One thing that helps a lot with the 4l60e is a massive trans cooler. Mine used to keep slipping out of lockup once it got warm until I put the larger trans cooler in
I remember when I cammed my truck I was 15 and had stock 4l60e with stock converter and a pretty shitty tune for how big the cam is, when I got the tranny built with a triple disk stall and a good tune it was a night and day difference. I recommend anyone looking to cam their car do it right the first time with a good shop who will tune it right and pay for a stall.
Bro u made it already 🫡 keep grinding and don’t stop making videos and u gonna reach 50k subs soon 🔜 and never give up even if u feel like theres no point of making videos.
The 4l60e isn't trash, it's a great transmission, leave torque management in your tune, put a good aftermarket cooler on it, heat is the number 1 killer of them.
@@lamydora457definitely could. At least with mine I’ve had more troubles running it high speeds pedal to the floor kinda thing. Burnouts aren’t too bad, but they definitely won’t help in the long run
I got a lifted 08 silverado with 37s and its cammed and i went with a 3k stall and went with a 40k trans cooler. Bypass the radiator and it will last longer bc its cooler.
I’m building an LS swapped S-10 with a 4L65e and I’m using a huge aftermarket radiator without trans cooler. I’ve bought a 40,000 GVW trans cooler that I’m mounting under the bed, in the wind but away from debris. I may have to put a fan on it later, I’ll keep an eye on the temps.
My engine builder told me to stick with the 5.3 and go big with a power adder. Theirs more cylinder walls to play with compared to the 6.2. I have both the L86 6.2 in a 2015 with an 8 speed and a 2007 classic with the regular 5.3. Ima build it along with a 4L80, bug cam ported heads and a lot of nitrous.
Getting ready to order a chopacabra cam for my 2006 Chevy Silverado crew cab with a 5.3, also going to order some long tube headers with a borla exhaust kit hoping it sounds rowdy like yours 😈
I got lucky and got an 04 cateye with the trans cooler radiator and a rebuilt jeggs transmission, and the only issue I've had was the shift solenoid which a corvette servo did wonders in preventing again, also having a bad electrical issue with taillights, grounds gd fuses and switches gd so now I'm at the bcm as junction block is gd. BUT she looks so good with new headlights released by Z-OFFROAD LED Headlights Assembly. Even if I get rid of her with these electrical problems I'm getting another cateye so I can keep these headlights lol.
I just got mine back from the shop for a control shift solenoid issue, in drive my truck for some reason would only “ run “ in 2nd gear I would be slow af at takeoff from complete stop and would max out at 50mph and then out of nowhere it would fix itself and drive like there was no issue but now that I’ve gotten it back from the shop it’s a night and day difference!
Really good video of your pickup truck and he's trying to drive engine to thank you😊❤😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊 enjoy watching your video in Houston off your pickup truck in your engine and you're also your muffler of your pickup truck thank you❤🎉🎉🎉🎉🎉🎉🎉🎉
Do you know what numbers your pushing with the cammed truck?? * You should keep the v6 and put a BIG A$$ TURBO on the single cab - upgrade trans/ engine management/ fuel - dude on the real not a lot of people do this and it’s a really nice and easy build.. when/if the 6 goes then build the bottom end and throw it back in there wit more boost OR LS swap then
Nice truck bro… quick question my 2005 sierra 5.3 has 170k I want to put a cam in it should I rebuild the motor. It runs great im worried if I put a cam I might have problems later . Any suggestions or recommendations I will greatly appreciate it thanks
Gotta get it tuned right for cammed. You are indeed correct the 4L60 is a piece of shit excuse the language but I’m literally saying what it is. It’s fragile. The drive train is fragile. Seriously. I dealt with my families Tahoe. 2002 5.3. Rear end broke twice. Brand new transmission and it just shifts like shit. Shifts hardly. It’s weird! 285HP V8 with a crap drive train. It’s a shame. I’d beef your drive train up dude! Plus that motor some more. Save your money and work hard. I got a old 2003 ram with the hemi I work hard for since I was a teen. That truck is a monster. 450HP from 345HP. Bought it it had 390HP Has a tune, air filter (big K&N filter than the ones you see) exhausts (meh possibly a few horse) MSD ignition was like 15HP added could tell the difference! I did a tune up on it and some other crap I felt power difference for a while i had it at around I’d say 415hp. Custom intake manifold, throttle bodies, exhaust manifolds. Yeah Work hard bro keep at it save the moneys sweet trucks I like the old Chevys a little bit they are nice to drive
@@nbs.reyess yea plus get that drivetrain aftermarket or beefed up. Rear end, transmission. Etc etc. you’d get more reliability and tire smoke back there, plus more speed horsepower and the rest of that fun shit
Appreciate it brooo!! u help me find the issue for the truck, I just needed to buy a torque converter for my cammed since I had a stock and it will turn off on me .
Is this truck RWD or 4WD? I have an ‘06 Sierra I’d like to start building on, but I’m stuck between getting a different RWD truck or going with a built 4x4 tranny and going from there. I also haven’t considered the transfer case, if that needs to be upgraded or not.
Looks like it ready for bags that's a nice c notch .I want to drop mine with under bed notch I know it's gonna hit .I bet that set don't bottom out rides good
My 4l60s getting rebuilt Monday, I couldn’t settle with putting stock stuff back in it, so I got some raybestos stage 1 clutches and a vette servo, maybe it’ll last lol
One thing that helps a lot with the 4l60e is a massive trans cooler. Mine used to keep slipping out of lockup once it got warm until I put the larger trans cooler in
I remember when I cammed my truck I was 15 and had stock 4l60e with stock converter and a pretty shitty tune for how big the cam is, when I got the tranny built with a triple disk stall and a good tune it was a night and day difference. I recommend anyone looking to cam their car do it right the first time with a good shop who will tune it right and pay for a stall.
Hell yeah truly makes a difference bro
It’s nice driving a cammed truck . I get same gas mileage as stock too. I drive mines daily for work 100+ miles a day
How do you pass inspection and emissions??
@@lamydora457by moving tf out of Commiefornia
Bro u made it already 🫡 keep grinding and don’t stop making videos and u gonna reach 50k subs soon 🔜 and never give up even if u feel like theres no point of making videos.
Truly means a lot thank you bro🙏🏻
Such a sleeper bit so damn sweet bro!!! Love it. I'm 6.0 swapping my 07 silverado rn
i have a 07 sliverado also not sure if i wanna 6,0 swap it let me know how it went man!
@@efcoi2898sounds like it didn’t go good lol
@@deadbodybaby1 starting to think so also lol
The 4l60e isn't trash, it's a great transmission, leave torque management in your tune, put a good aftermarket cooler on it, heat is the number 1 killer of them.
@74mythos if i put a big transmission cooler on can i do burnouts without the tranny blowing up??
@@lamydora457definitely could. At least with mine I’ve had more troubles running it high speeds pedal to the floor kinda thing. Burnouts aren’t too bad, but they definitely won’t help in the long run
I already made my neighbor jump on a cold start just with straight pipes 😂 I would love to hear cammed with straight pipes. Maybe one day
I got a lifted 08 silverado with 37s and its cammed and i went with a 3k stall and went with a 40k trans cooler. Bypass the radiator and it will last longer bc its cooler.
I’m building an LS swapped S-10 with a 4L65e and I’m using a huge aftermarket radiator without trans cooler. I’ve bought a 40,000 GVW trans cooler that I’m mounting under the bed, in the wind but away from debris. I may have to put a fan on it later, I’ll keep an eye on the temps.
Sounds amazing on the cateye 🔥 would like to see a 6.2swap fbo 😁
Go big or go home 👀
I have a 6.2 single cab fbo nbs sounds amazing 👌
@@nbs.reyess put a 7.0 if you wanna go big
My engine builder told me to stick with the 5.3 and go big with a power adder. Theirs more cylinder walls to play with compared to the 6.2. I have both the L86 6.2 in a 2015 with an 8 speed and a 2007 classic with the regular 5.3. Ima build it along with a 4L80, bug cam ported heads and a lot of nitrous.
Getting ready to order a chopacabra cam for my 2006 Chevy Silverado crew cab with a 5.3, also going to order some long tube headers with a borla exhaust kit hoping it sounds rowdy like yours 😈
You right about the trans. Mine is down as we speak, it’s my 2nd trans
I'm surprised my neighbors didn't trip because I used to have a stage 3 cammed silverado with header dump and I would rev it and drive it all the time
I got lucky and got an 04 cateye with the trans cooler radiator and a rebuilt jeggs transmission, and the only issue I've had was the shift solenoid which a corvette servo did wonders in preventing again, also having a bad electrical issue with taillights, grounds gd fuses and switches gd so now I'm at the bcm as junction block is gd. BUT she looks so good with new headlights released by Z-OFFROAD LED Headlights Assembly. Even if I get rid of her with these electrical problems I'm getting another cateye so I can keep these headlights lol.
Bro I went with those headlights and aftermarket taillights. I sealed all the connectors and it fixed the problem.
I just got mine back from the shop for a control shift solenoid issue, in drive my truck for some reason would only “ run “ in 2nd gear I would be slow af at takeoff from complete stop and would max out at 50mph and then out of nowhere it would fix itself and drive like there was no issue but now that I’ve gotten it back from the shop it’s a night and day difference!
Seen that truck this past weekend. Looks clean.
I’m located in Houston as well
What transmission shop do you recommend for custom work?
Wearing airpods while listening to the chopping cam, heaven.
Really good video of your pickup truck and he's trying to drive engine to thank you😊❤😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊 enjoy watching your video in Houston off your pickup truck in your engine and you're also your muffler of your pickup truck thank you❤🎉🎉🎉🎉🎉🎉🎉🎉
Truck is literally super clean bro 🤘🏻
I have everything to cam it should be doing that soon and throw some power at it sounds good bro keep it up 💯👌
its not turning of cuz of the stock trans, its stalling out cause you dont enough stall coverter
Ls3 would be sweet 🔥 like you said “go big or go home”
That’s right 👀🔥
Do you know what numbers your pushing with the cammed truck??
* You should keep the v6 and put a BIG A$$ TURBO on the single cab - upgrade trans/ engine management/ fuel - dude on the real not a lot of people do this and it’s a really nice and easy build.. when/if the 6 goes then build the bottom end and throw it back in there wit more boost OR LS swap then
Nice truck bro… quick question my 2005 sierra 5.3 has 170k I want to put a cam in it should I rebuild the motor. It runs great im worried if I put a cam I might have problems later . Any suggestions or recommendations I will greatly appreciate it thanks
That sounded fuckin amazing. Can't wait to pick mine up soon
bro your up next , support from Cali bro 🔥🔥
Sounds wonderful bro 👍🏽
If you cam the motor always change the torque converter..
My fav truck in Houston 🔥🔥🔥
Thanks bro💪🏼
makes me miss my crew cab gmc cammed out 😭
Gotta get it tuned right for cammed.
You are indeed correct the 4L60 is a piece of shit excuse the language but I’m literally saying what it is. It’s fragile. The drive train is fragile. Seriously. I dealt with my families Tahoe. 2002 5.3. Rear end broke twice. Brand new transmission and it just shifts like shit. Shifts hardly. It’s weird! 285HP V8 with a crap drive train. It’s a shame. I’d beef your drive train up dude! Plus that motor some more. Save your money and work hard. I got a old 2003 ram with the hemi I work hard for since I was a teen. That truck is a monster. 450HP from 345HP. Bought it it had 390HP Has a tune, air filter (big K&N filter than the ones you see) exhausts (meh possibly a few horse) MSD ignition was like 15HP added could tell the difference! I did a tune up on it and some other crap I felt power difference for a while i had it at around I’d say 415hp. Custom intake manifold, throttle bodies, exhaust manifolds. Yeah
Work hard bro keep at it save the moneys sweet trucks I like the old Chevys a little bit they are nice to drive
Highly agree on the tune, thanks for leaving a comment , very interesting 💪🏼
@@nbs.reyess yea plus get that drivetrain aftermarket or beefed up. Rear end, transmission. Etc etc. you’d get more reliability and tire smoke back there, plus more speed horsepower and the rest of that fun shit
if you listen to this shit with a pair of good headphones that shit sounds like you are right there with the truck that shit sounds sexy asf
Just bought a cateye 4 door chevy 2007 kinda like yours yesterday in maroon im very happy with it
They’re great trucks , you’ll have a lot of fun with it bro 💪🏼
@@nbs.reyess thanks ill be watching your channel for ideas
Appreciate it brooo!! u help me find the issue for the truck, I just needed to buy a torque converter for my cammed since I had a stock and it will turn off on me .
Love the looks of your truck. What are the specs on your wheels and your drop?
How tall is your notch? and how tall does the notch stick out the bed. 7/9 drop?
Is this truck RWD or 4WD? I have an ‘06 Sierra I’d like to start building on, but I’m stuck between getting a different RWD truck or going with a built 4x4 tranny and going from there. I also haven’t considered the transfer case, if that needs to be upgraded or not.
I wish Chevy would do some about the transmissions my 2018 40k miles fucked up
DaaaYuuum homieeee that sounds Bad to the BONE!!!!
Looks like it ready for bags that's a nice c notch .I want to drop mine with under bed notch I know it's gonna hit .I bet that set don't bottom out rides good
Wat kinda exhaust setup you have ????
Can you make a video how you wired up the DRLs to be on with the turn signal and park lights on the single cab?
Where you get your drop in Houston and how much did it run looks clean bro
4.8 wih a turbo for the single cab
Show us how good that cutout switch works looking into that sick truck btw
Did you notice any difference with that K&N intake?
What drop in the rear on the crewcab bro? Did you fix the Chevy lean if so how did you fix it? Man.
Do a video of you driving around the cat eye
on the tour converter did it make a HUGE difference ?
aye bro what about your drive shaft? is it stock or custom cus i heard a lot of people say that the drive shaft be going out
A 6.2 would sound nice
Sounds like a washing machine. kids with a 4L60E, lol! Time to step up. 4L79E all day, everyday!
I’ve never cared about my neighbors ef them my other truck is a Cummins straight pipe usually warm it up for 15 minutes before I go
🔥keep it up padre !🤘🏼🧿
Is that straight piped..?
Yeah my 4l60E is beat all to hell, I want to go up to an 80, but I'm sure there's a better option out there
With a good tune on a 4l80 they can be mean
Trans cooler and a corvette servo with stall
grind down them tips everytime you floor it
I have a single cab same color and crew cab same color we got the same set up going.
whats the shop you took it to name again?
@NBSReyes Give me your top two cams in your opinion and what tires are you running?
almost loud as stock 6L cold start
Sheshh sounds clean.
Thanks pa🫶🏼
What’s the cost for camming and trans build?
What if you put a cam but you don’t abuse your truck. Can you still leave the 4l60 transmission?
I have a cam myself 6.0 supercharged stage 3 cam with 4l60e trans cooler,shift kit and corvette servo
Aw my bad and I have a 3k stall
Converter
Your missing your rubber hood Cushings that go in the fender. The shop probably knocked them off.
6.0 swap on the single cab 🔥🔥
Yall sleep on the Ls1…. I be gappin 6.0’s all day with my 5.7🙏🏼🗣
Same setup i have! Sick video!
Put a 5.3 with a 4.8 crank and 4.8 pistons
Sounds Badd Ass 👍
I have a 260xxx miles on my Tahoe , will it be a good idea to cam it ?
Pretty high mileage might not be worth it to be honest
Fastest cateye crewcab in Houston
Exhaust set up?
How do you say the uprade ? Cam your truck ?
what exhaust you have ??
What cut off system do you have for the exhaust
Have you tried fixing the fitment on the headlights for the bubble eye?
Not yet
4.8 with baby turbo on single cab 😤
🤔🤔👀
LQ9 6.0 LS with a 4L80 trans
Either go 6.0 or 6.2🔥🔥 make it a zl71 💯
on the bubble eye do a 4.8 turbo swap
What’s ur wheel size and tire size with drop fitted looks clean
22s on 265/35/22 with 5/10 drop
Where did you get the 4l80e?
What’s the shops name? I’m trying to get my 6.2 cammed
What headers does it got and what brand ?
Truck looks real nice man , what exaust do you have on it and which exhaust do you recommend
I have borla xr1 with cutouts , I really like the magnaflow bullet tho sounds nice I recommend it
Hey I'm totally new to cams.do u have to tune your motor?
Yes
What are those rims?
Hey what’s your wheel specs ?
Do nv3500 trans or there are rebuilds to race build it
clean afffff
😍😍😍
Por que no le pones rines infamous staggered a las 2000
What’s that paint code?
6.0 wit bfd chop monster
For the single cab
my only question is, si quema cuh???
sounds beautiful
My 4l60s getting rebuilt Monday, I couldn’t settle with putting stock stuff back in it, so I got some raybestos stage 1 clutches and a vette servo, maybe it’ll last lol
Don't count on it!
Trans cooler with a stall converter and
What drop do you have 4/6?
5/10
6.0 with a stage 3 cam or a 6.2
Yes sir cool trucks 👍
😍😍😍😎😎😎
damnn i wanna cam my bubble eye even more now😩