🙌🙌🙌