How to Replace Rear Wheel Bearing & Hub Assembly 2014-2022 Jeep Cherokee

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHF00559
This video shows you how to install a new wheel hub and bearing on your 2014-2022 Jeep Cherokee. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2014 Jeep Cherokee
2015 Jeep Cherokee
2016 Jeep Cherokee
2017 Jeep Cherokee
2018 Jeep Cherokee
2019 Jeep Cherokee
2020 Jeep Cherokee
2021 Jeep Cherokee
2022 Jeep Cherokee
Tools you will need:
• Pry Bar 1aau.to/oTS/1AXAA00020
• 10mm Socket 1aau.to/obbV/1AXAA00017
• 19mm Socket 1aau.to/oahr/1AXAA00043
• 36mm Socket 1aau.to/ob4/1AAST00006
• Brake Caliper Hanger 1aau.to/oiF/1AXAA00439
• Pliers
• E14 Socket
• T55 Torx Socket
• Torque Wrench 1aau.to/oaFj/1AXAA00044
• Anti-Seize Grease
• Gloves 1aau.to/o8W/1AXSS00048
• Safety Glasses 1aau.to/oZ6/1AXAA00343
• 5mm Hex Socket
• Floor Jack 1aau.to/o5N/1AXAA00068
• Hammer 1aau.to/oUg/1AXAA00091
• Punch
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@christianrayford5802]

Did you put the brake into service mode before doing all this?

[@kenisthistoo7499]

Great content! Love the videos 👍

[@jeremydohner346]

This is an amazing video as well as others. For the Axle Nut, do you know the thread pitch? i am seeing 2.0 and 1.5 as available thread pitches for the 36MM M24 Axle Nuts. Thanks!

[@MIKEWA81]

Seen in another video the fellow mentioned the brake caliper bolts are a one time use bolt is this true or not? Great video

[@travislatendresse4270]

I’m having trouble getting the socket on the hub bolts. The cv joint seems to be in the way. Any tips to deal with this? (Front)

[@tanneritechad]

What about FWD only?

[@atk1da]

I have a t55 socket
..to loose.