3D Structure Scan. DO YOU NEED IT? Side by side 3D comparison! Simrad Lowrance +PRO SETTINGS!
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- A great SIDE by SIDE comparison between NEW 3D and Enhanced SIDE Scan.
Professional settings show as well. Simrad. Lowrance. Navico.
Email me mikesmedley9@gmail.com
OUR GEAR=
3D System amzn.to/2Ui0F43
EVO3 NSS12 amzn.to/2EgacA0
TM 150 M amzn.to/2BsVMud
Accurate Valiant reels we use;
amzn.to/2WPEqB5
MONO LINE /PRO SPEC
amzn.to/2X1BbGP
By far the best explanation of structure scan. Thank you! Now I completely understand what I'm looking at.
IMTipSea THANKS! I appreciate you taking the time to post this. Thanks again.
@@MikeSmedleyOLDSCHOOLSTRIPERS I have the 2018/2019 version of the StructureScan HD thru hull transducer from Simrad paired to a Simrad NSS 9 evo3 display. Does my system have enhanced side scan or just regular side scan?
Excellent video showing both 2D & 3D SideScan. Thanks for sharing.
You got it Tom!! Thanks for commenting!
👏👏Thank you Mike, I definitely am going to add this to my boat 👍
After watching this video i believe that you should stay with side scan only, I don't see any improvement on 3d scanner, side scanner was getting a lot better information and more detail in my opinion.
The screen on that Sim radio makes lowrance touch screens look like atari's. It actually looks nice and clear like the HB screens
Agreed, that Simrad screen is totally epic
excellent presentation
How is your 3D screen so stable? Compared even to the 3D simulation, which is quite jerky or unstable. Do you have that compass puck thing? Is that what makes urs so stable?
Thanks for sharing
I’m not sure why that is. Maybe it’s the newer software.
We have 3d with dual transducers. How did you get such a clear picture of the bottom? Seems like something is not set right on our unit
The latest software update makes a big difference. If you haven’t done an update I recommend doing one. 👍👍
What transducer model are you using and in order to run 2 evo do you have to mount 2 transducers? I’m about to pull the trigger on the 12” but if I can get two 9” and mount them side by side flush and only use one transducer I will do that. I have the Simrad Go9 right now with the total scan transducer. Is that the one needed for the evo or a better one? Thank you
I think the simrad is way cleaner then the lowrance. My hds 12 is not even as hd as this
so will the simrad do the 3d with the total scan transducer
Fantastic video. Thanks
Thanks Brother!!!! I appreciate that.
I hear simrad is coming out with live scope have you heard anything? Forward facing transducer high definition? Have you heard anything about this?
Mark Drown I wish I knew brother. They don’t tell me much ahead of time 🤨
thanks for sharing. im trying to wrap my head around where the boat is in relation to the image on the side scan. Do you put the transducers on front or back of the boat? If they are in the back, does it mean everything you are seeing on screen is behind you?
PJ Jackson it’s on the transom. So yes, everything on the screen is behind you.
PJ Jackson always needs to be on the back n the right hand side if u out it in the left u will get problems when driving in idle speed or faster
Great video
Thanks brother!!!
Mike, will this work exactly the same with lowrance hds gen 3 units after purchasing the 3d transducer and amplifier?
chfar072281 yes sir, it is the same.
Mike Smedley Thanks Mike!
How did you filter out the bubbles coming off the back of the boat? I can't see the much cause I get a ton of them off the hull.
Nevermind, Just hit that part of the video. Thanks a ton man. That was driving me nuts
Cool! Thanks for watching!
How many knots are you doing? What area could one scan in an hour using one of these?
Does well up to 12 mph.
Mike Smedley Hi Mike, that’s super. I was wondering then how long it would take to scan a square mile, if I was looking for something at 300 ft? I guess you can do 1 mile length in 5 minutes but how many times would you need to snake back on yourself? Is it 5280/200 or 26 times? So is the theoretical answer about 2 hrs? Practically speaking though more like 4 hrs? Reason for asking is I know where $3-4m of gold is but it’s in about a 31 sq mile area, and it got me thinking about the economics of this stuff.
James Richardson wow!! Alot depends on large the structure is, and how far it sticks up off the bottom. You can actually go quite faster if it’s a large piece of structure. If it’s very small you would have to run a cross hatch checker board to see every detail, but something that sticks 2-3 feet off of the bottom would be easier to see, especially if the surrounding area is flat. If you are in deeper water you can see more of the bottom, so the deeper the better in this case. I hope this is a legal undertaking brother. If it is, GOID LUCK!!
Mike Smedley The draft of the target is 20 ft and sank between 1850-1900. Length is well well over 100 ft. The target is wooden so may be a bit decomposed by now but it has an anchor.
please Mike , i need to know max depth operating for 3d modul
+Bensaid Rachid RBS I would say 100 ft or so to effectively use the 3D. The side and down Scan work much deeper. I do know guys that use the 3D in water to around 200ft , but I use down scan and side scan at those depths.
thank you Mike for your pompt replay . brgds ,😁
How much did that 3d side scan cost?
It was around $800 when it first came out for the box and transducer.
Can that device scan underground??
I am just about to buy my 1st 3d structure scan unit but can't make my mind up ...Lowrance or Simrad . Any help or advice would be appreciated !
They both are the same technology wise. The Simrad gives you a little more in the Radar department and has a nice real glass screen vs Lowrance plastic. That's pretty much it.
+Jay 1 SIMRAD 😉
Hi Mike I have a Lowrance 7hds on my boat and want a 12 inch structurescan, So the Lowrance Carbon seems the most logical. Would the Simrad 3d structurescan be compatible with my 7 inch hds !
using cool cutting edge technology is 'old school'?
Johnny Pea 😉. Old School is about putting in the work, respecting and helping others, and owning your short comings. 👍👍👍👍
MS - if that is the definition, I want to be new school and be lazy, unhelpful, and be oblivious to my own issues
Johnny Pea NICE.
In ten feet of water how far can you see off the the side of the boat in 3D mode? I am thinking of buying this to use and average depth is 10 feet and was wanting to see how far off to the sides I can see. Thanks for any help with this matter.
In 3D mode not very far, roughly 3 times the depth. Maybe a touch less in 3D.
What Simrad model/screen sizes are these two units?
Richard Davidson both are Evo2 displays. 9" and 16".
Mike do you recomend simrad over lowrance ?
Mike do you recomend simrad over lowrance ?
Mike do you recomend simrad over lowrance ?
Yes sir. 👍
What depth is it good for? I know things fade out so how deep will this give you good detail to.
Kathy Jackson the actual "3D" page does OK to around 100ft during my personal use. I did a video showing that here th-cam.com/video/RC5CxnHm4BQ/w-d-xo.html
The side scan works excellent in every depth I have used it in. I don't fish very deep. Around 150 is the max usually. The ENHANCED side scan that come with the 3D is just awesome. It uses several elements to each side to perform well in various depths. I hope this helps.
Thanks, we fish off shore for swordfish down to 1800 feet of water
Kathy Jackson wow! I would say that is a bit too deep for the 3D😵. I have been testing and comparing several Airmar Transducers for them. I don't know what you use for reg 2D Sonar, but the 275 H/L wide is a beast and probably the top of the sportfishing line. If you have only single CHIRP capability the b175 or tm185 in high Wide is also sick and excels at those depths. (Especially the low CHIRP on the 275).
What reference have the equipment
andres A I’m not sure I understand your question.
The 16” Display is Simrad NSS Evo2.
www.boemarine.com/products/nss16-evo2-network-multifunction-display-open-box?variant=305727209491?ref=8
The 3D Structure Scan system
Is
www.boemarine.com/products/navico-structurescan-3d-sidescan-imaging-f-hds-gen3-nss-evo2-nso-evo2?variant=22399486663?ref=8
Please let me know if this is the info you needed. Thanks!
Mike Smedley. My question is, if with this Simrad equipment, I can generate my own contour lines of any body of water, make bathymetries and extract the information. I want to know if this equipment allows me to generate cartography of new lakes, rivers, and if you can get the contour lines in the computer
andres A yes. You can make your own maps using Insight Genesis with Evo2 and make live maps with Evo3.
Am I the only one who doesn't quite get side scanning? It just isn't clicking.
You are not alone. How do I look at it? On a side?
Raymarine Axiom looks way better
Roque Agasid LoL funny