1994 Ford Bronco 5.8l Crank no start no spark FIXED!!!!!! Got it started

After a week long haul with trying to get it to start.
Finally figured it out.
Replaced
New cap new rotor.
Plugs and wires.
Cool pack.
And icm.
ICM Ignition Control module
Part number dy-1077
www.autozone.c...
Still hard start tweaked the Timing and boom it Started make sure you have spark if no spark inspection on cap and rotor in side if that’s good go test the coil if that’s good test the ICM if that’s good.
Then probably Timing needs to be set.
Make sure motor craft black dy-1077
Like I said 3 brand New 1s failed.
Thanks for watching Please subscribe for more videos

[@azwb]

Probably the cleanest engine bay ive seen.
Also, liked how you got 35gallons of gas in there and buried your fuel needle!

[@Saving_classics]

I detail all my cars to the max.
Especially the engine bays try make ‘em Like New. Carpets was of course after.

[@motorheadscottie456]

“Yeah guys i figured it out, first thing i did was replace everything and now my truck runs”

[@carlsaiyed1097]

Love that the video is 3:51

[@Nelval573]

3:52

[@user-ro3eo7zu7p]

Thanks for the video. It was very helpful and it solved the problem.

[@etheridge66]

My 1996 Bronco got stuck in low range after a lot of checking it was blowing fuse 18, Turns out the air bag module was bad. Unplug it and put a new fuse in and all the weird stuff stopped . bought a used airbag module

[@olysasquatch]

Neutral or Park to engage. There is a switch/relay? on the transfer case that can go bad. Had to replace mine.

[@brandonlong5276]

Transfer case shift motor will cause the 4x4 button to not work

[@terryjames7811]

You have to be in N to make the 4x4 work

[@brandonlong5276]

Nah, only to shift into 4LO

[@thomasdaniel5718]

What was the issue I got a 350 5.8 liter doing the same thing

[@Saving_classics]

What ever color your Ignition control module call Nearest Ford and order same color.
Do Not! Buy From auto parts stores there No Good.
And adjust your timing

[@thomasdaniel5718]

@@Saving_classics it ran great before my dad pulled the ignition switch popi it back together now it just rolls over no start

[@Saving_classics]

You would have to see if it is getting Fuel and spark.
And if Yes then Timing .
If no then it’s a electric issue with the switch

[@thomasdaniel5718]

I thought about running a wire to the coil and see if it starts

[@troyroe6021]

Dude u had no oil pressure?