Cheap Tire Changer 560 Mounting Machine Unboxing, Test, and Review

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ก.ค. 2018
  • This video is a review and test of a cheap Chinese tire changer. More information below!
    Please like and subscribe if this was helpful!
    Stuff from this video:
    Tire Changer and Balancer Combo: amzn.to/2LcfLUg
    Changing Machine: amzn.to/2NTHNT5
    Balancing Machine: amzn.to/2upcKWW
    Valve Stem Fishing Tool: amzn.to/2KZrw16
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 226

  • @VV-cw1fc
    @VV-cw1fc 4 ปีที่แล้ว +3

    👍 just got myself one and didnt feel like reading the instructions. Thanks for the video

  • @roymariano7116
    @roymariano7116 4 ปีที่แล้ว +3

    Now I know what I want for Christmas.

  • @Ortho281
    @Ortho281 4 ปีที่แล้ว +1

    Good review! Just purchased this same combo from eBay to mount and balance my race tires.

  • @rodneygowland551
    @rodneygowland551 5 ปีที่แล้ว +69

    It is a good idea to remove the wheel weights first.

    • @TimNummy
      @TimNummy  5 ปีที่แล้ว +2

      good thought.

    • @consaka1
      @consaka1 4 ปีที่แล้ว

      First thing I noticed. A wheel weight left on can really bugger up an aluminum rim and rip the plastic/teflon inserts out of the "foot".

    • @loganmann4792
      @loganmann4792 4 ปีที่แล้ว +3

      Also leave the spoon in the tire to ensure it doesn’t reseat on the rim done that to many time

    • @RomanicusMaximus
      @RomanicusMaximus 4 ปีที่แล้ว

      LOL

    • @LJT9393
      @LJT9393 2 ปีที่แล้ว +1

      And also tear the tire beads

  • @chuckanddebbiebehindthesce5757
    @chuckanddebbiebehindthesce5757 3 ปีที่แล้ว

    I like your trademark logo. I have been doing tires since 1983.

  • @fiddyb
    @fiddyb 5 ปีที่แล้ว +3

    Tim, I love the direction you are going, every episode has something interesting and wonderful to watch. I think you should do a vlog about yourself. Would be interesting to know where you come from and what else you do. keep it up.

  • @eriks836
    @eriks836 4 ปีที่แล้ว +1

    Great video! Thanks for sharing.

  • @x-man4702
    @x-man4702 5 ปีที่แล้ว +12

    The mounting machine (only) cost around $850, divided by $60 (average cost to get 4 tires mounted) is 14. Fourteen sets of tires and the machine is paid in full. Not bad if you have a lot of cars at home and you are machanically inclined. Thanks for the review!

    • @TimNummy
      @TimNummy  5 ปีที่แล้ว +2

      I think it paid for itself in about 6 months for me!

    • @sightingson18wheels
      @sightingson18wheels 5 ปีที่แล้ว

      After 10 plus years of changing tires by hand, it is well worth it.

    • @workingcountry1776
      @workingcountry1776 4 ปีที่แล้ว +1

      16 inch tires without tpms are $20+ each. $100 is more typical tire mounting price.

    • @Elaba_
      @Elaba_ ปีที่แล้ว

      Don’t forget depreciation and maintenance costs.

  • @todaywithbk
    @todaywithbk 2 ปีที่แล้ว

    Easy instructions, thank you!

  • @jkerns632
    @jkerns632 5 ปีที่แล้ว +11

    i have never seen a double bratwurst on one bun ... nice !

  • @redbaron2448
    @redbaron2448 5 ปีที่แล้ว +5

    Great review, What size rims/tires? 15" yes 18" 20" Rims?

  • @niceguy4928
    @niceguy4928 2 ปีที่แล้ว

    Awesome...Thanks for the video . I ordered these and they are sending to my local freight. I have a f250 Ford . Do you think both will fit in the bed to bring home . Thanks

  • @squid148
    @squid148 2 ปีที่แล้ว

    I highly recommend to use mustard on the hotdog 🌭! Lots of keyboard mechanics here. Good review and your shop is excellent!

  • @HalferLandPerformance
    @HalferLandPerformance 5 ปีที่แล้ว

    My exact rim (RPF1), needed one of these changer to get a 45 sidewall on, it was impossible with a manual changer!

  • @BidCrushr
    @BidCrushr 5 ปีที่แล้ว +2

    Dude that’s a great video review & an awesome double hotdog. I’m going to break mine in with a double dog also when it arrives.

    • @981porsche3
      @981porsche3 3 ปีที่แล้ว

      BidCrushr, maybe he won the double-dog dare 🤷🏻‍♂️

    • @crushrreviews
      @crushrreviews 3 ปีที่แล้ว

      981porsche 🤣🤣🤣

    • @michael931
      @michael931 3 ปีที่แล้ว

      Make sure to have 3 dogs barking also.

  • @Cheef2k
    @Cheef2k 3 ปีที่แล้ว +4

    I had to exit right after I saw the double glizzy Goliath🤣🤣

  • @medzakaria2820
    @medzakaria2820 3 ปีที่แล้ว +3

    Hi Sir.
    Can this machine be operational for professional purpose? Or it is unable to handle too much daily work.
    Thanks

  • @rickie5150
    @rickie5150 3 ปีที่แล้ว

    That was a good video !!! I think I'm gonna get me one of those !!!

  • @guardian-tacticalsecurity-1490
    @guardian-tacticalsecurity-1490 6 หลายเดือนก่อน

    Could this be used for motorcycle tires or strictly cars and trucks

  • @geirmyklebust
    @geirmyklebust 4 ปีที่แล้ว

    I got one, pretty old, not bad, outside in my carport. Works great, paid about 130 bucks.

  • @singtracks
    @singtracks 4 ปีที่แล้ว

    For the money and us occasionall users this looks like the mutts nuts,,and great down to earth video

  • @maximolotov
    @maximolotov ปีที่แล้ว

    Do you think 12 gallons tank can inflate flat 21 inch tire and get it on the rim after tire change ?
    If i just prefill air tank with any compressor and run cheapest tire changer machine from 8 bar air tank

  • @seasstang
    @seasstang 8 หลายเดือนก่อน

    Doses the machine have air constantly being released. My machine has a Valve you can hear constantly air being released from.

  • @dfeller7
    @dfeller7 2 ปีที่แล้ว

    Gotta love the random hot dog

  • @richardcloudbase
    @richardcloudbase ปีที่แล้ว

    Gr8 video. I loved the balancer vid as well. I have a tire machine and a big old balancer. I don't have space for the balancer so was toying about a cheepy one that takes up less space. We can get these cheap ones in the UK. They seem to work ok. One thing I would say, is be careful about spraying soapy water inside the wheel. It will be there for ever and corrode your rim by the time you need a new tire.

  • @LetricShave
    @LetricShave 3 ปีที่แล้ว +5

    Thank you for mentioning the yellow dot needing to align with the valve stem. I saw a red dot on that tire as well. I know that the color of each has a specific meaning and purpose. I think all tire installers that don’t take the time to align the painted dots with the valve stems should be given time off without pay. I’ve often wondered if the hideous cluster of weights on a lot of my wheels would have been necessary if the installer had taken 15 seconds to align the dot with the valve stem. Congrats on the purchase of your tire installer. It’s awesome when you can do something yourself and don’t have to worry about some careless dufus boogering up your stuff.

    • @TheBraulio459
      @TheBraulio459 2 ปีที่แล้ว

      It's supposed to be aligned the the red dot

    • @TimNummy
      @TimNummy  2 ปีที่แล้ว +1

      @@TheBraulio459 the red dot gets aligned with the balance mark on the wheel, should it exists.. and should be used in priority over the yellow dot.

    • @mattdudley3789
      @mattdudley3789 2 ปีที่แล้ว +1

      Has nothing to do with the dot, as far as clusters of weights all over the place. That has to do with chasing weights, or not rejecting a bad tire in some cases... If a tire takes a lot/ abnormal amount of weight, you break it down and spin it 180*, which if your dots were lined up, they will be 180* off from where they were. Usually that solves a weight issue. If it doesent, or the tire has a lot of run out, then it should be sent back to supplier as defective... So if you take it to a GOOD shop, and you see they are not lined up, there might be a reason.

    • @TimNummy
      @TimNummy  2 ปีที่แล้ว

      @@mattdudley3789 keep it mind that it could also be from a bad/damaged wheel as well.

    • @mattdudley3789
      @mattdudley3789 2 ปีที่แล้ว

      @@TimNummy A bad/ damaged wheel would be obvious, in which case, you inform customer that the wheel is bent, mark it with a tire crayon and put it in the rear. Lot of times the customer will want a new wheel and you order them one. There is nothing more you can do with a bent wheel. You have to watch the tire in relation to the wheel to determine if it's the tire or the wheel. And the other thing is check that the cone is centered, because if it's not perfect, it's not going to work.. I've had first time customers come in with a shake, only to find that the inside beads on 3 tires were not fully seated at the other shop

  • @terryworcester5647
    @terryworcester5647 4 ปีที่แล้ว

    I really like this machine.

  • @georgekopsias9159
    @georgekopsias9159 3 ปีที่แล้ว

    Thanks for the video.

  • @RandornCanis
    @RandornCanis 5 ปีที่แล้ว +2

    You may have covered this while I missed it. Isn't the second air module an inline oiler? And, what if you lift on the table rotation pedal?

    • @summitdave8782
      @summitdave8782 5 ปีที่แล้ว

      Thats what i was going to tell him..lol

    • @TimNummy
      @TimNummy  5 ปีที่แล้ว

      It might be! I'll look closer next time I'm messing with it. And if you lift on the pedal the table spins the opposite direction.

  • @markariewilliams
    @markariewilliams 5 ปีที่แล้ว +1

    Brilliant thank you, would this be suitable to do Motorcycles wheels as well as cars?

    • @TimNummy
      @TimNummy  5 ปีที่แล้ว

      I'm sure it would be! And I hope it is, because I plan on changing motorcycle tires with it myself haha

    • @pedey666
      @pedey666 5 ปีที่แล้ว +1

      @@TimNummy yes you can do motorcycle tyres on them machines i used to work in a tyre shop for years. steel rims can put on table with the clamps inwards then brought out to clamp the wheel only use the clamp way you did for alloys keep the table clean and jaw runs clean and oiled as they can stick over time. on "sticky" beads use bit of tyre soap (lube) when using bead breaker as it acts like penetrating fluid on a stuck bolt

  • @Utsusemi
    @Utsusemi ปีที่แล้ว

    Is this transportable by a hand-dolly or hand trucks? I know the 560 machine weighs about 444 pounds in total. I would have to transport this to my backyard..

  • @tenehaglendening9246
    @tenehaglendening9246 3 ปีที่แล้ว

    What's your long term opinion of these thanks

  • @tylerschliep4397
    @tylerschliep4397 4 ปีที่แล้ว +3

    Nice machine, one word advice for next time, start the bead buster before all the air is out. It will help force the tire off the bead

    • @981porsche3
      @981porsche3 3 ปีที่แล้ว

      Tyler Schliep, thanks!

  • @jimbeam9977
    @jimbeam9977 2 ปีที่แล้ว

    Best advice I’ve been using for years, don’t work the tool… let the tool work for you!!

  • @Motoxryder247
    @Motoxryder247 2 ปีที่แล้ว +1

    Will this work with motorcycle rims too ?

  • @stacysmith9080
    @stacysmith9080 4 ปีที่แล้ว +1

    iv always thought about getting one..after watching your video.i will defently get one now

  • @no.1prepper181
    @no.1prepper181 5 ปีที่แล้ว

    What is the biggest size tire this machine will accept? Will it do tires for a lifted truck (~35") or will it really only work with smaller car tires?

    • @TimNummy
      @TimNummy  5 ปีที่แล้ว +1

      I think the changer will do 35" and the balancer will do 37" - really the limit on the changer is the mount for the duckhead, if you modified it to move that back you could do larger tires. And it's just 4 bolts, could easily make something out of 3/8 or 1/2 steel plate that would do the job wonderfully.

  • @melindadollarhide8603
    @melindadollarhide8603 3 ปีที่แล้ว +1

    Did you order it off ebay.how much was it an do you have a link

  • @johnzx14rk94
    @johnzx14rk94 ปีที่แล้ว

    Thanks Bigman.

  • @bikerdave1274
    @bikerdave1274 6 ปีที่แล้ว +7

    I know the alloy wheel had an odd shape inside rim but if possible it's best to clamp the wheel from the inside rather than from the outside on the rim. Two reasons, scratching the rim and possibly cracking the rim - learnt the hard way 😋

  • @samuelcaraballo5940
    @samuelcaraballo5940 2 ปีที่แล้ว

    Nice machine

  • @robertalvarado6337
    @robertalvarado6337 4 ปีที่แล้ว +1

    Did you test the balancer as well if you have a video of that

    • @olafito18
      @olafito18 3 ปีที่แล้ว

      I also want to see that

  • @ronnrogers9459
    @ronnrogers9459 4 ปีที่แล้ว +1

    Nice video

  • @robrigione7303
    @robrigione7303 3 ปีที่แล้ว

    I bought the cheap tire machine and balancer combo myself...they look exactly like the one in the video. Question: When I balance a tire, my machine shows me results in grams. Has anyone figured out how to change this feature to oz. The instructions suck.

  • @fabiolinares1895
    @fabiolinares1895 2 ปีที่แล้ว

    Great size

  • @dpgdpg5519
    @dpgdpg5519 5 ปีที่แล้ว +1

    Can u take off 22"

  • @fernandobruno772
    @fernandobruno772 3 ปีที่แล้ว

    Still have it? How's is it going anything brake?

  • @bobocaterpillar3697
    @bobocaterpillar3697 3 ปีที่แล้ว

    11:06 DUCKBILL also lube helps get the old rubber off too

  • @BimmerM5e39
    @BimmerM5e39 4 ปีที่แล้ว +3

    16:12 too many dogs man haha

  • @morganpirataguzman7519
    @morganpirataguzman7519 ปีที่แล้ว

    Nice video but i just lmao when he said , this pedal turns in this way and this other one in the same way hahahaha

  • @fast4d1
    @fast4d1 5 ปีที่แล้ว +1

    I balance the wheel by itself to verify stem is indeed the heaviest. Not always the case!

    • @981porsche3
      @981porsche3 3 ปีที่แล้ว

      fast4d1, good to know, thanks!

  • @nilocostibolo7407
    @nilocostibolo7407 2 ปีที่แล้ว

    is this able to use for motorcycle tire?

  • @T1nCh0
    @T1nCh0 6 ปีที่แล้ว

    Oh baby a triple!

  • @gregnokes9880
    @gregnokes9880 5 ปีที่แล้ว

    Did you ever hanve any issue with the arm that drops down to stretch the bead scratch any wheels? Does it work on motorcycle wheels too?

    • @TimNummy
      @TimNummy  5 ปีที่แล้ว

      I haven't yet and have used it on some pretty nice wheels. I haven't tried it on my motorcycle yet but there's no reason it shouldn't work.

    • @MCatwar
      @MCatwar 4 ปีที่แล้ว

      the bead is going to be very difficult to break with a motorcycle wheel and also sometimes it won’t clamp correctly. also yes the steel duck heads scratch wheels like crazy if you don’t use them correctly i.e. keep them “hovering” above the lip of the wheel and back out the whole arm wit the screw up top.

  • @rossilake218
    @rossilake218 11 หลายเดือนก่อน

    The Double Barrel Brat is the Bomb! Less terrible White bread. I'm looking into buying a machine, this or twin Busch. For home tires on my new powder coated rims, Shops keep scratching my S up. I 'm done with them. I saw a guy in Poland make one of these machines on YT.

  • @mrmotofy
    @mrmotofy ปีที่แล้ว

    988 Tire Changer (950 with 2 helper arms) Deliveries require a forklift to unload OR pay for Residential delivery + $150
    For clarification the 560 is the smaller unit up to about 18” rims has the square tube rear upright and requires assembly of the bead breaker.
    The 950 is the larger up to 22” rims, has the “Bead Blaster” and main rear upright is a round cylinder air tank. There's also the options of the 2 helper arms the #232 unit making the #988 unit and the other 300 with the black additional upright with 2 arms on it with a disk, the #300 unit making the #960.
    The Mayflower 988/680 pair can fit tight in a space about 80” wide IF the Balancer is turned sideways so shaft is out facing you. Other arm options will need more space. The 988 (950 changer with 2 extra arms) is about 45” deep.
    I used casters on the 988(950+ extras), Harbor Freight #62276 3” locking 100lb. NEED (QTY 8) regular 1/2”-20 nuts (ORDER or get at a regular hardware store. Home stores don't stock them but can order some). Unit is at or over the max weight of the casters so user beware. Remove rubber foot on bottom, just pops out. Install 1 nut all the way down on caster then insert up through hole and install 2nd. Caster shaft needs a spacer so could use 1/2” flat washers too instead of the first nut. Foot bracket is upside down U channel.
    1 Upgrade I added was a 1/4” NPT street elbow to the main airline input on the regulator after removing the factory Japanese style fitting the US doesn't use. That allows the air hose to hang down when connected instead of straight out the back. Then used a 1/4” male NPT to 3/8” hose barb to a 6' section of hose for a whip to move the connection out where it's convenient. That way it's easy to connect when using. Then I added a 1/4” NPT quarter turn valve so machine can be disconnected without losing all air pressure in case air supply line is needed etc.
    Another upgrade I did was added a higher volume airline. The “Bead Blaster” is almost a joke and SLOW. If you see the size of airline and the regulator it runs through you'll understand. I've seen a few add a line at the Regulator. That technically does work but doesn't have the flow capacity I desired. So I added a line to the tank(rear upright). Remove the included Tee for the gauge. Tank bung is 1/4” NPT so I used a Milton s-646 1/4” NPT Hex nipple into the bung using 4 layers of Teflon Tape on all connections. Then I used a Milton s-655 Brass 1/4” NPT Tee which has 3 Female fittings. One end screws onto the previous nipple so the middle connection is centered and angled down and back a little. The included Tank gauge Tee then screws into the other end of the new Tee. Then the middle is a port for a new hose to connect Using a male 1/4” NPT fitting like Milton s-602 1/4” male NPT to 3/8” ID hose barb and a hose clamp etc. I cut about an 8' chunk of another 3/8” ID air hose. I strongly suggest not using 1/4” hose. Then a quick connect fitting on the end. I use and highly recommend the High Flow Milton Type V couplers. You can use a regular air chuck or make a little bead blaster that runs way better. Use a quick connect fitting then a quarter turn 1/4” valve then a short section of hose and an air chuck that locks on. This is a much higher volume short hose feed off the tank. Smaller and more hose length are restrictions. You can now swap chucks and fill higher psi tires and a higher flow bead blaster. But care must be taken using the new bead blaster as it's got straight tank pressure. So use carefully and once bead pops insert valve and use a gauge to fill properly.
    680 Balancer Options/Upgrades
    Many truck rims will need an additional adapter cone with 5.5” diameter that's sold separately
    For best results the 680 Balancer, should be anchored to floor. Don't just bolt down unless floor is perfectly level where unit sits. Base is bolted down with (3) 3/8” threaded anchor bolts ideally with 2 1/2” of threads sticking up to level with. Method is below. I wasn't ready to anchor yet so leveled with 3 3/8” x 2 1/2” hex bolt, 6 3/8” flat washers, 6 3/8” nuts. A small thin rubber piece size of a tire patch works good on floor to help keep from walking across floor.
    Install a nut on the 3/8” bolt approx 1/16” from head of bolt, then a washer. Insert bolt FROM BOTTOM UP through holes on bracket then install 2nd washer and 2nd nut loose, then do same to other 2 holes/bolts. The lowest nut can be adjusted up and down to raise and lower the machine bracket sitting on it. Use a 2nd wrench as needed to hold the hex head while adjusting nut up/down. Use a 24” level on the side of the case to adjust till plumb side to side and front to back. Don't use the plastic tray on top, there's no way to know if it's level to anything. Use the base sides. Then when height is good tighten down the top nut to keep height. 1 wrench holding bolt head 2nd on top nut tightening. Essentially the machine bracket is sandwiched between 2 washers with a nut on top and below. Parking lot light posts are mounted similar for reference except threaded rods are in concrete. As the concrete anchors should be to secure it.

  • @rezkinginternational
    @rezkinginternational 4 ปีที่แล้ว

    13, 14's are easy, when replacing a size 15, it went 3/4's around and the metal bill bounced over the top, and would not press the tire into the rim

  • @nicks_quattro
    @nicks_quattro 3 ปีที่แล้ว

    clamps are mostly for some elevating rims to not scratch

  • @kanskeimorrn
    @kanskeimorrn 6 ปีที่แล้ว +21

    The double hotdog life =D

  • @juanlanda2441
    @juanlanda2441 3 ปีที่แล้ว

    So is this from china ? Was it a smooth purchase/ delivery?

  • @kellyleek9
    @kellyleek9 6 ปีที่แล้ว

    good video

  • @Akeem_768
    @Akeem_768 5 ปีที่แล้ว

    i'm thinking of buying a chinese machine, can anyone tell me if it makes much difference with the 110v vs 220v? its for a low volume shop

    • @981porsche3
      @981porsche3 3 ปีที่แล้ว

      Akeem, 220 will give you more power because it uses both phases, but you will have to have a 220 line run to the machine from the breaker box, if you don’t already have one. Most houses do not have 220 run throughout the house, but it’s common in commercial spaces.

  • @RL69420
    @RL69420 2 ปีที่แล้ว +5

    Really curious as to how the tire changer and balancer are doing after over 3 years of ownership. Found this pair for $2K which seems like a decent deal, just curious of reliability.

    • @Area-cf1gt
      @Area-cf1gt 2 ปีที่แล้ว +1

      Ive had a cheap china model for 6 years personal use and a bunch of odd jobs on the weekends. They seem to hold up good along with the wheel balancer i dont keep em clean and i beat on my tools lol

  • @jakescorpion1
    @jakescorpion1 2 ปีที่แล้ว

    Nice rig

  • @toomanymachines
    @toomanymachines 2 ปีที่แล้ว +1

    to help break the bead on shitty tires that flop around , keep some air in them. do the back side first, but do not press it all the way off, just down the ledge, flip it around and break the front side bead. You have to do that for atv tires. 5 to 10 psi. My tire changers run on 180 psi, so I can break beads on tires with 30 psi if needed.

  • @consaka1
    @consaka1 4 ปีที่แล้ว +2

    I suggest getting some non water based "glycerin?" lubricant made for tire work. When dismounting the tire it can help to spray a little soapy water along the bead as you are trying to break it. Later this soapy solution will help lubricate the foot as it pulls the tire over the rim.

    • @TimNummy
      @TimNummy  4 ปีที่แล้ว

      Soapy water seems to be pretty widely accepted for tire mounting. Including in the datasheet on tire mounting published by Toyo tires... www.toyotires.ca/sites/default/files/imce/Databook_mdtrktires_tireandrim_pgs_26_30_0.pdf

    • @consaka1
      @consaka1 4 ปีที่แล้ว +2

      @@TimNummy Sorry but this is absolutly wrong for steel rims. You might get away with it on alloys but even those could corrode at any nick. Whoever wrote that for Toyo should have been fired. You do not want water inside your tire. Ever!
      There is a reason glycerin based lube is made and used by professional tire shops. Even I have it for personal use because I know water does not belong in tires. Besides, it works better for mounting tires. I even gave a tub to my dad who mounts all his tires by hand. Glycerin lube works better and won't cause your rims to rust or corrode.
      Once you have tried to dismount a leaky tire from a rusted rim you will wish you never used soapy water. I have fixed many tires leaking around a rusty rim. It's kinda a pain. Sometimes the wheels have to be completely junked.
      In the old days, you didn't have anything but soapy water. We all used soapy water. If you have to use soapy water you need to make sure its mostly just the soap part. In fact, I wouldn't add any water if I had to use soap.

    • @mattdudley3789
      @mattdudley3789 2 ปีที่แล้ว

      @@consaka1 Freylube on the beads of the wheels, it's an anti corrosive, no leaks ever, and NEVER use bead sealer. And actually my shop uses a water based tire lubricant. We fix other shops shoddy work all the time, and can tell our work by looking at the hub face. Most of our customers are return customers due to the quality of work

    • @consaka1
      @consaka1 2 ปีที่แล้ว

      @@mattdudley3789 I have no idea what bead sealer is. I've never really had bead problems. Except one time when the little bar code sticker went right across the bead area. Little seep that I found pretty fast. Removed the sticker and it sealed just fine.

    • @mattdudley3789
      @mattdudley3789 2 ปีที่แล้ว

      @@consaka1 Some lawn and garden tires and lots of ATV tires have little nubs that need to be ground off or they won't seal.. Bead sealer is the black goo that pretty much every cheap tire shop uses rather than cleaning corrosion.. I'm in NY, so we even have to needle scale steel wheels on older vehicles.. But the wheels we service never rust again

  • @pbservano
    @pbservano 3 ปีที่แล้ว

    What is the brand and model of tire machine.

  • @jsingleton17
    @jsingleton17 3 ปีที่แล้ว

    Any chance you know what size the female coupler on your air supply line is?

    • @TimNummy
      @TimNummy  3 ปีที่แล้ว +1

      I'm not sure. I can try to check and let you know

  • @jkkalands1783
    @jkkalands1783 3 ปีที่แล้ว

    Where do I buy those machines? Pls help.

  • @buzzerd48
    @buzzerd48 4 ปีที่แล้ว

    How much was it delivered??

  • @Shirkatron
    @Shirkatron 3 ปีที่แล้ว +1

    I would love to see a follow-up video, to know the durability and short comings of these machines are. I'm interested in buying a set for my small shop to get me buy until I can afford a $10,000 set when I expand.

  • @mejoresmomentos7279
    @mejoresmomentos7279 4 ปีที่แล้ว

    Hey buddy, what is the hose behim the arm for?

    • @diamondheat9
      @diamondheat9 4 ปีที่แล้ว

      Didnt you see in the beginning? It is the air gauge and air line to fill the tire after you set the tire. It is on a hanger on the arm.

  • @cj599
    @cj599 3 ปีที่แล้ว

    Did u figure out what you were doing wrong breaking the bead yet ?

  • @angelroselargonio875
    @angelroselargonio875 3 ปีที่แล้ว +1

    How much for this items tire changing?

  • @deviousmonkey8516
    @deviousmonkey8516 5 ปีที่แล้ว

    If I buy this, is there duck head replacement available ?

    • @TimNummy
      @TimNummy  5 ปีที่แล้ว

      THATS THE NAME OF IT!!! I couldn't remember haha... It looks like there is though: amzn.to/2OFoEn4

  • @reyesjuanjose94
    @reyesjuanjose94 4 ปีที่แล้ว

    Look decent not bad

  • @johnnypower6674
    @johnnypower6674 2 ปีที่แล้ว +1

    Nice

  • @duggerinc
    @duggerinc 10 หลายเดือนก่อน

    valve stem up and down when there is a tpms sensor in the tire. the bead breaker will bust the sensor! and take the rim weights off first.

  • @benault773
    @benault773 5 ปีที่แล้ว +7

    This was super cringey to watch but not everyone is an expert the first time they touch these machines, lol. The plastic covers for the clamps are for when you have a reverse drop wheel, so the drop center is closer to the back side than the front side. With these style wheels, you have to mount so the outside of the wheel is facing down on the machine. The plastic covers keep it from scratching the wheel. Also, I recommend having the wheel clamped when you set the bead. When tires explode the wheel goes flying in whatever direction its facing. The mag machines don't offer protection or enough clamping force to stop this but it sends the wheel in a desirable direction. Better to have it fly up and give you a chance to cover your head than it fly into somebody's legs.

  • @King.Cleveland
    @King.Cleveland 2 ปีที่แล้ว

    how to get one

  • @majustice1
    @majustice1 2 ปีที่แล้ว

    Lift up on the pedal to go the other way if it has that feature

  • @tuchleggo2994
    @tuchleggo2994 ปีที่แล้ว

    What is the cost for it

  • @frichsamboy1066
    @frichsamboy1066 ปีที่แล้ว

    Magkano po ang price ng automatic vulcanizing machine

  • @mejoresmomentos7279
    @mejoresmomentos7279 4 ปีที่แล้ว

    I have same machine my turn table quit turn do you know what cause that.?

    • @adamfpv8294
      @adamfpv8294 4 ปีที่แล้ว

      mejores momentos most likely a bad capacitor. But it also could be the foot switch or wiring somewhere.

    • @mejoresmomentos7279
      @mejoresmomentos7279 4 ปีที่แล้ว

      Adam FPV thank you buddy I found the problem,do you know how I connect the child the hight blow air is behind?

    • @mejoresmomentos7279
      @mejoresmomentos7279 4 ปีที่แล้ว

      *higth blow air is behim the machine?

    • @Bos742
      @Bos742 4 ปีที่แล้ว

      mejores momentos take the left side cover off and you will find an electric motor with belt that drives the table, could have broke the belt or it came off. Also you will find a switch inside that the pedals connect to and controls the flow of current for which way to turn the motor. It might have went bad, or a wiring issue.

    • @omfug8593
      @omfug8593 2 ปีที่แล้ว

      It was made in China 😀

  • @samuelcaraballo5940
    @samuelcaraballo5940 2 ปีที่แล้ว

    Price on this combo’s

  • @shaneandlauriebrown6266
    @shaneandlauriebrown6266 7 หลายเดือนก่อน

    Red dot is priority over yellow dot when tire has both. Align the red dot with valve stem.

    • @TimNummy
      @TimNummy  7 หลายเดือนก่อน

      "Align the red dot with valve stem." This is wrong: www.yokohamatire.com/tires-101/maintenance-care-1/mounting-your-tires
      Priority also depends on the existence of the indicators on the wheel.
      Thanks for watching and commenting though!

  • @TheGarywilliams
    @TheGarywilliams 5 ปีที่แล้ว

    How has it been holding up

    • @TimNummy
      @TimNummy  5 ปีที่แล้ว

      Really well so far - I've done at least half a dozen tire changes with it as well as random patches and things here and there and haven't had a problem.

    • @dalegastv4637
      @dalegastv4637 4 ปีที่แล้ว

      How it holding up know is it still good? Iv been thinking about opening a small shop I live in a small town do you think it will hold to start off ?

  • @Shirkatron
    @Shirkatron 3 ปีที่แล้ว +1

    11:59 we call it the duck bill

  • @user-mm3vg1zc2o
    @user-mm3vg1zc2o 7 หลายเดือนก่อน

    How much price

  • @ashrafansari2036
    @ashrafansari2036 3 ปีที่แล้ว

    How much price chnger machine

  • @teodoroveluz66
    @teodoroveluz66 2 ปีที่แล้ว

    Free shipping ba pag bumii ako

  • @johnnyd9328
    @johnnyd9328 2 ปีที่แล้ว

    The price I ne6 to know please

  • @RawTopShot
    @RawTopShot 5 ปีที่แล้ว +4

    Who you been punching? 😂👍

  • @cbb9553
    @cbb9553 4 ปีที่แล้ว +2

    Actual video starts at 8:00 you'r welcome

  • @dannylongest6138
    @dannylongest6138 ปีที่แล้ว

    I just bought this wheel changer $1598 dollars got mine from California next week coming to my home

    • @snipershot8049
      @snipershot8049 ปีที่แล้ว

      from where you got it for 1598 did you get the pair or just tire machine?

  • @nikkasinghsingh3828
    @nikkasinghsingh3828 2 ปีที่แล้ว

    Sar Ji price kya hai

  • @miguelgabrieldiaztorrez5153
    @miguelgabrieldiaztorrez5153 3 ปีที่แล้ว

    Que presio tiene uno

  • @mohideenrajasikkander5063
    @mohideenrajasikkander5063 3 ปีที่แล้ว

    which country machine price pls

  • @patrickstewart4620
    @patrickstewart4620 4 ปีที่แล้ว

    Thought the red dot took precedence over the yellow dot if a tire has both (15:57)? Great video! thanks

    • @TimNummy
      @TimNummy  4 ปีที่แล้ว

      It does as long as the wheel is marked as well

  • @nikkasingh8793
    @nikkasingh8793 2 ปีที่แล้ว

    Machine ka price kya