DSG7 P17BF Repair Guide - DSG7 P17BF - How to repair DSG7 DQ200
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Repair guide for the DSG7 with the P17BF Error. This repair is simple but takes quite some time.
Can be done with simple tools and basic mechanics knowledge.
The spare part is available to buy on eBay and it costs around 60$.
If you need any DSG files or really need my help you can get my contact details here : www.evosoft.dk/... - ยานยนต์และพาหนะ
Great work, you inspired me, so i changed myself the valve block this evening. Mine had a little crack, not visible with the naked eye, but lost pressure ( it rose till 13 bar only ). All good. PS: at the end i primed all the actuators by puling/pushing them a few times( all 6 actuators).
Felicitari pt reusita !
GigiBelea aka JAX cum pot sa iau legătura cu Dvs?
Very clear explain you make it look so easy thanks for share .
Thanks! I actually think I could manage that if I ever need to on my DQ200
very detailed repair with proper instructions !
Frumoasă lucrarea
Very detailed information as always, thank you!
Thank you so much for your instructions and golden information.
Thanks ! Very good video which helped me to resolve my p17bf code !
How did u get the mechatronic decompressed en after change how did u get it back compressed?
Have you tried the Kinergo accumulator upgrade kit? Saves all the dismantling that you had to do here, and doesn't cost much more.
Yes, tested the Kinergo and it is a good solution but it involves the same amount of dismantling + drilling some holes and if you are not SPOT on with drilling then you have a repair kit that is useless after (when using old Kinergo solution) . Just saw their new kit now , when you mentioned it :) even if I am on their newsletter they did not announced the new type of kit. Old one was a pain in the a$$ :) The new Kinergo Kit is also 3 x more expensive than the accumulator housing.
thank you for detail video..thank you very much
Professional job, will explained.
Hello Gigi,
Thanx a million for the video...!!
I have a DQ200 on VW polo.
Issue is flashing PRND error received via VCDS was P17BF & P189C.
The Vehicle runs fine as in shifting etc....
I removed the Mechatronic and followed your video 100%
I did not find any crack on the valve body .... any idea ?
excellent work, many thanks for your video.
Very good and informative video....much thanks....Would you say that most of the replacement accumulator housings available are produced in China?? if so is there anything to be careful of when purchasing one via ebay...
ALL spare parts are produced in the same factory I believe ... but there are 1000 sellers of the same product. I would say you are safe to buy from any of them.
Nice, educational videos
awesome video. thank you
Salut Gigi, am un golf 6 1.6tdi dsg 7 trepte si am eroare P073B unable to engage gear 6 si P073A unable to engage gear 5, ar fi aceeasi problema??
unde trebuie sa caut prima oara problema ?? in cutie sau in mechatronic?
Do you need to calibrate the mechatronic when you install it again?
Thanks sir for explanation
Great video
Hi Gigi! So, you recomand that on mechatronic part should be filled with 1 l of pentosin chf 11s.but on the other part of the gearbox(mechanically) some video sugest for mentainance purpose 2l of oem vw g 052 512 a2 oil, which i know is full shyntetic . Do you recomand ravenol mtf-3 75w wich comes over the same oem nr g 052 512 a2? Or, which oil wins here?
My vaccum accumulator has lost the nitrogen gas inside it when I opened it so please help me what I should do now
Thank you very much for this videos. your videos are so informative and very helpful. i am in the market for Vw automatic and while browsing the internet, a couple of people were (recommending) saying DSG dry clutch (is better) than dsg wet cltuch. if one is looking to buy a dsg, which one do you recommend. is the triptronic (torque converters) found in polo vivo also bad. i will also visit your website to learn more. Thanks a lot for sharing the skills.
Whatever you buy , do NOT buy a DSG7 with Dry clutch , this DQ200 found on smaller VAG engines (1.4 , 1.6 ).
Fantastic video
Thank you for very informative video. I've subscribed your channel and taped the bell icon to follow all your future videos. And thumbs up of course..
Just a quick question, error codes P189C and P0841, is it the same repair as this video?
Just got told its valve body issue (pressure leaking) but I'm not sure about that. Hope you know and can help.
Hello, Gigi! I have a vw passat b7 model 2012, I experienced p17 bf, I bought the hydraulic plate from china, I followed steps from your tutorial, I adapted with a universal tester clone delphi ds 150e, it worked perfectly 2 days and about 50km, it started to jerk when changing lever shifter from parking in reverse and from neutral in drive, I also noticed at stops when a slight jerk appears d1 on the display but not at all stops, what do you advise me to do or fix? (The mechatronic came off the box a bit hard, but it was easy to mount, it lost about 2
-300ml oil in a 75w brown box that I didn't put back, I recovered 1 liter from mechatronics, but I got 1 l of new green oil vw)
Grait video. Thanks
Great work sir,I have vw golf 7 tsi bluemotion with dsg 7 speed gearbox,its writing this faulty control module performance implausible faulty code p060700 what could be the problem
Would the transmission code of P 0746 cause the transmission to malfunction?
hello, Nice video. I wonder if you could tell if the fault code 005981 - Clutch 1 opens unwanted , has something to do with a broken mecatronics?
I have the exact same problem with my Mk6 golf I want to know if it's the mechatronic unit or gear?
@@akeelmukhtar1808 hello ,my fault was the electronics part in the mecatronic. They changed the mecatronic part and the insurance take the cost. regards trond
I have a question. How can i reduce pressure in the accumulator? Is there any chance while unscrewing to explore?
Pressure in the accumulator can be reduced by software only.
GigiBelea aka JAX maybe you didn’t understand my question..accumulator is a hardware part with compressed Nitrogen in it about 50 bar right?. What you say I think is the working pressure
GigiBelea aka JAX how could we reduce pressure to safely unscrew it for replacement is my question, not pressure that is build when it is working :)
@@AndreasGiannakakis Has your accumulator CRACKED or why are you afraid of pressure ? If the Accumulator itself is cracked then the pressure would have been long gone trough the pressure relief valve.
GigiBelea aka JAX no I have the p17bf error and I ordered the Kinergo repair kit to replace the accumulator..the question is for safety purpose...the accumulator isn’t blown..I only have this error of leaking pressure and hydraulic oil spilled out of the breather
Hi mate p17bf-001 valve 3 what suppose to be??and play protection also..can u help..swap already with kinergo..
Thank u for your videos
It's helpful
P0841 - will this help in this error code?? Thanks.
Thank u sir
I have vw polo with dsg dq200 7 speed gear. mechatronic serial number 0am 300 053 F.
Is that compatible with repairkit on the market 0am 325 066???
Do you know the location of the G510 sensor in the DQ200 tcu?
we have oil leak problem from the breathing hole. When we stop engine some green oils get out from breathing hole
Can you help us What do you recommend to solve this problem? we have no problem for gear shifting
Repair the accumulator with the kit from Kinergo. Known problem when oil accumulator is starting to crack.
Hello. I have checked in the diagnosis my car (Polo DSG7) delivering the same error code P17BF, but Volkswagen says its not the acumulator but the hydraulic pump. They ask me to change the whole mechatronic but i guess its possible to change only the pump. Can you help me? Thanks in advance
VW will tell you anything to take your money :) Of course is possible only to change the pump. Just buy a defective unit and swap the pump if you think is only pump, but my money is on the accumulator.
Salut Gigi ce părere ai despre Kinergo chit?
Thanks. I open one today. I can’t not find any thing damage 😞 I was put oil after 10 mint leak out. Can u help me. ?
On some units that are just starting to crack you can not see it, it is very very thin the crack.
screws are at least 28 NM force, but mine was already open at service and i think they over force all screws, 3 of them come out very hard and 2 where already unscrew 2 - 3 cm outside it's house.
What is the correct torque spec for the inside screws
20-28nm,
I don't have branch for small NM, I have from 28nm to 250nm.
Buna ziua! Am si eu DSG 7 trepte pe un Audi A3 1.4 TFSI. Cand e aglomerat in oras si merg bara la bara masina incepe sa tremure la plecare (asta dupa frana-acceleratie-frana-acceleratie si tot asa). De exemplu cand plec de la semafor iarasi tremura la plecare dar dupa nu mai am nicio problema. Am vorbit cu altii si au zis ca trebuie schimbat uleiul in cutie neaparat, desi in cartea masinii scrie ca nu se schimba niciodata la modelul cu 7 trepte. Bun, am zis sa ma interesez ca sa schimb uleiul. Cativa mecanici erau pe aproape sa-mi si comande vreo 7-8 litri precum cred ei ca la DSG se schimba, insa, dupa un mic search pe internet am aflat ca la cutia mea incap doar 1.7 litri de ulei si acela este de cutie manuala, nicidecum de cutie automata, pentru ca e cutia cu ambreiajele uscate. Si acum vine intrebarea mea: daca incerc totusi sa schimb uleiul (cei 1.7 litri) sunt sanse sa scap de tremurat la plecare dupa ce cutia se incinge? Repet, cand nu e trafic si nu trebuie sa opresc masina de 1000 de ori si sa plec iarasi nu am nicio problema, cutia merge perfect. As fi foarte recunoscator sa imi spuneti si mie o parere. Multumesc!!
Very insightful! Would you recommend the dq200 in 2021?Do you know if vw has fixed the problems you are describing? If someone plans to keep a vw car polo for instance with dq200 gearbox for more than ten years would you recommend it? Any piece of advice would be appreciated.
No, I would not recommend DQ200 , sorry. VAG has reworked the valve body but we have seen even newer 0CW units blowing :( .... so still not recommended. Buy new with extended warranty and then sell before goes out of warranty.
@@GigiBeleaDK thank you for your advice once again. Much appreciated
When reassembling this unit, what is the recommended torque setting for accumulator housing screws and solenoids valves...?
I could not find any torque specs for this anywhere, so use your common sense and feel. When unbolting it , you should kinda feel the force needed.
Unscrew with nm screw and see aproximative when will unscrew... I will try in a few days. Trebuie desfăcut din încercări cu Chei manometru a... Parca asa se nuneste
Nice job!Can you tell me what kind of oil goes into the mechatronic part and how to fill it?Because some say that is impossible to replenish mechatronic part with oil.
Pentosin chf oil, 1L. You have a drain screw under the mechatronic and you can fill from the breather hole on the top.
@@GigiBeleaDK Thank you!
Look at G 004 000 M2
How can I relieve the pressure of the Accumulator before removal?
i also want to know this
Hello Sir
How you removed the pressure from the accumulator? I will try this repair by myself.
Thank you four your reading my question
Best regards
Marco
Hi does anyone know the cause for dtc P073F00 , P074B00 unable to select gear1, gear 2 and P278400 input turbo speed sensor A/B correlation. Is this a mechatronic fault or tcm. Thanks
Did it perform basic settings properly ? Problem could be a bent shift fork inside the gearbox.
@GigiBeleaDK Hi Gigi, no, this is the fault with this car breakdowns with this dtc, reset codes restart and car will drive gain. Thanks
@@barry1-m1d now what ? :) make basic settings , IF POSSIBLE ... but as I said , might be a bent fork inside the gearbox.
Eu conserto qual quer mecatrônica dsg
Please, i am so far, so can i have your contact please. I want to talk with some one for my problem with my dsg 7 with scirocco tsi
My contact details are in the video description.
TH-cam in sedat nezir
Salut poti sa ami dai nr tau sau Facebook ul te rog am nevoie de tine
ai probleme cu dsg-ul ?
Trond B
Hello. I have a problem with my dq200 in that the clutch is always engaged it seems. So I can’t start the even if I put it in neutral or park. I can start the car with the wheels off of the ground but even in neutral the wheels turn. I did have low pressure fault code but that seems to have gone away with a top up. Does this sound like mechatronics failure or something else?
Yes, seems to be mechatronic and the car is blocked in 1st gear maybe ? Or maybe your forks inside the gearbox are bent. Can not diagnose this from distance.
GigiBelea aka JAX thank you for your reply. Is there any way to diagnose between mechatronics failure or bent forks? Are there different symptoms? Codes are Unable to Engage Gear 1 -or- Synchronization Gear 1 aborted
Unable to Engage Gear 3 -or- Synchronization Gear 3 aborted
P189C/006300 - Function Restriction Due To Insufficient Pressure Build-up. (it seemed that topping up the oil fixed this code)
@@thefitchesvideo Forks you can only check if you open up the gearbox.
@@GigiBeleaDK Please can see video th-cam.com/video/uobnMaNGBvE/w-d-xo.html did not see a cracked housing. Can you recommend how we can check mechatronic unit? Would you recommend taking it apart and testing all solenoids ?