Deltaforce Vortex 24 & 34 Comparison - Twin Motor Hydroplane V/s Single Motor Hydro
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- VORTEX HYDROPLANE HULLS (16, 24, 34")
www.offshoreel...
34 VORTEX PARTS LIST
CASTLE XLX2 HYDRA
www.avantlink....
LINKAGE ROD AND SWIVEL BALL END
www.offshoreel...
RECOMMEND RUDDER (current TFL rudder is to small)
Speedmaster 1" rudder assembly 1⅝" setback
www.offshoreel...
Leopard X2 4082 (1600kv)
www.offshoreel...
25kg DS servo
www.offshoreel...
40MM carbonfiber motor mount
www.offshoreel...
Speedmaster 21 strut HYDRO/SHORT
www.offshoreel...
.186 3/16 flexcable
www.offshoreel...
5mm to .187 coupler
www.offshoreel...
8mm SILICONE COOLING LINE
www.offshoreel...
LARGE WATER EXIT
www.offshoreel...
36" long 1/4" brass tube
www.offshoreel...
MEDIUM COWL LOCK (perfect for the vortex 34)
www.offshoreel...
Mad Lizard original turn fin
www.madlizardp...
Venom Carbon 6oz 2x2 twill Carbon Fiber & epoxy resin
www.ebay.com/i...
24 TWIN VORTEX PARTS LIST
HEAT SHRINK BUDDY
www.ebay.com/i...
LOC-TITE SILICONE
www.walmart.co...
LEOPARD 2850 X2
www.offshoreel...
4mm strut
www.ebay.com/i...
4mm flex cable
www.ebay.com/i...
TURN FIN IS FROM AQUA CRAFT UL-1
4mm to 4mm COUPLER
www.offshoreel...
6mm LARGE SILICONE TUBE
www.offshoreel...
SMALL WATER OUTLET
www.offshoreel...
70mm RUDDER
www.offshoreel...
OSE SERVOS
www.offshoreel...
VENOM CARBON KIT 12"X60" 12oz RESIN
www.ebay.com/i...
HATCH LOCK SMALL
www.offshoreel...
CARBON FIBER SHEET
www.offshoreel...
SADDLE TAPE 0.5" 12.5m WIDE
www.offshoreel...
OSE CONNECTORS & BULLETS www.offshoreel...
K&S BRASS TUBE
www.offshoreel...
FE RC BOAT COUPLER & COLLETS
www.offshoreel...
4016 prop
www.offshoreel...
4016 reverse prop
www.offshoreel...
3619 prop 4mm
www.offshoreel...
Thanks for Watching Ironclad Rc Tinker test and tune everything.
Personal contact information ironcladedout@gmail.comFacebook
www.facebook.c...
TikTok
www.tiktok.com...
Instagram
www.instagram....
Nice!! I enjoy hydroplanes
That 24 is dialed in!! Those are part of my favorite boats that I've seen in those sizes. I have wanted one for a bit and I will one day build a bad azz one too!! Great jpb!!
You're getting a smaller version very soon to start off 🤫 🤫 🤫 🤫 😂
That lil 24 is cookin!
Thanks for running my favorite hull design, big or small. Apparently, the speed record for an RC boat was set in Germany a few years back with a Hydro L8 speed boat that reached an incredible 206 mph.
Have seen the vid. Thought it would go through the soundbarrier !
@@sjorswouda6865 Most people here have already seen it some time ago i would imagine, especially for anyone who is even remotely into fast RC boats, just thought i would mention it considering that this speed for a toy boat is off the charts. Although these types of boats are hardly toys. Have a great night.
@@sjorswouda6865 🛥🔥🔥
@@sjorswouda6865 Compare that to a full size boat The Bluebird K7 jet boat at 250 mph, yes faster then the fastest RC boat but only 44 mph difference which is crazy
Building a 200+mph rc boat is on my bucket list of things to do!
Absolutely love these hydroplanes!!! And yes It really is a fun and rewarding hobby, especially if you plan and build (not necessarily from scratch) your own boat. Kits are great, but designing and crafting a hull, sticking in a 1-3/4 horsepower electric motor and sending it across the water at speeds faster literally faster than your average full size leisure boats is almost better than sex. 😬 almost…
I bet the boat last longer, LOL
I have attached a 1/10 car spoiler to the back. I have to say it drives really well! The hydro runs much more stable and the steering is super direct.
Greetings from Germany😁
Cha cha rippppper!
Sweet builds guy
Big B , great stuff . Both running and humming . Enjoyed the video .
I don't know the boat you might take turnfin off & run it, if you do it will end up on the beach & you also won't hit full speed . You need to be saved down in the corner. Good luck with run.
Remember, never back out of the throttle.
I agree, if or should I say when I remove the turn fin it will be at the speed run spot plenty of room out there
I would like to know what the angle of the flex shaft screw should be minimum or maximum I'm rebuilding my Udi rc with a 3860 1850kv and I don't have the space to make my bait run completely flush with the boat hull can you give me a good guideline on how to do this properly? Gr from Netherlands Pascal
Prop shaft should be Level 0° or .75° down, give or take
Your boats are flying
👍👍👍👍👍👍👍👍
My friend ran His Camry hybrid At 60 miles an hour Through deep water and hydrolocked Does that count Let's go!!!! 1 fast short pass..
Awesome stuff. I have the BlackJack 42, my only boat for now. What prop would you recommend for just a little more speed?
Abc 1816 17/45 one of my go to's
@@IRONCLADRC Thank you. Everything I have learned about RC boats is all from you.
I got a similar hydro like your white one , no turn fin on 46 its off its dial on 6s it wants to fly
Oh single motor
What’s the best and fastest ready to run boat
Either the zonda or the animal twin cat. Oxidigger is another fast one.
nude question does your shrimp boat shaft opset to right? tnaks big b
Yes sir
@@IRONCLADRC thanks im gonna do it coz im scrathbuilding a shrimp rigger ang im on the step of installing the stuffing tube thats a lot
100th like lol
I got an American made fiberglass hull mini hydroplane for your channel.. Contact me
Will do thanks
Yessir, both of them running right on the ragged edge! BG4L 🚤💨