Thank you for the feedback EGGRO VR, we have passed a lot of feedback to the team to help with multithreading tuning, hopefully we can see more improvements in future updates. Best regards - Bignewy
Thanks BIG 😊 and welcome to Eggro VR . Also thank you btw ! Your input on this Sim is always on point , and educational for all of us flight simmers . I really appreciate your feedback, and look forward to all of the updates from ED .
Absolutely the best Quest 3 guide made. I was about to return my headset until a friend sent me this video. Everything is very much on point now. Thank you.
Just recently updated Windows/Nvidia driver and lost all my Nvidia/graphics settings. Gave it a shot resetting myself and was only getting 45 FPS max (Ryzen 9 (5900),Rtx 4080Super, 64 Gb Ram, HP reverb G2) for a couple weeks. Followed you guidance in this Video and was up to a consistent 90 FPS and looking great. Occasionally getting 10.0 and over of APP Gpu, so I might have to dial a few things back. Thanks !!!!
Huge thanks 😊 Not a problem , I really actually enjoy making these videos ! Welcome to Eggro VR btw:) Thanks again for the visit and sub , also the kind words . Please enjoy Fly safe 🦅
You sir are the puter hero of my day. I've spent thousands for this cough simulator. With much disappointment. Think 1080 gpu pc, to 3080, to 4090 and I just today feel like it's coming together. Thank You.. I didn't know such setting exist. Modern day hero walking. please clap.
Ok, after messing with settings now for over a month, following every contradictory guide and YT video, I have hopefully figured it out for my system...maybe it will help you: 4070ti/5800X3D/32GB RAM/W10/Quest 3. I did have a 5600X, and it was fine too...the 5800X3D upgrade is HUGELY over-rated, and actually drops frames in some games from the 5600X. The very first thing to do is set it to VR graphics in the DCS system tab. Then go up from there, seeing if you like DLSS or MSAA. I settled on 2X MSAA/PD of 1.1 (in-game setting), textures both on HIGH, clouds HIGH, view distance HIGH, shadows MEDIUM (and Flat for objects), water LOW/MEDIUM. These are the big ones. There are other settings like grass that I just turn OFF because if it's on at all, you get micro-stutters on the terrain, even up high. The only thing that smoothed out the experience to give me a steady 72 FPS and no more stuttering was setting the Encode Bitrate higher in ODT (as he does in this video). I started at 960, and have dropped it to 500 now and I don't see any difference between the two, but I am still testing. Magically the stuttering stopped! OpenXR Toolkit/Tray Tool, all that nonsense made ZERO difference. The only thing nice about the Toolkit is the ability to adjust the picture (saturation, etc.). Turbo mode did work, but now it just freezes and crashes DCS, even when you set it in the menu before loading into a module. Do these things first before pulling your hair out trying to figure out the utter sh!tshow that is DCS VR and the clown comments you'll get from the no-life trolls in the ED forums.
Im going to try this soon. I have a 3080, ryzen 5 5600x, 32 ddr4 ram, and a quest 3 headset. Would I need to upgrade my cpu? If so, what cpu would I need to get?
The cable is gigabits (1/8th of a gigabyte) per second, not gigabyte. You can tell by the small b vs the capital B. It's tradition to measure networking in bits rather than bytes for some reason. Most of the time the difference doesn't matter, but I have seen people get confused by it since a lot of systems give you download rates in bytes, so people wonder why their 80Mb/s connection keeps maxing at 10MB/s and things of that nature.
Thanks for all of your good advice. I have one for you as well. You can get yourself an aftermarket cable they are lots faster than the data cable that they sell. I just bought a cheap data cabel from my local store, I got 2.7gbs wit that.
Hello Ludos and welcome to Eggro. Thank you for the kind words btw 😊 May I ask which brand cable that you bought ? I ask this, because it is a bit of a crab shoot ...on purchasing these link cables . Where some cables produce better results that are available in the wild, but there is so little information regarding reviews . Thanks again for the advice : I am in the market for a link upgrade :) Fly safe 🦅
Good job, thank you. Be great if you could do one with after the next update since DCS (now unified, no more beta) is eliminating the separate MT exe.. All in all a lot of good stuff here, and I don't have an Q2 or G2 (Varjo).. also OXRTK is no longer supported and can cause issues..
You were talking about upgrading beyond 32GB of ram. I have the 12700k with the 4090. I've seen DCS using over 34GBs during big battles on my PC with 64GBs.
Yes , I will be upgrading to either 64 or 128 Gb of D5 Ram because ...as you said , this Sim in a heavy MP or any mission with Multiple Assets demands more than 32 Gb ...which I believe to be the Bottleneck now in my system . Other than that , my PC is easily up the challenge ... atleast for now 😀 I hope that you enjoyed the video , and thank you for the view and comment . Fly safe 🦅
Greetings EGGRO! Fantastic video, which has helped me more than any video thus far! Would you be so kind as to instruct me how you get your VR hands to work in cockpit without the pointer? It appears you actually use your fingertips to adjust the mirror and some of the buttons and switches. Yes, I do have a high-fidelity airframe, the F-15E by RAZBAM. . . Thanks for any help.
Hello Aries : Thank you for the feedback ! I'm happy that this guide worked well for you . As for VR hands without the pointer , just apply the same settings as I did near the end of the video . The reason that you don't see the pointer , is that I simply just pull the action trigger near the dials , although I could just as easily use the pointer at a distance. Just point your Index finger , where you would like to interact with the A/C cockpit and press the action trigger . I hope that helps . Please enjoy , and fly safe 🦅
HP G2 Why does Crazy settings Work? Set First Regedit Window to run with all cores unlocked, Set OpenXR Developers Toolkit for windows Mixed Reality Custom Render setting to 190% NEXT Inside OpenXR Toolkit Companion Set Turbo mode ON then Make sure Custom Resolution override is ON and set the 1st resolution to 4090 the second number will auto set so do not worry about it. NEXT Inside DCS turn DLSS on and set it as you wish BUT also try just using the others as a test also later. My GPU is a 4090 Aero and my CPU is a AMD 5800X3D and 64G of System Mem. I get the Sharpest VR settings in the HP G2 almost like it changes the headset into a new more powerful version. I have the Sharpest in the Cockpit settings this way and FPS in DCS 2.9 I have NOT capped my FPS yet but that is my next test to make.
Hey Bro. I have nearly the same Setup. 7950X3D is the differenz. I like Reverb G2 ver much. i have rendersettings in Open XR 150. So sharp and of course with Mods for the G2. I can not believe that Q3 works so good with same Picture Quality as G2. I can live with the FOV. Crystal is too big. Thats a stone. Yes the best Picture but with problems too. What should i buy? Nothing on the Market as Alternative with DP Port to Crystal.
@@michaelduernecker684 My Only VR headsets have been Oculus Rift S then the HP G2 so I honestly can not say. I have seen bad and good things about Crystal. I don't think I would buy one but What do I know.
Hi there GREAT VIDEO Thanks. Could you tell us where to get that nice overlay for the Reverb G2? Not Steam. I am using DCS stand alone version. thank you so much 😊
I will eventually if I am able to get my hands on the MP3 :) I would be more than happy to provide a settings guide for said HMD , although I opted for the MQ3 instead ...but these settings for the MQ3 in this video , should absolutely work with your HMD. I think that if you give these settings a try , you'll be amazed how well this works . If you have any questions while troubleshooting through this guide for your headset , please feel free to comment again . I will be here to help . Thanks again, and as always, fly safe 🦅
Quest Pro settings should be similar to Quest 3. Have both, but actually prefer the QP due to being able to peek at keyboard and with a modified head strap, it's more comfortable.
You haven't mentioned what Battery life you are getting from the Quest 3 running at 90fps I've found it will drop you to around 2 1/2 hours, which isn't acceptable. Locked to 72fps I can play indefinite
Hi Eggro VR Another excellent tutorial. I am going to spend some time checking,/adjusting my settings. I have the HP Reverb G2 and a pretty much identical PC as you, as you know, so it should be easy to follow. I have a question about Process Lasso - when I run it do I need to be in a mission in DCS or just have DCS running? I tried it last night and with a mission running I ended up chasing the bars along until I got bored! I got up to processor 13, and if I disabled that, it just jumped to 14. I wound it back and disabled 1 - 8 as you did originally. Regarding overclocking, I changed the settings on both my CPU and GPU having followed your tutorial some time ago. That was the tutorial where we changed the GPU fan settings to max them out. Is there a way of putting the CPU and GPU settings back to default. I believe we used EVGA Precision X1 for the GPU and MSI Afterburner for the CPU. Again, nice work my man, and thanks again. BTW - my Bigscreen VR is on it's way 😁 Nial
Very nice on the Big Screen Beyond:) I'm excited for you , my friend 😀 That HMD runs with the best VR HMD's today ! Regarding your CPU OC , the best way to set this back to default is from your Bios . Just restart your PC , spam delete key , and click the f5 key to reset to default, then f10 save . After your PC restarts , you will have to adjust your XMP profile again and any other adjustment from your Bios that your comfortable with, for your configuration. With regards to Process Lasso , I wound up chasing Cores 8-11, and then had to park Core 3 too lol 😆 Which in my case solved the issue , but I have read tons of posts regarding the MT tuning and it will be resolved in the near future . Maybe try just parking Core 8 and see if that solves the issue with Micro Studders . I realize that your preference, like me , is to keep using Edge 2.9 with the features available , yet some report that rolling back and not using Open Beta , did resolve the issue ...which for me , I did try , and it does really work perfectly ...minus DLSS and the other features . The GPU OC from X1 , should just reset back to default with each time you exit the app, but if you have set to permanent, just disable that and reset the app. I would just use a custom fan profile, which will only ramp up during heavy sessions of Simming . Please keep me posted , as to how the Beyond plays with this Sim . I have only heard good things about that HMD ! Thank you so much for the view and the kind words , my friend . Hopefully this helps you out ! Fly safe my man 🦅
Definitely VD if and when I play wireless PCVR Sims . For me ,Virtual Desktop is the best option with the best streaming service and visual quality of the two!
@@eggrovr2733 actually i get better picture quality with VD wireless, than OqulusLink by cable. I have now idea how they did manage that magic 200mb bitrate win against 700-900 of Oculus cable.
Hello and welcome : The Overlay that I use in the Sim is OXRTK ...but the Overlay that I always use , is MSI Afterburner ..so that I can keep an eye on GPU / CPU usage ect as well as Temps / Ram / Vram and power draw. I hope that helps to answer your question . Good luck Fly safe 🦅
DCS vr for me is unusable as far as dogfighting is concerned. I can get the cockpit to look great, but anything beyond my wingtips is a blurry, shimmering, semi-transparent mess. I can't distinguish any aircraft type until they are very close, like 300 meters/yards away. At 3/4 of a mile (1.2km) an aircraft appears as a perfect little black square!? I can get 45-90 fps, 5-10ms frametimes, but nothing so far makes any difference to the quality of other aircraft appearance. I've spent more than 30 hours trying different settings and guides over the past 6 months. I have : I9-11900k / 3080ti / 32mg 3600 ram / reverb G2 / 1tb ssd / open XR + toolkit Does anyone have any advice ? Thanks in advance.
@@bricktopperheadon5490 he has one vid that explains he prefers his track ir but he put out another that talks about how he was able to obtain his VR goals so don't get hung up if you see the 1st video bf viewing the more recent vid(s)
Hy thank you for your tutorial. I'have a G2 for DCS and Q2 for the family. I'm wondering If I sell both and by a Q3. Q3 is better than G2 ? I have a RTX3070ti and I would like to upgrade. What do you think about RTX4070Ti 12Go is enough ?
Hello ,and thank you so much for the view and comment 😊 If you were to upgrade your GPU , I would consider the 4080 over the 4070ti just for that extra Vram and HP. That said , I would keep an on sales for either of those GPU's and pull the trigger when you're ready. With regards to the Q3 over the G2 , I wouldn't say that it's better than the G2 but an entirely different beast . The G2 is far more comfortable / has a slightly higher resolution albeit ...a very small sweet spot / way better over ear speakers / is PCVR/ over compression (MQ3) Yet the Q3 has edge to edge clarity / pancake lenses also if you don't mind compression, than the Q3 is a safe bet. The motion reprojection/ASW.. is far better than that of any other HMD that I've tried , so far/WMR. Also, please be aware that I've had 3 Q3's and all of which have had issues with either overheating and stuck pixels . Honestly It's really hard to recommend the Q3 for now because of those issues . If you do pull the trigger , and get a Q3 , please check for stuck / dead pixels because there are a lot in the wild as of now . All that aside , the mixed reality feature is pretty cool and having that XR2 Gen 2 Chip with some new Q3 updated games on the horizon for me was a no brainer . Ultimately , it's for your use case scenario...but in my, case the Q3 has been pretty awesome for DCS VR and every other PCVR and stand alone game so far! Thanks again : Please keep me posted as to your final choice and if you have any other questions , always feel free to comment . I'll always do my best to help . Good luck my friend : Fly safe 🦅
@@eggrovr2733 thank you for your answer; I 'll try to find a 4080 but is very expensive regarding the 4070Ti. The sweet spot of the G2 is the biggest problem of this Headset so perhaps I will switch. I let you knowe when I make my choise.
@@gab973 Hi I have a 4070 Ti as here in Australia at the time of purchase (About 6 months ago) the 4080 was way too much. I have DCS but not currently installed, however I play Balders Gate 3, Starfield and Red Dead Redemption all mainly on Ultra settings. I haven't as yet tried VR I'm still reviewing all I can for the Quest 3.
@@gab973 currently I would wait with your GPU purchase. nvidia will bring out the Super variants soon, so you would be able to buy 4070Super which will be around 4070Ti power for the price close to the 4070. The 4070Ti Super will do the same but close to performance of 4080. It will also shuffle the prices of remaining stock of non Super cards. nvidia is expected to do so around CES in January, so I would wait...
I also have a 4090 and my Quest 3 is coming. DO you recommend going for 90hz instead of the default 75? doesn't the quest lose resolution or something at that refresh rate? Thanks, I don't know if im confusing stuff but i'm running my RiftS at 45hz
Hello and welcome :) My opinion is that 90 Hz is optimal , although yes I do agree that if you do lower your HMD to 72 Hz , you can bump up your graphics , yet with the OXRTK and the 4090 , I say why lower your Refresh Rate when a stable 90 fps is easily achieved with this guide . All in all, try both and see which suits your needs better . I think that you will find that 90Hz just looks SO much better ! Good luck Alpen 😊 Please enjoy and fly safe 🦅
@vrbublik Yes sir :) I couldn't agree with you more .That is precisely why I always aim for 90 Hz / 90 FPS and up if possible . I am also prone to head aches ,which is why in every video ... I share how to get 90 FPS and stable for most hardware . Fly safe 🦅
With your visible range set all the way to low, which I think is horrible, this tremendously relieves load off the CPU GPU when playing dcs. I'd be curious to see your setting Max or just one step below. Where I currently have mine. It's nice to look out and not watch stuff being built in front of you as you're flying. I find that incredibly annoying. And mostly unrealistic.
Hello William, I thought that I brought that up in this video . Well , either way , I do bump that up depending on the map or module that I fly . Also, that statement is rather vague, because there are so many variables with regards to setting adjustments for this Sim in VR and the effects on your Frametime and stability . It seems that a lot of folks claim that they max their settings and still maintain stability 🤣 with no proof to share with the community. That said, I can easily max my settings with ASW locked @ 45 FPS, and mostly maintain stability ....but motion reprojection comes at a cost . Anyway , thanks for the comment and view . Fly safe 🦅
I'm still figuring out whether I like the Q3 over the G2. For the G2, I had 1.0 PD in the OXR Tools, and a 1.1-1.2 in the DCS PD. This gave me a very clear and crisp setting. (This was even with DLSS on) For the Q3, to even get close to the same clarity in the center, I had to set my PD (in ODT) to 1.4 and my DCS PD to 1.3, and it was still a little blurry No clue what I was doing wrong. A secondary question, do you know if the "Pixels Per Display..." value stacks with the "Graphics Preferences" resolution (ex. 1.0-1.5) in the Oculus program, or does it override the other?
Hello : Welcome to Eggro VR . At first , I was on the fence also ..whether to even buy the Q3 . Now that I have, and have tested between the G2 and Q3 ...honestly I would not go back to Fresnel Lenses and the small sweet spot on the G2 , but with regards to the clarity and lack of compression on the G2 / DP cable ...it's a hard sell . I for one , really enjoy the Q3 / edge to edge clarity ( pancake lenses ) yet even still the G2 at the center focal point has it beat , and being solely a PCVR HMD wins in that aspect too...without the need to stop for a recharge 😅 Regarding PD on two different apps 🤔 Honestly just set one or the other . I have to ask what is your Render Scale @ in OXRTK set to , for the Q3 ? Maybe , try to bump that up if you have the headroom to do so , which will yield better visuals in your Q3 . Thank again for the visit and comment . Please enjoy : Fly safe my friend 🦅
Ey Egg, as per usual this helped me a lot again. Running over Dubai low level with solid 45 fps and crisp graphics. Cheers. Question though: afterburner tells me im gpu bottlenecked (rtx3080) running at 98% most of the time. My cpu (ryzen 5 7600x, with 64gb ddr5 at 4800) runs at around 50%. Thing is… should I invest in a new gpu (4080 or something like that?!) or would a different vr headset (currently a Reverb G2) be a better investment?
Hey Bjorn and Happy Holidays🎉 I'm very happy that this guide was able to help you to achieve stability. Regarding your GPU (3080) is still a Very good GPU btw, and I would consider an upgrade soon , yet the 50 series is not terribly too far off and with that said , the 40 series will drop in price by then , to which I would pull the trigger on either 50 series or an RTX 4090 , just for that extra VRam. It's hard to recommend an HMD ATM over the G2 because the G2 is still very relevant . The MQ3 has been awesome for my use case scenario, and for DCS it's an upgrade over the G2 although most folks would disagree because of the compression 😮 That said the MQ3 with the settings provided in the video ...absolutely blew me away. Please enjoy the holidays and as always : Fly safe 🦅
@@eggrovr2733solid advice buddy. Ill hold out a bit and start looking into them gpu’s in a bit. Also saw the MQ3 and it’s on my list along with a Pimax Crystal. Guess both would benefit more from a better gpu. All the best for the new year and as always: Party safe 🎉 😊
I have a quest pro and any bitrate over 650 i get audio stutter using official meta cable. Similar system 13900k and 4090 but im seeing a lot of intermittent stutter while flying in multithreaded version of dcs..doesnt happen in single threaded and i also tried unparking all my cores, shutting down efficiency cores, etc.. still stutters and eventually it becomes really bad after soemtime as if dcs has a memory leak.
Hello : Welcome to Eggro VR . That's funny that you bring that up , as I experience the same issue with audio studder with anything over 600 bitrate. I have tried different ways to adjust for the intermittent studder on DCS MT version 2.9 , with even going back to ST version of this Sim / disabling HT in bios ect and of course core parking using Process Lasso , which in my case provided the best results without having to roll back . Please enjoy : Fly safe my friend 🦅
@@eggrovr2733 Thanks about processor lasso. I downloaded it and noticed in VR same as you CPU 8 was at 100%, parking it then resulted in CPU 9 was at 100%..each time I parked one of these it went all the way up to CPU #11. After all these were parked, then I saw one of the random e cores was at 100%..not sure what it means but it looks like DCS MT version is not sharing proper load for me and my 13900k. Always at least one core at 100% and others just not doing much. In VR I'm seeing only about 5% CPU usage.
@salimelayan6290 Hey Salim :) It definitely is an issue with Core usage , and as you saw in this video ...I experienced a very similar result , having to chase down cores to finally manage without studders . It sounds like this issue for you isn't resolved by this method though . I would encourage you to roll back the update if your still experiencing micro studders . Which sort of blows 🤔 but I have tried the roll back and ...it does alleviate the issue at hand , without having to disable cores . Atleast this way, you can still enjoy this Sim until this issue is resolved . Please be safe and as always : Fly safe 🦅
Hello and welcome, Firstly, launch DCS in 2D on your monitor and go to the settings icon. From there, check ✔️ ✅️ the box that says launch in VR. After that is done, follow the step in this video, particularly on the part where I enable my VR hands , and try to un-check your Virtual Hands. Also...if you are launching via link/ PCVR, please be sure to use USB 3.1 port and a compatible cable. Also, maybe unplug your HOTAS and try to launch DCS in VR again after those steps, just to try and troubleshoot the issue. I would try disabling any Bluetooth devices that could be interfering with the Sim and launching in VR. I really hope that this helps to alleviate the issue. If not, please feel free to comment again and provide all of the steps that you have tried thus far. Thanks for the view and comment, Please enjoy and Fly Safe 🦅
This is all very confusing having just watched this and being shown that parking cores helps, I then watch reflected's video where he shows an app that unparks the cores to increase performance. 😅😅
Hello and welcome :) My PC specs are : MSI Gaming X Trio 4090 I9 13900k 32 Gb Corsair Dominator Platinum R5 3 Tb WD Black Sn 850 1Tb Adata external SSD 1000 W Corsair Rm 1000x Asus Z690 Hero Maximus Mobo Corsair H150i Elite Capellix Corsair 5000x RGB Case
I have a i7 9700k with 2080 super and only 16 gig ram. I'm amazed I can actually run dcs smoothly locked at 45 in VR. How is it that a bunch of you with 4090's have stutters. That makes no sense at all
I don't understand the 90fps magic number fever, specially with a 4090 and a quest 3. With quest 3, with the incredibly smoth ASW you don't need 90fps to have a butter fluid experience. It's like missing the amazing experience you might have with ultra settings and the same fluid experience in the combo 4090/quest (3 or pro)
Thanks for video I got my 4090 and reverb g2 running butter smooth weird as I was lead to believe that if your headset was running 90hz you limit your frames to 45fps but not here 90fps is a lot smoother Shame mfs2020 is not optimised like dcs As I was seeing double vision with my other settings Now I can feel like mavrick cutting the grass on the hills with my F18 Thanks
Create server on pc you run the game. CPU problems all go away as it forces dcs to use multiple cores. It will ease any cpu bottleneck almost completely. P.Lasso can cause major issues with your pc semi-permanently so careful what you do in there guys.
Hi Sam, Thanks for the view and comment. Could you share your vast and extensive knowledge with the community as to how an application such as Process Lasso, that operates solely at the application level can cause permanent damage to a PC ? Yes sir , by creating a server , could and most likely would allieviate the CPU bottleneck . That is something that I have not had the chance to navigate yet , but if there are alternatives ... I would love to investigate and share my results with the community . Thanks for the visit 😀 Fly safe 🦅
I don’t agree about MSAA for DCS it induces a lot of flicker that breaks the immersion and in addition it requires a lot of ressources. TAA with a sharpening of 0.7 is MUCH better ……
HELP!!!!!!! My G2 only runs at 60hz now.... I don't know what happened.... Been running at 90hz for 2 yrs and now only 60hz..... Anyone else having this problem?
Be aware...the Oculus quest app V63 and DCS are not compatible anymore...crashing on startup in VR. Read in DCS forum. I'm one of the affected. No solution yet. Is going to take some time.
I dont get the point for using VR. I did use VR with DCS and i dont want to low down my settings with my NASA PC. I did not invest thousand of dollars to play on low resolution. The other thing is, how many hours do you play DCS pro session? When i play Multiplayer as example, i need 2-3 hours at last. Now imagine to wear a VR Device 3 hours? I did so and my headache was like the worst i ever had, my eyes were red like devil and i always felt sick. After playing in VR i was not able to read text on my monitor. when you wear VR Device, those two monitors are 2-4 mm from your eyes, imagine you look on your pc monitor from 1 cm?? VR is nice, but it will damage your period if you use it regular. Go back to trackir and big monitor, thats it. You can enjoy DCS in Ultra Settings without issues. Why you guys stuck on VR? I tried it and i regret. Btw i believe VR is good for real pilots when they start training, then can use VR for 30 Minutes to train some skills or to learn the system. I saw many videos from real pilots using VR for training. After training they go fly in real, so there is no issue.
Hi, is there any way to disconnect the Cursor from VR Head set. And only control it with the mouse? My cursor follows wherever i look and i have to be extremely precise.
Thank you for the feedback EGGRO VR, we have passed a lot of feedback to the team to help with multithreading tuning, hopefully we can see more improvements in future updates. Best regards - Bignewy
Thanks BIG 😊 and welcome to Eggro VR . Also thank you btw !
Your input on this Sim is always on point , and educational for all of us flight simmers .
I really appreciate your feedback, and look forward to all of the updates from ED .
Reverb G2 settings start at 29:06. Great video!
Welcome to Eggro VR
I appreciate the compliment 😊
And the view .
As always ,fly safe 🦅
Absolutely the best Quest 3 guide made. I was about to return my headset until a friend sent me this video. Everything is very much on point now. Thank you.
EGGRO, Thanks to your video I am at 91 fps on DCS !!!
Hello mate, thanks a lot for the video I’m hitting 90fps stable and it’s running smooth as butter now.
Thanks again
Great Video, thank you for still testing out settings for the reverb g2!
Just recently updated Windows/Nvidia driver and lost all my Nvidia/graphics settings. Gave it a shot resetting myself and was only getting 45 FPS max (Ryzen 9 (5900),Rtx 4080Super, 64 Gb Ram, HP reverb G2) for a couple weeks. Followed you guidance in this Video and was up to a consistent 90 FPS and looking great. Occasionally getting 10.0 and over of APP Gpu, so I might have to dial a few things back. Thanks !!!!
Hey man! HRP Wolf here... Good video! Very complete and usefull! Tks!
Huge thanks 😊
Not a problem , I really actually enjoy making these videos !
Welcome to Eggro VR btw:)
Thanks again for the visit and sub , also the kind words .
Please enjoy
Fly safe 🦅
You sir are the puter hero of my day. I've spent thousands for this cough simulator. With much disappointment. Think 1080 gpu pc, to 3080, to 4090 and I just today feel like it's coming together. Thank You.. I didn't know such setting exist. Modern day hero walking. please clap.
Ok, after messing with settings now for over a month, following every contradictory guide and YT video, I have hopefully figured it out for my system...maybe it will help you: 4070ti/5800X3D/32GB RAM/W10/Quest 3. I did have a 5600X, and it was fine too...the 5800X3D upgrade is HUGELY over-rated, and actually drops frames in some games from the 5600X.
The very first thing to do is set it to VR graphics in the DCS system tab. Then go up from there, seeing if you like DLSS or MSAA. I settled on 2X MSAA/PD of 1.1 (in-game setting), textures both on HIGH, clouds HIGH, view distance HIGH, shadows MEDIUM (and Flat for objects), water LOW/MEDIUM. These are the big ones. There are other settings like grass that I just turn OFF because if it's on at all, you get micro-stutters on the terrain, even up high.
The only thing that smoothed out the experience to give me a steady 72 FPS and no more stuttering was setting the Encode Bitrate higher in ODT (as he does in this video). I started at 960, and have dropped it to 500 now and I don't see any difference between the two, but I am still testing. Magically the stuttering stopped! OpenXR Toolkit/Tray Tool, all that nonsense made ZERO difference. The only thing nice about the Toolkit is the ability to adjust the picture (saturation, etc.). Turbo mode did work, but now it just freezes and crashes DCS, even when you set it in the menu before loading into a module.
Do these things first before pulling your hair out trying to figure out the utter sh!tshow that is DCS VR and the clown comments you'll get from the no-life trolls in the ED forums.
very similar setup, I am going to try this soon!
Im going to try this soon. I have a 3080, ryzen 5 5600x, 32 ddr4 ram, and a quest 3 headset. Would I need to upgrade my cpu? If so, what cpu would I need to get?
@Jahart450 No, as I said in my initial post, your CPU is fine. That's what I was initially using. The GPU is far more important.
The cable is gigabits (1/8th of a gigabyte) per second, not gigabyte. You can tell by the small b vs the capital B. It's tradition to measure networking in bits rather than bytes for some reason. Most of the time the difference doesn't matter, but I have seen people get confused by it since a lot of systems give you download rates in bytes, so people wonder why their 80Mb/s connection keeps maxing at 10MB/s and things of that nature.
Love to see an update to this video if you think there should be one.
Wow! Now it runs very smooth! Thanks a lot. Can you do that same magic for MSFS 2020 please? 😅
wow, what a useful video! thank you m8 -> subbed
I follow you with interest and you are very kind to share your knowledge with us. Thank you
Thank you so much , Antonio :)
I really enjoy creating these videos .
Please do enjoy my friend .
Fly safe 🦅
Great video Eggro! - love the new studio!
Thanks Heli 😊 Hope that you are well , my friend .
How do you get control over the cockpit buttons and levers? Maybe with PointCTRL?
with a mouse or or bind left and right click to a couple HOTAS buttons, center the VR cursor... look and click
Thanks for all of your good advice.
I have one for you as well.
You can get yourself an aftermarket cable they are lots faster than the data cable that they sell. I just bought a cheap data cabel from my local store, I got 2.7gbs wit that.
Hello Ludos and welcome to Eggro.
Thank you for the kind words btw 😊
May I ask which brand cable that you bought ? I ask this, because it is a bit of a crab shoot ...on purchasing these link cables .
Where some cables produce better results that are available in the wild, but there is so little information regarding reviews .
Thanks again for the advice :
I am in the market for a link upgrade :)
Fly safe 🦅
Whats the point of having 2.7 gbs cable , if he did a limit of 600mbs bitrate in the MQ3 settings?
Good job, thank you. Be great if you could do one with after the next update since DCS (now unified, no more beta) is eliminating the separate MT exe.. All in all a lot of good stuff here, and I don't have an Q2 or G2 (Varjo).. also OXRTK is no longer supported and can cause issues..
Thank you so very much. My stuff is working like a greased
Pig!
how to enter in oculus debug tool? You should AMD also version of graphic setting
You were talking about upgrading beyond 32GB of ram. I have the 12700k with the 4090. I've seen DCS using over 34GBs during big battles on my PC with 64GBs.
Yes , I will be upgrading to either 64 or 128 Gb of D5 Ram because ...as you said , this Sim in a heavy MP or any mission with Multiple Assets demands more than 32 Gb ...which I believe to be the Bottleneck now in my system .
Other than that , my PC is easily up the challenge ... atleast for now 😀
I hope that you enjoyed the video , and thank you for the view and comment .
Fly safe 🦅
I upgraded from 32gb to 80gb and I saw a good improvement in stutters in MP.
Greetings EGGRO!
Fantastic video, which has helped me more than any video thus far! Would you be so kind as to instruct me how you get your VR hands to work in cockpit without the pointer? It appears you actually use your fingertips to adjust the mirror and some of the buttons and switches. Yes, I do have a high-fidelity airframe, the F-15E by RAZBAM. . . Thanks for any help.
Hello Aries :
Thank you for the feedback !
I'm happy that this guide worked well for you .
As for VR hands without the pointer ,
just apply the same settings as I did near the end of the video .
The reason that you don't see the pointer , is that I simply just pull the action trigger near the dials , although I could just as easily use the pointer at a distance.
Just point your Index finger , where you would like to interact with the A/C cockpit and press the action trigger .
I hope that helps .
Please enjoy , and fly safe 🦅
Awesome video. Does any of the core disabling apply to AMD processors? (9/2024)
HP G2 Why does Crazy settings Work? Set First Regedit Window to run with all cores unlocked, Set OpenXR Developers Toolkit for windows Mixed Reality Custom Render setting to 190% NEXT Inside OpenXR Toolkit Companion Set Turbo mode ON then Make sure Custom Resolution override is ON and set the 1st resolution to 4090 the second number will auto set so do not worry about it. NEXT Inside DCS turn DLSS on and set it as you wish BUT also try just using the others as a test also later. My GPU is a 4090 Aero and my CPU is a AMD 5800X3D and 64G of System Mem. I get the Sharpest VR settings in the HP G2 almost like it changes the headset into a new more powerful version. I have the Sharpest in the Cockpit settings this way and FPS in DCS 2.9 I have NOT capped my FPS yet but that is my next test to make.
Hey Bro. I have nearly the same Setup. 7950X3D is the differenz. I like Reverb G2 ver much. i have rendersettings in Open XR 150. So sharp and of course with Mods for the G2. I can not believe that Q3 works so good with same Picture Quality as G2. I can live with the FOV. Crystal is too big. Thats a stone. Yes the best Picture but with problems too. What should i buy? Nothing on the Market as Alternative with DP Port to Crystal.
@@michaelduernecker684 My Only VR headsets have been Oculus Rift S then the HP G2 so I honestly can not say. I have seen bad and good things about Crystal. I don't think I would buy one but What do I know.
Hi there GREAT VIDEO Thanks. Could you tell us where to get that nice overlay for the Reverb G2? Not Steam. I am using DCS stand alone version. thank you so much 😊
I need ADD to keep up with your ADD. But I think I got a few useful tips 😛👍
How are you getting that FPS counter on your screen?
Do you Will do a tutorial for Meta Quest pro?
I will eventually if I am able to get my hands on the MP3 :)
I would be more than happy to provide a settings guide for said HMD , although I opted for the MQ3 instead ...but these settings for the MQ3 in this video , should absolutely work with your HMD.
I think that if you give these settings a try , you'll be amazed how well this works .
If you have any questions while troubleshooting through this guide for your headset , please feel free to comment again .
I will be here to help .
Thanks again, and as always, fly safe 🦅
Quest Pro settings should be similar to Quest 3. Have both, but actually prefer the QP due to being able to peek at keyboard and with a modified head strap, it's more comfortable.
Hi great video really useful. Il be managed to setup my dcs except dlss that is still in grey and can’t use it why ? I’ve got an RTX 3090
Hey Team:)
Just run the MT version of the Sim, and your golden ✨️
@@eggrovr2733 thx !
Did you try using Virtual Desktop ?
@teamiconike168 Yep I've used VD for this Sim, yet I still find that Link (Cable) is the better option.
Hi bro, What video card do you use? Can I get to know your BUILD?
You haven't mentioned what Battery life you are getting from the Quest 3 running at 90fps I've found it will drop you to around 2 1/2 hours, which isn't acceptable. Locked to 72fps I can play indefinite
Hi Eggro VR
Another excellent tutorial. I am going to spend some time checking,/adjusting my settings. I have the HP Reverb G2 and a pretty much identical PC as you, as you know, so it should be easy to follow. I have a question about Process Lasso - when I run it do I need to be in a mission in DCS or just have DCS running? I tried it last night and with a mission running I ended up chasing the bars along until I got bored! I got up to processor 13, and if I disabled that, it just jumped to 14. I wound it back and disabled 1 - 8 as you did originally.
Regarding overclocking, I changed the settings on both my CPU and GPU having followed your tutorial some time ago. That was the tutorial where we changed the GPU fan settings to max them out. Is there a way of putting the CPU and GPU settings back to default. I believe we used EVGA Precision X1 for the GPU and MSI Afterburner for the CPU.
Again, nice work my man, and thanks again. BTW - my Bigscreen VR is on it's way 😁
Nial
Very nice on the Big Screen Beyond:)
I'm excited for you , my friend 😀
That HMD runs with the best VR HMD's today !
Regarding your CPU OC , the best way to set this back to default is from your Bios .
Just restart your PC , spam delete key , and click the f5 key to reset to default, then f10 save . After your PC restarts , you will have to adjust your XMP profile again and any other adjustment from your Bios that your comfortable with, for your configuration.
With regards to Process Lasso , I wound up chasing Cores 8-11, and then had to park Core 3 too lol 😆
Which in my case solved the issue , but I have read tons of posts regarding the MT tuning and it will be resolved in the near future .
Maybe try just parking Core 8 and see if that solves the issue with Micro Studders . I realize that your preference, like me , is to keep using Edge 2.9 with the features available , yet some report that rolling back and not using Open Beta , did resolve the issue ...which for me , I did try , and it does really work perfectly ...minus DLSS and the other features .
The GPU OC from X1 , should just reset back to default with each time you exit the app, but if you have set to permanent, just disable that and reset the app.
I would just use a custom fan profile, which will only ramp up during heavy sessions of Simming .
Please keep me posted , as to how the Beyond plays with this Sim .
I have only heard good things about that HMD !
Thank you so much for the view and the kind words , my friend .
Hopefully this helps you out !
Fly safe my man 🦅
Thanks for the video! did you ever tried wirless way to play oculus3? What do you prefer, VD or Airlink?
Definitely VD if and when I play wireless PCVR Sims . For me ,Virtual Desktop is the best option with the best streaming service and visual quality of the two!
@@eggrovr2733 actually i get better picture quality with VD wireless, than OqulusLink by cable. I have now idea how they did manage that magic 200mb bitrate win against 700-900 of Oculus cable.
Hi
I have a 4090 and in VR with open XR only about 12GB of Vram is being used. Any ideas?
Grazie ❤
You are very welcome 😀
Please enjoy !
What is the glove thing with a pointer that I am seeing?
Thank you for the video. A lot to digest. You refer to a 'cpu overlay' what do you use.?
Hello and welcome :
The Overlay that I use in the Sim is OXRTK ...but the Overlay that I always use , is MSI Afterburner ..so that I can keep an eye on GPU / CPU usage ect as well as Temps / Ram / Vram and power draw.
I hope that helps to answer your question .
Good luck
Fly safe 🦅
DCS vr for me is unusable as far as dogfighting is concerned. I can get the cockpit to look great, but anything beyond my wingtips is a blurry, shimmering, semi-transparent mess. I can't distinguish any aircraft type until they are very close, like 300 meters/yards away. At 3/4 of a mile (1.2km) an aircraft appears as a perfect little black square!? I can get 45-90 fps, 5-10ms frametimes, but nothing so far makes any difference to the quality of other aircraft appearance. I've spent more than 30 hours trying different settings and guides over the past 6 months.
I have : I9-11900k / 3080ti / 32mg 3600 ram / reverb G2 / 1tb ssd / open XR + toolkit
Does anyone have any advice ?
Thanks in advance.
Ward "Mooch" Carroll has a walk through of his VR settings, may be a good starting point. Cheers!!
@@ChristinanathanWesterfie-pr4jj Thank you! I will check it out.
@@bricktopperheadon5490 he has one vid that explains he prefers his track ir but he put out another that talks about how he was able to obtain his VR goals so don't get hung up if you see the 1st video bf viewing the more recent vid(s)
So is this a settings guide or a product review
@@eltontonge4186 Could be either 🙄 Pick you're poison !
Hy thank you for your tutorial. I'have a G2 for DCS and Q2 for the family. I'm wondering If I sell both and by a Q3. Q3 is better than G2 ? I have a RTX3070ti and I would like to upgrade. What do you think about RTX4070Ti 12Go is enough ?
Hello ,and thank you so much for the view and comment 😊
If you were to upgrade your GPU ,
I would consider the 4080 over the 4070ti just for that extra Vram and HP.
That said , I would keep an on sales for either of those GPU's and pull the trigger when you're ready.
With regards to the Q3 over the G2 , I wouldn't say that it's better than the G2 but an entirely different beast .
The G2 is far more comfortable / has a slightly higher resolution albeit ...a very small sweet spot / way better over ear speakers / is PCVR/ over compression (MQ3)
Yet the Q3 has edge to edge clarity / pancake lenses also if you don't mind compression, than the Q3 is a safe bet.
The motion reprojection/ASW.. is far better than that of any other HMD that I've tried , so far/WMR.
Also, please be aware that I've had 3 Q3's and all of which have had issues with either overheating and stuck pixels .
Honestly It's really hard to recommend the Q3 for now because of those issues .
If you do pull the trigger , and get a Q3 , please check for stuck / dead pixels because there are a lot in the wild as of now .
All that aside , the mixed reality feature is pretty cool and having that XR2 Gen 2 Chip with some new Q3 updated games on the horizon for me was a no brainer .
Ultimately , it's for your use case scenario...but in my, case the Q3 has been pretty awesome for DCS VR and every other PCVR and stand alone game so far!
Thanks again :
Please keep me posted as to your final choice and if you have any other questions , always feel free to comment .
I'll always do my best to help .
Good luck my friend :
Fly safe 🦅
@@eggrovr2733 thank you for your answer; I 'll try to find a 4080 but is very expensive regarding the 4070Ti.
The sweet spot of the G2 is the biggest problem of this Headset so perhaps I will switch. I let you knowe when I make my choise.
@@gab973 Hi I have a 4070 Ti as here in Australia at the time of purchase (About 6 months ago) the 4080 was way too much. I have DCS but not currently installed, however I play Balders Gate 3, Starfield and Red Dead Redemption all mainly on Ultra settings. I haven't as yet tried VR I'm still reviewing all I can for the Quest 3.
@@gab973 currently I would wait with your GPU purchase. nvidia will bring out the Super variants soon, so you would be able to buy 4070Super which will be around 4070Ti power for the price close to the 4070. The 4070Ti Super will do the same but close to performance of 4080. It will also shuffle the prices of remaining stock of non Super cards. nvidia is expected to do so around CES in January, so I would wait...
I also have a 4090 and my Quest 3 is coming. DO you recommend going for 90hz instead of the default 75? doesn't the quest lose resolution or something at that refresh rate? Thanks, I don't know if im confusing stuff but i'm running my RiftS at 45hz
Hello and welcome :)
My opinion is that 90 Hz is optimal , although yes I do agree that if you do lower your HMD to 72 Hz , you can bump up your graphics , yet with the OXRTK and the 4090 , I say why lower your Refresh Rate when a stable 90 fps is easily achieved with this guide .
All in all, try both and see which suits your needs better . I think that you will find that 90Hz just looks SO much better !
Good luck Alpen 😊
Please enjoy and fly safe 🦅
@@eggrovr2733 72hz just gives me a hedache. I know its just 18frames below 90 but i feel it and im not happy with that.
@vrbublik Yes sir :) I couldn't agree with you more .That is precisely why I always aim for 90 Hz / 90 FPS and up if possible .
I am also prone to head aches ,which is why in every video ... I share how to get 90 FPS and stable for most hardware .
Fly safe 🦅
With your visible range set all the way to low, which I think is horrible, this tremendously relieves load off the CPU GPU when playing dcs. I'd be curious to see your setting Max or just one step below. Where I currently have mine. It's nice to look out and not watch stuff being built in front of you as you're flying. I find that incredibly annoying. And mostly unrealistic.
Hello William,
I thought that I brought that up in this video . Well , either way , I do bump that up depending on the map or module that I fly .
Also, that statement is rather vague,
because there are so many variables with regards to setting adjustments for this Sim in VR and the effects on your Frametime and stability .
It seems that a lot of folks claim that they max their settings and still maintain stability 🤣 with no
proof to share with the community.
That said, I can easily max my settings with ASW locked @ 45 FPS,
and mostly maintain stability ....but motion reprojection comes at a cost .
Anyway , thanks for the comment and view .
Fly safe 🦅
I'm still figuring out whether I like the Q3 over the G2.
For the G2, I had 1.0 PD in the OXR Tools, and a 1.1-1.2 in the DCS PD. This gave me a very clear and crisp setting. (This was even with DLSS on)
For the Q3, to even get close to the same clarity in the center, I had to set my PD (in ODT) to 1.4 and my DCS PD to 1.3, and it was still a little blurry
No clue what I was doing wrong.
A secondary question, do you know if the "Pixels Per Display..." value stacks with the "Graphics Preferences" resolution (ex. 1.0-1.5) in the Oculus program, or does it override the other?
Hello :
Welcome to Eggro VR .
At first , I was on the fence also ..whether to even buy the Q3 .
Now that I have, and have tested between the G2 and Q3 ...honestly I would not go back to Fresnel Lenses and the small sweet spot on the G2 , but with regards to the clarity and lack of compression on the G2 / DP cable ...it's a hard sell .
I for one , really enjoy the Q3 / edge to edge clarity ( pancake lenses ) yet even still the G2 at the center focal point has it beat , and being solely a PCVR HMD wins in that aspect too...without the need to stop for a recharge 😅
Regarding PD on two different apps 🤔 Honestly just set one or the other .
I have to ask what is your Render Scale @ in OXRTK set to , for the Q3 ?
Maybe , try to bump that up if you have the headroom to do so , which will yield better visuals in your Q3 .
Thank again for the visit and comment .
Please enjoy :
Fly safe my friend 🦅
So when I drop my resolution to the lowest, my vr video dissappers. I have full screen enabled. Anyone know a work around?
what is the alternative of Nvidia Control Panel for AMD?
AMD Radeon settings is what you are looking for .
www.amd.com/en/support/kb/faq/rs-install
@@eggrovr2733 Thanks for the quick reply!
Hello! May I ask what model your graphics card is?
My GPU is the MSI GamingX Trio 4090.
Ey Egg, as per usual this helped me a lot again. Running over Dubai low level with solid 45 fps and crisp graphics. Cheers.
Question though: afterburner tells me im gpu bottlenecked (rtx3080) running at 98% most of the time. My cpu (ryzen 5 7600x, with 64gb ddr5 at 4800) runs at around 50%.
Thing is… should I invest in a new gpu (4080 or something like that?!) or would a different vr headset (currently a Reverb G2) be a better investment?
Hey Bjorn and Happy Holidays🎉
I'm very happy that this guide was able to help you to achieve stability.
Regarding your GPU (3080)
is still a Very good GPU btw,
and I would consider an upgrade soon , yet the 50 series is not terribly too far off and with that said , the 40 series will drop in price by then , to which I would pull the trigger on either 50 series or an RTX 4090 , just for that extra VRam.
It's hard to recommend an HMD ATM over the G2 because the G2 is still very relevant .
The MQ3 has been awesome for my use case scenario, and for DCS it's an upgrade over the G2 although most folks would disagree because of the compression 😮
That said the MQ3 with the settings provided in the video ...absolutely blew me
away.
Please enjoy the holidays and as always :
Fly safe 🦅
@@eggrovr2733solid advice buddy. Ill hold out a bit and start looking into them gpu’s in a bit.
Also saw the MQ3 and it’s on my list along with a Pimax Crystal.
Guess both would benefit more from a better gpu.
All the best for the new year and as always:
Party safe 🎉 😊
Dame you went thru this so fast . I didnt get half of it.
😄
I have a quest pro and any bitrate over 650 i get audio stutter using official meta cable. Similar system 13900k and 4090 but im seeing a lot of intermittent stutter while flying in multithreaded version of dcs..doesnt happen in single threaded and i also tried unparking all my cores, shutting down efficiency cores, etc.. still stutters and eventually it becomes really bad after soemtime as if dcs has a memory leak.
Hello :
Welcome to Eggro VR .
That's funny that you bring that up , as I experience the same issue with audio studder with anything over 600 bitrate.
I have tried different ways to adjust for the intermittent studder on DCS MT version 2.9 , with even going back to ST version of this Sim / disabling HT in bios ect and of course core parking using Process Lasso , which in my case provided the best results without having to roll back .
Please enjoy :
Fly safe my friend 🦅
@@eggrovr2733 Thanks about processor lasso. I downloaded it and noticed in VR same as you CPU 8 was at 100%, parking it then resulted in CPU 9 was at 100%..each time I parked one of these it went all the way up to CPU #11. After all these were parked, then I saw one of the random e cores was at 100%..not sure what it means but it looks like DCS MT version is not sharing proper load for me and my 13900k. Always at least one core at 100% and others just not doing much. In VR I'm seeing only about 5% CPU usage.
@salimelayan6290 Hey Salim :)
It definitely is an issue with Core usage , and as you saw in this video ...I experienced a very similar result , having to chase down cores to finally manage without studders .
It sounds like this issue for you isn't resolved by this method though . I would encourage you to roll back the update if your still experiencing micro studders . Which sort of blows 🤔 but I have tried the roll back and ...it does alleviate the issue at hand , without having to disable cores .
Atleast this way, you can still enjoy this Sim until this issue is resolved .
Please be safe and as always :
Fly safe 🦅
And What about Meta QuestPro?
I can't get it go go in vr mode on quest 3
It says must disable other controllers use hand controllers
Hello and welcome,
Firstly, launch DCS in 2D on your monitor and go to the settings icon.
From there, check ✔️ ✅️ the box that says launch in VR.
After that is done, follow the step in this video, particularly on the part where I enable my VR hands , and try to un-check your Virtual Hands.
Also...if you are launching via link/ PCVR, please be sure to use USB 3.1 port and a compatible cable.
Also, maybe unplug your HOTAS and try to launch DCS in VR again after those steps, just to try and troubleshoot the issue.
I would try disabling any Bluetooth devices that could be interfering with the Sim and launching in VR.
I really hope that this helps to alleviate the issue.
If not, please feel free to comment again and provide all of the steps that you have tried thus far.
Thanks for the view and comment,
Please enjoy and Fly Safe 🦅
willl this work on the Q2? :)
Hell yes , this works for the Q2 ( with headroom for adjustments ! ) 😀
This is all very confusing having just watched this and being shown that parking cores helps, I then watch reflected's video where he shows an app that unparks the cores to increase performance. 😅😅
Welcome to Eggro VR :
My apologies for any confusion regarding Core parking in this Sim .
Please enjoy and as always :
Fly safe 🦇
Hi. What is the spec of your machine?
Hello and welcome :)
My PC specs are :
MSI Gaming X Trio 4090
I9 13900k
32 Gb Corsair Dominator Platinum R5
3 Tb WD Black Sn 850 1Tb Adata external SSD
1000 W Corsair Rm 1000x
Asus Z690 Hero Maximus Mobo
Corsair H150i Elite Capellix
Corsair 5000x RGB Case
I have a i7 9700k with 2080 super and only 16 gig ram. I'm amazed I can actually run dcs smoothly locked at 45 in VR. How is it that a bunch of you with 4090's have stutters. That makes no sense at all
I don't understand the 90fps magic number fever, specially with a 4090 and a quest 3. With quest 3, with the incredibly smoth ASW you don't need 90fps to have a butter fluid experience. It's like missing the amazing experience you might have with ultra settings and the same fluid experience in the combo 4090/quest (3 or pro)
To each their own 😀
At least for ASW in this Sim, regardless of settings config, still not as good as native frames.
Thanks for video I got my 4090 and reverb g2 running butter smooth weird as I was lead to believe that if your headset was running 90hz you limit your frames to 45fps but not here 90fps is a lot smoother
Shame mfs2020 is not optimised like dcs
As I was seeing double vision with my other settings
Now I can feel like mavrick cutting the grass on the hills with my F18
Thanks
Create server on pc you run the game. CPU problems all go away as it forces dcs to use multiple cores. It will ease any cpu bottleneck almost completely.
P.Lasso can cause major issues with your pc semi-permanently so careful what you do in there guys.
Hi Sam,
Thanks for the view and comment.
Could you share your vast and extensive knowledge with the community as to how an application such as Process Lasso, that operates solely at the application level can cause permanent damage to a PC ?
Yes sir , by creating a server , could and most likely would allieviate the CPU bottleneck . That is something that I have not had the chance to navigate yet , but if there are alternatives ... I would love to investigate and share my results with the community .
Thanks for the visit 😀
Fly safe 🦅
I don’t agree about MSAA for DCS it induces a lot of flicker that breaks the immersion and in addition it requires a lot of ressources. TAA with a sharpening of 0.7 is MUCH better ……
HELP!!!!!!!
My G2 only runs at 60hz now.... I don't know what happened.... Been running at 90hz for 2 yrs and now only 60hz..... Anyone else having this problem?
Be aware...the Oculus quest app V63 and DCS are not compatible anymore...crashing on startup in VR. Read in DCS forum. I'm one of the affected. No solution yet. Is going to take some time.
Cable speed it Gigabits not Gigabytes, just as not to confuse anyone.
Welcome to Eggro VR 😀
My apologies for the confusion there .
Thanks again for your feedback .
Fly safe my friend 🦅
"below 4ms at the menu"
... im running 8.5ms at the menu....
:)
Qest 3 is trash hedset all ubrate about 700 pound all togeder wit strap and batery wat a joke only g2
I dont get the point for using VR. I did use VR with DCS and i dont want to low down my settings with my NASA PC. I did not invest thousand of dollars to play on low resolution. The other thing is, how many hours do you play DCS pro session? When i play Multiplayer as example, i need 2-3 hours at last. Now imagine to wear a VR Device 3 hours? I did so and my headache was like the worst i ever had, my eyes were red like devil and i always felt sick. After playing in VR i was not able to read text on my monitor. when you wear VR Device, those two monitors are 2-4 mm from your eyes, imagine you look on your pc monitor from 1 cm??
VR is nice, but it will damage your period if you use it regular. Go back to trackir and big monitor, thats it. You can enjoy DCS in Ultra Settings without issues. Why you guys stuck on VR? I tried it and i regret. Btw i believe VR is good for real pilots when they start training, then can use VR for 30 Minutes to train some skills or to learn the system. I saw many videos from real pilots using VR for training. After training they go fly in real, so there is no issue.
The vr shall damage your period???😂😂😂
@@eltontonge4186 i think i was high writing that 🤣🤣🤣🤣🤣🤣
Hi, is there any way to disconnect the Cursor from VR Head set. And only control it with the mouse? My cursor follows wherever i look and i have to be extremely precise.