Setting up portable washer Black And Decker 0.90 cu feet
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- On Amazon BLACK+DECKER BPWM09W Portable Washer amzn.to/3YHiaM6
In this video, we're going to show you how to set up your Black & Decker BPWM09W portable washer. This washer is perfect for small spaces, and it can easily fit in your kitchen or bedroom.
If you're looking for a way to clean your clothes quickly and easily, then this washer is a great option for you! We'll show you step-by-step how to set it up and get it working, so you can start cleaning your clothes right away!
Black and Decker portable washer
This is a Black and Decker BPWM09W washing machine or a Black + Decker portable washer. Model BPWM09W 0.9 cu. feet.
#blackanddecker #portablewashingmachine #miniwashingmachine
How do you set up a portable washer?
BLACK+DECKER BPWM09W Portable Washer amzn.to/3YHiaM6
14 Pieces Faucet Adapter Kit Kitchen Aerator Adapter Female To Male
amzn.to/3WETQHT
7 Piece Faucet Adapters
amzn.to/3Mmfdcx
amzn.to/3YHiaM6 On Amazon Portable Washer amzn.to/3YHiaM6
7 Piece Faucet Adapters amzn.to/3Mmfdcx
14 Pieces Faucet Adapter Kit Kitchen Aerator Adapter Female To Male
amzn.to/3WETQHT
XPG 2TB GAMMIX S70 Blade amzn.to/4fReSfo
Playstation 5 Disc Version PS5 Console amzn.to/3WYBL8Z
PlayStation®5 console (slim) amzn.to/3M1n1Qz
DASHCAMM FOR UBER amzn.to/46YnIUF
Kingslim H02 Dash Cam Hardwire Kit amzn.to/3M29pof
Kingslim D6 Dash Cam Rear Camera amzn.to/3Al9ukg
SAMSUNG EVO Micro SD-CARD 256GB amzn.to/4ch8L0Q
#ipostwhatever
Super helpful! Thank you. I haven’t used mine yet and I’m nervous. Many videos don’t show how it is hooked up, so I appreciate the detailed walk through.
You are so welcome!
i wonder why you can't use hot water
Use warm water
It will accelerate the wear and tear of the machine. It is cheap plastic. But you can use WARM WATER. Leave thr cold and hot water on at the same time. Ive been using it like thar for over a hear with no problem
Update 2023, video coming soon, 2 YEARS LATER. Is the machine still working?
Update March 22-2022. It is still working strong, I use HEAVY MODE because it uses more water and wash more clothes. LEAVE THE WATER ON/ RUNNING DURING THE WHOLE WASHING PROCESS, THIS WAY, IT WILL FILL UP, DRAIN AND REFILL AUTOMATICALLY. 41 Minutes is good enough for me to watch and episode of Netflix Series lol. I have a Queen size bed, and my FITTED AND FLAT SHEET fit perfectly together in the washer. When I wash my "BED COVER/STAIN PROTECTOR", I DONT ADD ANYTHING ELSE BECAUSE IT TAKES MORE SPACE than a flat and fitted sheet. AND FOR GOD SAKE, DO NOT WASH BIG BLANKETS OR COMFORTER. I also have a indoor PANDA portable dryer that don't need to put the hose on the windows. I'll probably make or record a video about it. it does take 1 hour and a half to dry clothes.
Just answered my question!!! Thank you!! None of these videos tell you if you need to leave the tap running for the full cycle or not! And/or should it be a heavy water run on the tap or medium or what…
@@suda_lovesame question
Can you help me understand how to get the bottom plastic cover installed...i feel super dumb im not even to step one 😟
This is what I came here for. Lol
I feel bad i never saw this comment lol. I know you already probably did it, but its never too late to help someone else. IT IS EASY, hou just need to slide it in little by little using both hands. Sorry it was hard to record it without help lol.
Update September 06-2024 The Washing machine still working strong. On Amazon Portable Washer amzn.to/3YHiaM6 . I have been using WARM WATER for over a year now. I open the cold and hot valve to create warm water. Clothes come out cleaner than ever now. Every washing mode is preset but you can customize them, like if it says 41 min total, you can reduce de number of loads, cycles and for how long you want it to spin. If the washer ever stop, does not want to spin and it is full of water or if the water is constantly running through the draining hose, washer not retaining the water, then TURN IT OFF, UNPLUG IT AND DRAIN IT MANUALLY BY OPENING THE BACK BOTTOM CAP. Once it is drained replace/close back bottom cap, plug the the washer back in, turn it on, set it on NORMAL MODE or RAPID MODE to test it. If it still not retaining the water, repeat the process and it should be working fine the second tiem.
I will use cold water with black and Decker portable Washing machine
Good presentation ❤
Thank you 🙂
good setup, I used a quick disconnect for the washer inlet as well, and I use warm water mix.. no problems.
Great video. Very informative. Thank you.
You’re welcome
This help me so much I literally just hooked mine up and I am enjoying it so far but it’s been 1 hour. Great investment.
Thanks for your video. 🙂 It was a welcome addition to the manual which said nothing about when to turn on the water.
Lol welcome 🙏🏽
When the washer stops the water from going in, the water comes up and leaks through the faucent adapter? what's the solution
Thank you so much!!! Very clear easy to follow instructions!!
So do you leave water turned on the whole time or do you cut it off in between? Also can you use tide pods?
Yes, i leave it on during the whole washing process, This way it would reload water automatically. I only turn it off, when I am done washing. I have not use Tide pods yet, so I am not sure, but I'll give it a try. I only use normal liquid detergent and then a softener in the last round.
Hey, I just bought this washer. After using it a couple of times I noticed the washer does stop its washing cycle for about 2 mins and then continue to wash and then spin cycle starts. Not sure if this happens to yours.
Thanks for the information I’m getting my washer delivered tomorrow (:
Im glad it worked out good
Thank you so much. I figured out how to use my machine because of your video.
Glad I could help! ☺️😊
Once the washer gets full do u turn the water off until the next cycle
No, i leave it on during the whole washing process, this way you can leave the machine doing its thing automatically. IT WILL FILL, DRAIN AND REFILL AUTOMATICALLY. I use softerner in the last round or the las 10 minutes remaining. I have been using HEAVY MODE lately because it use more water and i can wash more clothes.
I also wonder why no hot water?
This is what the Manual says : " Under certain conditions, hydrogen gas may be produced in a hot water system
that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water system has not been used for 2 weeks or more, before using a
washer or combination washer-dryer, turn on all hot water faucets and let the
water flow from each for several minutes. This will release any accumulated
hydrogen gas. As the gas is flammable, do not smoke or use an open flame
during this time." IT SOUNDS TO ME THAT YOU CAN USE IT AS LONG AS YOU CAN OPEN THE VALVE FOR A MINUTE BASED ON WHAT THE MANUAL SAYS. BUT I HAVE USED HOT WATER COMBINED WITH COLD WATER SO I CAN GET WARM WATER. AND THE WASHER IS STILL WORKING. I LOST THE QUICK CONNECT BY THE WAY, IM LOOKING FOR A REPLACEMENT CAUSE IDK WHERE I PUT IT.
@@iPostWhatever Thank you. A portable washer will nip my masochistic tendencies in the bud.
Whenever I set mine to heavy load, it's preset to 63 mins. How is everyone's heavy loaf set to 41 mins?
That is so weird, it's probably a factory error with the programming. Mine says 41 Minutes.
You can use warm water by adjust the taps.
Yes. WARM not HOT. Open both valve.
My mom and I was working on a new Black + Decker portable washing machine. Your video helped us. Thank you so much!
You’re welcome ☺️
Well done video, thank you.
Welcome, im glad I helped
My faucet connection only screws in without the rubber washer. I’ll have too see how an adaptor works, if it works.
That’s weird. Maybe the washer is thick, if that is the case, try a thinner one. Without it, it will leak.
@@iPostWhatever I put a thinner one that resolved some leak I tightened all joints again also. However I still had an under sink leak while washing (for the first time) that got onto the floor. Not a heavy one-about 1-2 glasses of water size. My solution that stopped the leak is that I can’t keep the water faucet on for the whole time. I have to shut it off after it fills for wash and after it fills for rinse. These are old pipes/old plumbing in buildings. Plumber might be needed eventually (this building has always had water damage issues). Washer works great though for first time.
Used it for the first time today and now it won’t work. It spun and had extra rinse on and stopped on the second rinse. Blinking rinse and now it’s just humming and won’t start anything. Read through manual. Don’t know what to do.
IF IT HAS WATER STILL IN IT, UNPLUG THE WASHER FROM THE OUTLET, DISCONECT THE FILLING HOSE, DRAIN THE WASHER BY OPENING THE BOTTOM REAR CAP. RECONECT THE FILLING HOSE/TOP HOSE, PLUG IT IN AGAIN. OPEN THE WATER VALVE, TURN IT ON AGAIN, SELECT NORMAL MODE, SELECT START TO TEST IT.
@@iPostWhatever I ended up returning it because I did all trouble shooting and called manufacturer and they said it was defective
Do you keep the water on the entire time? At what point do you turn the water off?
Yes, i keep it on the entire time. I only turn the water off when im done doing laundry.
Are u supposed to leave the faucet run the whole time ?
no one answers this fucken question. All the dumb videos everyones to busy being a utuber.
Yes
Thanks for this review.. just purchased one and was looking for something quiet and small 👍🏽
Im glad it helped ☺️
That was a well done great video thank you for posting it it helped me immensely
You’re welcome 😎
Do i keep the tap running for the full cycle? Or do i turn it off when the machine is filled with water????
LEAVE IT ON, DURING THE ENTIRE PROCESS. YES LEAVE IT RUNNING FOR THE FULL CYCLE. THIS WAY THE MACHINE WILL USE THE WATER TO FILL UP AGAIN AUTOMATICALLY.
@@iPostWhatever Thank youuuuuuuuuuuuuuuuu
Does anyone know where to get a replacement belt for this unit
Good question, I've been having the hardest time finding the exact same belt the machine comes with
This is Fez! 😂
This was super helpful!
Glad it was helpful!. very nice machine for any apartment.
Lifesaver. Easy to follow. Thanks so much?
Thank you! this was very helpful!
Thanks for this.
Welcome 🙏🏽
Mine won’t stop leaking
If it came defective from factory it will be better to return it
This video is soooo helpful
Thank you! I just ordered my black and decker washer!
You can leave the hose hanging on the side of the washer with the remaining part of the hose pointing to the sink, toilet, or anywhere you can drain the water.
Why cant you put the draining hose in the tub to drain the water?
Has to be higher than the machine water level too or any machine will leak
He is right. But you can leave the hose hanging on the side of the washer and the remaining part of the hose pointing towards anywhere you want the water to drain like toilet, sink etc.. but when you finish more water will remain inside the washer. You won’t see it, but it will be there. But if you are going to do laundry weekly, thar water will drain and free space for three new water lol. It is nkt a big deal.
Followed your video and your instructions was on point. Thank you. I am on my third load.👍💯🙏
Glad it helped
Wish I found this one couple yrs ago. Works great!
Enjoy! :)
pull the blue tap out in the drum and you can add detergent where the water fills
Thanks
Really thorough, thank you!
Thank you for your help!!!
Glad it helped!
Do you need all those things to make it work with a bathroom sink?
This has been so helpful! Thank you for sharing. Gonna pull out my pliers tomorrow 👌🏽👌🏽
Welcome 🙏🏽
Thanks 🙏🏽
I needed to know how to clean the filter and you showed me. THANK YOU!
Happy to help!
It was leaking from the adapter to the faucet so i took out off. There was a metal wire coiled into the adapter and it was sticking out. So i pulled it all out. Now I think its broke . Do you know?
I have a question I have this washer but I have a square piece not sure where does it go
No body gives any real fuckin details
How did you remove the first part in the sink? are all sinks able to do that ?
this is super informative! i was wondering why you can't use hot water tho? the washer doesnt heat up the water at all right?
It’s plastic so hot isn’t recommended as it can damage the seams over time. Will void warranty
really wanted to see if a tid bit of water leaked from faucet
Mine have never leaked a single drop of water. This is why it is not recommended to use hot water, so you don't damage the washer.
You can use a few drops of dish soap.
Noooooo... it says in the manual DO NOT USE DISH SOAP EVER
U can use Disdetergent!
are u suppose to turn off the water?
No, do not turn off the water, you need to leave it running. The washer internal valve do the opening and closing automatically. Turn it off only when you are done with laundry.
my hose won’t properly screw onto the machine i turn on the faucet and it starts spraying water once it gets to the other end… anyone else have this problem?? the hose is super short so i’m thinking of getting a longer one but don’t know if a regular washing machine hose will fit
Same, did you find a solution?
@@miss.megalodon i ended up getting a new hose from home depot and that worked way better. also use plumber’s tape on the end
My apologies, never saw your comment but thanks for helping the guy 🙂
Dose the hose come with the adapter or separately
Hose come with the QuickConnect pieces, expecting to fir in your current faucet. If it doesn’t then you will need an adapter. Link in the description.
You need to get to the point and use more detail on how to remove the cap from sink in the first place