I don't know the specific case they used but it looks like a typical Pelican or Nanuk brand case. Just get the measurements of all the gear you want to case in the case and then get a case that is about 2" or so larger in all dimensions. They can come with cubed tear out foam so you can customize them for your gear.
Yes, how do I get an image to feed from another monitor to the switcher, that is not hooked to the main computer but is connected to the projectors for in house? I want to put up the slide for ways to give from ppt .Is there a way to run an hdmi cable from that monitor to the switcher?
It is! Selecting the source from the top section will punch immediately to that source instead of having to select a standby source and switching to it.
Hi Esteves, outputs 5-8 are talkback program outputs, so they only send the program feed. You have one aux output which you can send any source you would like to. I hope this helps! Useful link: www.blackmagicdesign.com/products/atemtelevisionstudio/techspecs/W-APS-08
블랙매직디자인 스위쳐 ATEM Television Studio HD 믹서에서 카메라신호와 마이크 신호 받아서 프리뷰로햐서 자막기에서들어가서 hdmi해서 캡처보드 보냐는대요. 믹서에서 멀티뷰 말고 출력단자가 4개sdi단자있는대 바로 출력하면 자막기에서 자막 입혀서 나가서 캡처보드 / 자마막기에서 자막 입혀서 믹서에 4개 sdi 단자로 출력 가능할까요?
I hava a 2013 Mac book pro how I can connect / configure the black item 4k studios to my laptop ,knowing this MacBook docent have internet cable connection
one quick question for you, why did you use Belkin USB C LAN? What if I don't have any Belkin USB C land programmed in my computer. And also, do I need to use a compatible computer that will configure a signal of the atem software control?
Hi there! We selected Belkin USB C LAN because that's the LAN adaptor we use. Realistically, you can use any ethernet to USB-C LAN adaptor and select that instead. I'm not sure what you mean about configuring the signal of the ATEM Software Control though.
Thanks for the video. My system still don't get to detect atem switcher. I got the swutcher software perfectly but for my program out for propresenter I'm have big issue connecting to my pc. I detects the pc but blank
Yes that is possible. If you click into the audio menu at the bottom you have access to a digital audio board. In that menu you are able to toggle on and off audio from each individual audio and video source.
Why is it emphasized to "NEVER USE THE MASTER COMPUTER AS A VIDEO SOURCE?" If I wanted to use OBS virtual cam as a video source, on the same computer as is being used as a master computer, this can't be accomplished or is it not advised?
With this particular piece of equipment you are unable to record internally. You are able to attach separate recorder. If that is a route that you are looking to go then you are able to record the program mix (this loops out of the top SDI) as well as 1 of your other inputs. The latter can be assigned and pushed out in the 1 aux out.
Thanks for this good tutorial. I want to setup a livestream/recording system. Can I connect this switcher to the same laptop for control and use it to livestream/record? I intend to use a Windows laptop so I am thinking about an SDI to USB converter to send the signal from Atem switcher to the control laptop and livestream. Please help me out here? Can this work? Thanks in advance
Hi. The best solution that I have found so far is the Blackmagic Web Presenter. This allows you to take a HDMI or SDI video signal into your computer as a USB Camera. Once your computer sees your video source as a USB Camera you can record it with QuickTime or push it our as a web stream on what ever platform you choose.
@@legionavs okay thanks. Does that mean I can connect SDI camera to the presenter and output USB to the computer for recording/streaming? Please can you point me to such device? Thanks once more
@@tataisaac9994 That's correct. The SDI camera is connected to the SDI In on the presenter and outputs from USB. This allows your computer to recognize whatever is plugged into the presenter as a webcam allowing you to use the camera for streaming or recording. The Blackmagic Web Presenter is available on Blackmagic's website. Hope this helps!
hello. How can I connect a computer by HDMI input. I have tried but it did not show up anywhere. I change the resolution screen but it did not work. I do not find where to change from sdi to HDMI. COuld you help me?
What I have learned... I've changed the 'System Setting' within the unit to 1080p59.94 (though I prefer 29.97). Since the unit doesn't have built in scallers, the cameras and everything coming into the switcher must be at the same size (1080) and matching framerate (59.94). The computer in our case is dictating that setting on the switcher. When the Cameras were 29.97, I had the computer going through a scaller to compensate for the switcher itself not having a scaller to accept a difference in the input). I used the Decimator MX-HD scaler with my Macbook Pro 13" mid 2012. After a few days, I chose to take the approach that I mentioned as a solution for you.... so again, change to 1080p59.94, plug in the computer. Boom. ** BONUS NOTE : If you want the switcher to see your monitor as A SECOND DISPLAY, so you have more real estate, use a BMD BiDirectional converter, plug in your HDMI from the laptop to the IN on the converter, Send your HDMI OUT into a desktop monitor, and use the converters SDI OUT to go into the ATEM switcher (into SDI 5, 6, 7, or 8) This way, you can set up the monitors to play content full screen... and... be able to SEE YOUR COMPUTER CONTENT LARGER on your desktop monitor instead of relying on seeing the feed on the small Multiview screen *** Glad to help !!!! - Brian Kyle Atkins
HELP! We just got this switcher. Our sound is coming from a Allen and Heatch board to the XLRs in the back of the switcher. We have sound in the headphones on the switcher. We have sound on the mixer, we have sound showing in our program feed on the multiview. BUT, when we stream live, the live video has no sound. We are running from the Program SDI in the back of the switcher, to the Boxcast(our live stream service). We have a convertor that makes the SDI feed an HDMI feed so we can plug it into the boxcast. The boxcast is fine...tested without the switcher. We do not use the individual cameras as the sound source, just the feed from the board. We have been troubleshooting for days now. What are we missing?
Hi Scott, It sounds like your SDI to HDMI converter is the issue. I would suggest using a different converter as a test. We use Decimators or DAC 70's which allow us to control if the audio is being sent inline.
hello how are you all, good box is quite good, now I have an ATEM blackmagie STUDIO that does not work the multiviwe that can help me to repair it I am from Santo Domingo, Dominican Republic, if you know I can send the equipment for its repair, I will be grateful from all of you, I repeat my BLACKMAGIE ATEM STUDIO ITS MULTIVIWE OUTPUT IS NOT WORKING CORRECTLY THANK YOU ALL
Hi there. The IP info that we reference in the video are the default addresses for this model device. We simply typed them out on a label to have the info readily available for us. The default info is as follows. Computer Settings : IP 192.168.10.10 Subnet Mask 255.255.255.0 Device IP 192.168.10.240
ya sabemos que no podemos recomendar el equipo, de ahora en adelante cuando me pregunten en santo domingo, republica dominicana por los productos de blackmagie le dire no lo compren que tienen problemas de carga no tiene protecion y mas no tiene reparacion en santo domingo y estados unidos....LES DIRE NO LO COMPREN TIENEN PROBLEMAS DE VOLTAJES
This is a great video. I have to apologize for my short viewing time - you answered my question at about 2 minutes in. Thank you.
Where did you get the travel case for this model?
I don't know the specific case they used but it looks like a typical Pelican or Nanuk brand case. Just get the measurements of all the gear you want to case in the case and then get a case that is about 2" or so larger in all dimensions. They can come with cubed tear out foam so you can customize them for your gear.
Thank You!! 🙏🏻
Yes, how do I get an image to feed from another monitor to the switcher, that is not hooked to the main computer but is connected to the projectors for in house? I want to put up the slide for ways to give from ppt .Is there a way to run an hdmi cable from that monitor to the switcher?
Hi
How do I connect to streaming software?
Do I need a capture card ?
how can we get additional PGM output through 4 SDI outputs?
Is it possible to punch from source to source directly? I host a twice channel the least amount of key presses the better. Thank you
It is! Selecting the source from the top section will punch immediately to that source instead of having to select a standby source and switching to it.
How can i connect three (3) that have different setting? Can you help me to connect my ATEM Studio to my PC Windows? I am having difficulty
I would like to clarify about the SDI output 5-8. Can it output a specific camera input?
Hi Esteves, outputs 5-8 are talkback program outputs, so they only send the program feed. You have one aux output which you can send any source you would like to. I hope this helps! Useful link: www.blackmagicdesign.com/products/atemtelevisionstudio/techspecs/W-APS-08
블랙매직디자인 스위쳐 ATEM Television Studio HD
믹서에서 카메라신호와 마이크 신호 받아서 프리뷰로햐서 자막기에서들어가서 hdmi해서 캡처보드 보냐는대요.
믹서에서 멀티뷰 말고 출력단자가 4개sdi단자있는대 바로 출력하면 자막기에서 자막 입혀서 나가서 캡처보드 / 자마막기에서 자막 입혀서 믹서에 4개 sdi 단자로 출력 가능할까요?
Plz Can you help me to connect my ATEM Studio to my PC Windows ?
What size is the adapter for the Michele on the left side of the black magic design when looking at it and where I can I find it?
mic not Michele
I hava a 2013 Mac book pro how I can connect / configure the black item 4k studios to my laptop ,knowing this MacBook docent have internet cable connection
one quick question for you, why did you use Belkin USB C LAN? What if I don't have any Belkin USB C land programmed in my computer. And also, do I need to use a compatible computer that will configure a signal of the atem software control?
Hi there! We selected Belkin USB C LAN because that's the LAN adaptor we use. Realistically, you can use any ethernet to USB-C LAN adaptor and select that instead.
I'm not sure what you mean about configuring the signal of the ATEM Software Control though.
Hello! It has PiP function?
Thanks for the video. My system still don't get to detect atem switcher. I got the swutcher software perfectly but for my program out for propresenter I'm have big issue connecting to my pc. I detects the pc but blank
How about some more teachings, I think you good at this. thanks
More are in the works! Check back soon!
How about using an SDI switcher
Is possible switch off sdi audio from camaras and use only the XLR audio?
Yes that is possible. If you click into the audio menu at the bottom you have access to a digital audio board. In that menu you are able to toggle on and off audio from each individual audio and video source.
Why is it emphasized to "NEVER USE THE MASTER COMPUTER AS A VIDEO SOURCE?" If I wanted to use OBS virtual cam as a video source, on the same computer as is being used as a master computer, this can't be accomplished or is it not advised?
Can you record each individual video I puts (iso) or can you only control your program feed?
With this particular piece of equipment you are unable to record internally. You are able to attach separate recorder. If that is a route that you are looking to go then you are able to record the program mix (this loops out of the top SDI) as well as 1 of your other inputs. The latter can be assigned and pushed out in the 1 aux out.
Thanks for this good tutorial.
I want to setup a livestream/recording system.
Can I connect this switcher to the same laptop for control and use it to livestream/record?
I intend to use a Windows laptop so I am thinking about an SDI to USB converter to send the signal from Atem switcher to the control laptop and livestream.
Please help me out here?
Can this work?
Thanks in advance
Hi. The best solution that I have found so far is the Blackmagic Web Presenter. This allows you to take a HDMI or SDI video signal into your computer as a USB Camera. Once your computer sees your video source as a USB Camera you can record it with QuickTime or push it our as a web stream on what ever platform you choose.
@@legionavs okay thanks.
Does that mean I can connect SDI camera to the presenter and output USB to the computer for recording/streaming?
Please can you point me to such device?
Thanks once more
@@tataisaac9994 That's correct. The SDI camera is connected to the SDI In on the presenter and outputs from USB. This allows your computer to recognize whatever is plugged into the presenter as a webcam allowing you to use the camera for streaming or recording.
The Blackmagic Web Presenter is available on Blackmagic's website.
Hope this helps!
Okay thanks a lot.
Very helpful
What are the steps for a windows laptop?
hello. How can I connect a computer by HDMI input. I have tried but it did not show up anywhere. I change the resolution screen but it did not work. I do not find where to change from sdi to HDMI. COuld you help me?
What I have learned... I've changed the 'System Setting' within the unit to 1080p59.94 (though I prefer 29.97). Since the unit doesn't have built in scallers, the cameras and everything coming into the switcher must be at the same size (1080) and matching framerate (59.94). The computer in our case is dictating that setting on the switcher. When the Cameras were 29.97, I had the computer going through a scaller to compensate for the switcher itself not having a scaller to accept a difference in the input). I used the Decimator MX-HD scaler with my Macbook Pro 13" mid 2012. After a few days, I chose to take the approach that I mentioned as a solution for you.... so again, change to 1080p59.94, plug in the computer. Boom. ** BONUS NOTE : If you want the switcher to see your monitor as A SECOND DISPLAY, so you have more real estate, use a BMD BiDirectional converter, plug in your HDMI from the laptop to the IN on the converter, Send your HDMI OUT into a desktop monitor, and use the converters SDI OUT to go into the ATEM switcher (into SDI 5, 6, 7, or 8) This way, you can set up the monitors to play content full screen... and... be able to SEE YOUR COMPUTER CONTENT LARGER on your desktop monitor instead of relying on seeing the feed on the small Multiview screen *** Glad to help !!!! - Brian Kyle Atkins
HELP! We just got this switcher. Our sound is coming from a Allen and Heatch board to the XLRs in the back of the switcher. We have sound in the headphones on the switcher. We have sound on the mixer, we have sound showing in our program feed on the multiview. BUT, when we stream live, the live video has no sound. We are running from the Program SDI in the back of the switcher, to the Boxcast(our live stream service). We have a convertor that makes the SDI feed an HDMI feed so we can plug it into the boxcast.
The boxcast is fine...tested without the switcher. We do not use the individual cameras as the sound source, just the feed from the board. We have been troubleshooting for days now. What are we missing?
Hi Scott,
It sounds like your SDI to HDMI converter is the issue. I would suggest using a different converter as a test. We use Decimators or DAC 70's which allow us to control if the audio is being sent inline.
Thanks alot
hello how are you all, good box is quite good, now I have an ATEM blackmagie STUDIO that does not work the multiviwe that can help me to repair it I am from Santo Domingo, Dominican Republic, if you know I can send the equipment for its repair, I will be grateful from all of you, I repeat my BLACKMAGIE ATEM STUDIO ITS MULTIVIWE OUTPUT IS NOT WORKING CORRECTLY THANK YOU ALL
How do I do a picture in Picture?
You would need to do a Supersource for Picture in Picture. On the right hand side you can select Supersource and tweak your settings there.
no IP info on our ATEM
Hi there. The IP info that we reference in the video are the default addresses for this model device. We simply typed them out on a label to have the info readily available for us. The default info is as follows. Computer Settings : IP 192.168.10.10 Subnet Mask 255.255.255.0 Device IP 192.168.10.240
Hi anyone can help! How to change ATEM ip address
Thank you very match 😊
where the software???
USB-C LAN ?? I don't have this..
You can get them for pretty cheap online!
It's not working for me
Salut
1:15 ethernet
ya sabemos que no podemos recomendar el equipo, de ahora en adelante cuando me pregunten en santo domingo, republica dominicana por los productos de blackmagie le dire no lo compren que tienen problemas de carga no tiene protecion y mas no tiene reparacion en santo domingo y estados unidos....LES DIRE NO LO COMPREN TIENEN PROBLEMAS DE VOLTAJES
too bad there is this "music" running under your voice.
Price is India