Side Scan SETUP! ACTIVE IMAGING SETTINGS. 3 in 1 Transducer
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Setting up SIDE SCAN with Active Imaging is VERY simple. THESE ARE THE BEST SETTINGS! These can be used with ALL Simrad and Lowrance Displays that are compatible. Thanks for watching.
PLEASE SUBSCRIBE! IT’S VERY FREE!
BELOW ARE AMAZON LINKS:
NSS9 EVO3 amzn.to/2Bs18pO
EVO3 NS S12 amzn.to/2GY9QPn
EVO3 NSS16 amzn.to/2DyiPUN
Go 5
amzn.to/2IPZfaD
Go 7 with Active Imaging
amzn.to/2J6OIXi
Go 9 with Active Imaging
amzn.to/2XCVw8g
TM 150 M amzn.to/2BsVMud
Accurate Valiant reels we use;
amzn.to/2WPEqB5
Go 9 XSE RADAR AND TOTALSCAN
amzn.to/2UTS83T
MONO LINE /PRO SPEC
amzn.to/2X1BbGP
SONIC HUB 2
amzn.to/2Xf1GbM
SIMRAD/LOWRANCE GS25 GPS ANT. Rate compass-Heading sensor.
amzn.to/2Eny0le
NMEA BACKBONE STARTED TER KIT. amzn.to/2GY00xJ
B 175 H WIDE 20 DEG. 9 pin Evo3 end. amzn.to/2Tg9YAU
B 175 12 degree Thru hull Transducer
amzn.to/2FfC6Ls 7 Pin Navico.
B 175 High Wide Thru- Hull 12 degree 9 pin. Evo3 amzn.to/2F87OdM
Halo 24in Dome.
amzn.to/2U4tAp3
ACTIVE IMAGING 2 in 1 Transducer amzn.to/2IjtJDE
ACTIVE IMAGING 3 in 1
Transducer
amzn.to/2ErP9ug
TM 185 High CHIRP Wide Xsonic plug end
amzn.to/2XDLJw7
Total Scan
amzn.to/2naJYcf
Airmar Adapter 9 pin to 7 pin Blue Navico Legacy port
amzn.
Go9 Display With C-Map Pro Chart’s installed 3in1 Active Imaging Transducer and 4G Radar. BUNDLE.
amzn.to/2FnuAQb
Sonar Hub
amzn.to/2Wy5xQd
3D System amzn.to/2Ui0F43
Simrad Go 12 XSE w Total Scan
amzn.to/2PHE7oO
Simrad Go 12 XSE no transducer
(Get Total Scan Transducer for $10 more)
amzn.to/2DHhcVJ
Aftco Tactical Fishing Shorts
amzn.to/2FmVN4Y
amzn.to/2xahNvA
OLIGHT WARRIOR FLASHLIGHT
olight.idevaff...
USE CODE MS10 for GREAT DISCOUNTS.
OWNER MUTU CIRCLE HOOKS 40 pack. GREAT HOOKS!!
amzn.to/325i8xC
Accurate Fury Reel 400 Regular
amzn.to/2XTvZZK
Accurate Fury Reel 400 Narrow
amzn.to/2Y4izJD
Accurate Tern Reel 300 Narrow High Speed
(same size as 400 Narrow in Fury and Valiant)
amzn.to/2XQkYbl
Accurate Tern Reel 400 High Speed Regular
amzn.to/2XOFZ6b
Ben Parker Magnum Flutter Spoon
amzn.to/32x6lZk
Accurate SR 6 Spinning Reel
amzn.to/2xUkotS
Wright and McGill Inshore Slam Spinning Rod
amzn.to/2XSCXZT
ABU Garcia 6500 Reel C3
amzn.to/2XUEXpD
Shimano Large Butterfly Spoon Folder Storage
amzn.to/2XQUYYA
Cuda Piranha Scissors
amzn.to/32zJagL
ABU Garcia Inshore REVO Baitcaster Reel
amzn.to/2JRdpaN
ABU Garcia Inshore BEAST REVO Baitcaster reel
amzn.to/32vBlc4
CLAMP-ON LINE COUNTER
amzn.to/2XRr9Mm
Bunker Spoon
amzn.to/33nFqzb
Bunker Spoon/Mojo Combo
amzn.to/2PW5FJ1
Tony Maja Magic Mojo
amzn.to/32pOp1o
Boat/Motorcycle Alarm.
2 remotes.
amzn.to/2JX3CkH
Boat alarm (Farmgate motion detector) amzn.to/2LLy6If
REDI RIG TOS PLANER RELEASE FLOATS
amzn.to/2O1nVl2
REDI RIG TEAR DROP RELEASE FLOATS
amzn.to/2SlPJiq
Custom Cutting boards email.
FATFISHDesignz@yahoo.com
Mention Team Old School for the HOOK-UP!!
POP OUT ROD HOLDER RAILS
JOEY SCRUGGS
1 (434) 907-1656
Ce Smith Heavy Duty
Flush Mount Rod Holders 30 Degree
amzn.to/2NwkJeU
Ce Smith Heavy Duty
Adjustables Rod Holders - NO TOY!
amzn.to/34LwPGD
This is a list of all of our gear in different sizes. If you buy any Navico-Simrad-Lowrance- Airmar Fishfinder Chartplotter products using these links, you will receive LIFETIME setup and adjustment help from myself by email or text.
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens th-cam.com/users/postUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
Understanding and knowledgeable customer service. Very helpful.
🙏🙏🙏🙏👍
Thanks for all the great tips with the equipment
👍👍😁😁
Thanks for another great tip, Brother!
Glad you like it!!!Thanks brother!🙏😁👍
Thanks Mike, videos are awesome.....Tight lines...
Thanks brother
Nice. I need someone to do some Helix 9.lol
Sorry brother.
@@MikeSmedleyOLDSCHOOLSTRIPERS lol
Double thumbs up...
Thanks Mike. I don’t know why, but it’s so difficult for me to distinguish what I’m looking at in side imaging. Is it a fish? Is it a rock? Is it a mermaid 🧜♀️
You see those black lines after you hit the bottom? Are those supposed to be normal? I’m new to Lowrance. I also have a Garmin GT56 transducer but those black lines don’t showed on my gt56. It really doesn’t affect my picture on the 3/1 but I was just wondering if I’m doing something wrong.
Can you see fish with the older totalscan 3in1 that came with my go9xse?
Sure. The biggest improvement with the Active Imaging model is in the side scan. It is the best side scan I’ve seen in any brand, it’s really incredible. The Total scan shows fish well, but the Active Imaging is really amazing.
I think most people def overthink this
👍👍
Hi Mike. Will it work with the evo2 as well?
Hey brother!! Unfortunately it won’t. Evo3 and Go only.
Hi Mike.
Can i create map with active imaging 3 in 1 on simrad evo 3 while i use sidescan
Yep. You will need a Navionics PLUS chart card updated with the newest updates and then turn Sonar Chart Live on in the chart menu👍.
@@MikeSmedleyOLDSCHOOLSTRIPERS thank you Mike.
Does it use side scan data or down scan or both when creating the map? And can navionics boating or cmap also do this?
How has the active imaging allowed 800 freq without the loss of range?
Pretty crazy right? Industry secret I guess, but increased ping speeds and additional elements is partially responsible. 👍
I’m definitely not getting the most out of my side scan on my evo 3 and it sucks would love to talk to you about it and I have a 239 SP
Shoot me an email mikesmedley9@gmail.com
Have you had a chance to use the lowrance hds live active imaging? I ordered one and I hope my imaging will show fish in the water column. Like yours do.
I have not personally. I’m sure it will. 👍👍
I want to use this is deeper water to see pelagics out to the side of the boat. Would you use 400 or 80p for that?
The Active imaging transducer’s 800 is amazing. It shifts through multiple elements so the range is awesome. You will see all kinds of life out there in open water. I don’t know how good the bottom detail will be but the open water targets will be there👍
Will be too deep to even show bottom....
Do u like the active imaging transducer better than the old 3d transducer and box?
I like the side scan in the active imaging better yes. This one. amzn.to/2ErP9ug
Hi Mike. Will this transducer and the TM 275LHW interfere with each other if operating at the same time?
I run both everyday on Evo3. I see no noise at all. The Airmar transducers are so clean and quiet they play nicely with all of the transducers I’ve tried 👍👍. They are awesome.
@@MikeSmedleyOLDSCHOOLSTRIPERS thanks Mike. I see there is a new HD version out now for the A/I 3 in 1 transducer…your thoughts on this? Is it worth spending the money to upgrade from the non HD version to the HD version?
I have the Total Scan Transducer with Evo 3 unit. To view bottom or sides of channels, where should I run it? Thanks
Definitely in 455 always. That’s the most important thing. TVG 0-1. Range wide out until you see the darkness appear on the outer edges, then bring it back in one click. Bring it in 2-3 clicks if you want slightly better detail. 👍👍
Hi Mike, I just did an update on my simrad evo3 and now i dont have the option to choose downscan on the structure sounder??? and my unit won't shut off. can you help with this??
I have a question. Im running a client's 28' whitewater with two EVO 3's but the down scan and side scan wont work.. Im not sure what transducer is installed and neither does the owner. Im at witt's end here. I do see CH1 and CH2... but hell, no matter what I do, I cant get them to work. down scan kinda works when we are at the dock but as soon as I leave the dock and head out its just black with a blue bar at the top. The side scan is completely black shows nothing. Any suggestions?
The channel selections are just for traditional sonar. They aren’t for side or down scan. On the side scan page go into the menu and look for source. You might have the wrong source selected. If the side scan transducer is connected to the left screen select THIS UNIT only on the left screen. If you want to use it on the right screen select the other screen in source, just don’t select THIS UNIT on the right one if the transducer is not plugged into it. If you’re losing bottom when you leave the dock check your range. Set it to auto or set it deeper than the water you’re in at first.
@@MikeSmedleyOLDSCHOOLSTRIPERS there are two machines but only the right side machine has the transducer plugged into it. We use the left one for GPS/chartplotting. I fiddled with auto range but nothing happens. Do you need a special transducer for the side scan and down scan to work? Maybe the transducer installed doesn't have the capability?
when you buy the machines they dont come with the transducers, right? We do get options for high/med/low chirp though. plus 200khz, 83kz/ 50khz. THis is driving me crazy dude! I need to figure this out.
@@MikeSmedleyOLDSCHOOLSTRIPERS also, since we dont know whcih transducer is installed, we have it "unknown" selected as the transducer type so maybe something weird is happening there. There is a tag on the transducer cable that reads XID V1.33 11-010-01 REV2 but really cant find much on that.
@@Cptpaul12 Evo 3’s don’t come with transducers. You can look on the transducer cable tag on the back of the screen to see what you have.
I have an Elite 9Ti and on my side scan I have no picture, just the line in the center, any ideas?
I’m not terribly familiar with the Lowrance side, but try taking your 2D sonar out of CHIRP and setting it to 83 or 200 and then Go back to side scan.
@@MikeSmedleyOLDSCHOOLSTRIPERS I’ll try that tomorrow. Thanks!
do u have a picture of how low or high u mount your transducer... thank i can see to the right but cant see anything on the right i think my motor is blocking it...
siv aing shoot me an email. I’ll get you a pic. That’s a common problem when mounted too high. You want it as low as possible. I have a 12” jackplate so I can mount higher than most. My skeg doesn’t block the side scan since it’s back further. Mikesmedley9@gmail.com
Mike Smedley do you mount the active imager to the jack plate? I’m getting ready to plan out the transom on the shop boat and to demo it I’m going to have an AI, SS 3D, a standard skimmer, and the Airmar High Wide. I think I’m going to do the 3D and AI on the jack plate, the HW on the starboard side and the skimmer on the port. Could you post a video on your multi transducer install? Thanks!
Performance Marine AZ I would not mount to the jackplate. The transducer will come completely out of the water at 10mph or less in some situations. That’s no good. We mark fish at plane speeds. I have had as many as 6 transom mount transducers on at once for testing so it can be done. This is an older video but you can see some of the transducers I had at the time.
th-cam.com/video/9i15P5TV4tw/w-d-xo.html
Here’s another. th-cam.com/video/4XofQS4gMj0/w-d-xo.html
So in say 5 feet of water the range will be very limited?
Yes, but not as limited as the older systems. In 5 feet of water the range would be 20-25 feet to each side or more.
Thanks so much. Live in Florida and have been struggling with why I had such a short range. Tryed it in some deeper pits this morning and had great results.
Cool!! 👍👍
Can you help me once more?
I got the new unit from simrad had 18.3 i updated to 19.1
Everything is working with s5100
Only issuse i have now is
When i go to this unit ch2 i cant find AI 2 in 1 transducer in the list its pluged into port 2 black
But side and down scan still work under Unknown
disonesto You shouldn’t find anything on the sonar page for channel 2 because it’s not a 3 in 1. There are no Sonar options, only side scan and down scan.
@@MikeSmedleyOLDSCHOOLSTRIPERS everything works fine. But the weird thing is when i had the defective unit that i sent back to simrad that was on 19.1.1 i was able to select AI 2-1
The one they sent me had 18.3 that i updated to 19.1
Everything works. It just dosnt detect ch2 AI 2-1
It also works with under network this unit ch2 unchecked. Im guessing that is only for sonar because thats the only place it removes it from
I’m not sure why it was selectable the first time. Because it has no sonar elements it’s strictly a structure scan transducer. It shouldn’t show up in any sonar situations at all. On structure San pages you should be able to select THIS UNIT but there should be no options on a sonar page.
@@MikeSmedleyOLDSCHOOLSTRIPERS its will only show up on the sonar page with wrong Frequencies if i check the box that says this unit ch2 under networking. If i leave both boxes unchecked ch1 has nothing pluged in and i leave ch2 unchecked since its not a sonar. Side and down both work fine. The only box i have checked is networking for s5100
Thanks for the video. Are you using the 3 in 1 on its own, or also with the structure scan 3D box, to get your great side images? I just picked up a Carbon 9 at the Cabelas sale, seems like an awesome deal
It’s the 3 in 1 Active imaging transducer plugged straight to the Display. 👍👍👍
@@MikeSmedleyOLDSCHOOLSTRIPERS sweet! Do you recommend using the latest software update for Carbon? Some people talk about there being a sweet spot on Lowrance updates, and that performance can drop with the latest ones.
@@FishStalker777 Unfortunately i am not as familiar with the Lowrance side. I use the newest software on my Simrads though.
hello, sorry for the inconvenience, I wanted to ask you for advice, I bought a hdslive9 with the spnda imaging.3-1 and I wanted to ask you for advice, I saw that it contains 4 types of frequency (high chirp-medium- chirp/ 83e 200) I practice trolling with live snapper on a seabed ranging from 50 meters up to 90, for this type of depth which frequencies should I use? should I use only one or at 50 one frequency and at 90 another type of frequency?, I accept valuable advice thanks
Leave it in Med CHIRP all the time. It has the widest cone and has much better deep performance 👍👍