Thank you both so much!! You saved me a lot of money with this fix! I am happy I found this video and I took the time to try this, I was feeling helpless! It took me some time to finally decide to try this and I am so happy I did! Thank you!
I really appreciate this post. I have done most things to figure out this paper jam, and my problem still exists. The front screen says paper remains inside because it’s placed sideways . Place a4 Size of paper In the rear paper slot. Prayers continue to remove the paper inside. I have taken apart the rear of the machine and it will not let me load a piece of paper because it gets jammed up in this gray piece of plastic that looks to be dislodged. I have a video, but I’m not sure if I can upload it to us. Any help would be greatly appreciated.
im getting a phantom jam for a 7210 i checked all sensors. it has no problem when i print letter in normal mode. but as soon as i change those print settings i goes into phantom paper jam. any help would be appreciated
Where are you located? I have a stubborn paper jam with my epson et 8550. I use it for dtf printing and just started dealing with a paper jam about 2 weeks ago now that I haven't been able to resolve
Okay, i fixed the strip and also the black clip on the left had popped off so I reattached that and it's tracking perfectly again but not printing at all and no error message. Not a spec of ink. It goes thru all the motions of printing but nothing. Help!
Thanks so much for your question and for subscribing to my channel! Your support really keeps me motivated, and every subscriber helps me get closer to that 100k milestone. If you ever need a faster response, you can email me at support@bchtechnologies.com or post your question on any of my videos-I aim to reply within 48 hours, though occasionally the backlog can cause slight delays. If your ET-15000 isn’t printing at all despite going through the motions, there are a few things you should check. Start by ensuring the ink tanks or cartridges are full and that the lines are properly primed. Air bubbles in the lines can block ink flow, especially after reassembling components like the strip or clip. Run a nozzle check and cleaning cycle to rule out clogs in the printhead, and inspect the capping station to ensure it’s sealing properly with the printhead. Additionally, check the F1 fuse on the mainboard. A blown fuse can prevent the printhead from receiving power, leading to no ink output. If the fuse is intact and the issue persists, the mainboard may need professional inspection or repair. At this stage, it’s often best to consult a technician to diagnose and fix any deeper electrical issues. Let me know how it goes! I’m here to help if you have more questions.
Hey! So I have the ET-15000 like yours and it sat for a few months unplugged but now it refuses to turn on. Everything lights up, Epson logo pops up and then it goes to a wavy blue screen.. It never moves after that, Crazy thing is I am a certified IT tech and this has stumped me. I don't know anyone who personally owns one so.. here I am YT help me out lol. Please any ideas?
Wtf I was looking at those beautiful tattoo the whole time. Lol Btw Kevin sorry I have a question that is not related to inkjet printers. It is about laser printers. Can you tell me if all laser toners are the same? Like as you said one day that all inkjet ink are basically either dye ink or pigment ink. It is just they are sold at different prices by printer models. Is it the same case in laser toners? I see they sell HP & Canon toners at different prices
Thank you both so much!! You saved me a lot of money with this fix! I am happy I found this video and I took the time to try this, I was feeling helpless! It took me some time to finally decide to try this and I am so happy I did! Thank you!
You went from feeling helpless to a DIY champion! Just think of all the money you saved-enough for a nice pizza party to celebrate!
I really appreciate this post. I have done most things to figure out this paper jam, and my problem still exists. The front screen says paper remains inside because it’s placed sideways . Place a4 Size of paper In the rear paper slot. Prayers continue to remove the paper inside. I have taken apart the rear of the machine and it will not let me load a piece of paper because it gets jammed up in this gray piece of plastic that looks to be dislodged. I have a video, but I’m not sure if I can upload it to us. Any help would be greatly appreciated.
I think and hope this is what is going on :). Mine does not seem to be threaded through at all, thank you for sharing and helping us all!
It seems like your thread is playing hide-and-seek! Don't worry-we'll find it and get everything threaded smoothly!
im getting a phantom jam for a 7210 i checked all sensors. it has no problem when i print letter in normal mode. but as soon as i change those print settings i goes into phantom paper jam. any help would be appreciated
I’m having this problem with this printer. I live 45 min from greensboro. Could I bring it to you to fix?
Can you show me this on epson xp 15000? My print head is doing the same thing
I have a 031006 error code on my epson 8550. I did take the rollers out, but I didn't put any ink in it. Are you available for repair?
So did the printer needed a new encoder strip, a cleaned encoder strip, or did it just come lose?
cleaned strip
@@piwin289011how do you clean them, soft cloth with alcohol?
Where are you located? I have a stubborn paper jam with my epson et 8550. I use it for dtf printing and just started dealing with a paper jam about 2 weeks ago now that I haven't been able to resolve
Greensboro, North Carolina
@@BCHTechnologies so no help??
Okay, i fixed the strip and also the black clip on the left had popped off so I reattached that and it's tracking perfectly again but not printing at all and no error message. Not a spec of ink. It goes thru all the motions of printing but nothing. Help!
Thanks so much for your question and for subscribing to my channel! Your support really keeps me motivated, and every subscriber helps me get closer to that 100k milestone. If you ever need a faster response, you can email me at support@bchtechnologies.com or post your question on any of my videos-I aim to reply within 48 hours, though occasionally the backlog can cause slight delays.
If your ET-15000 isn’t printing at all despite going through the motions, there are a few things you should check. Start by ensuring the ink tanks or cartridges are full and that the lines are properly primed. Air bubbles in the lines can block ink flow, especially after reassembling components like the strip or clip. Run a nozzle check and cleaning cycle to rule out clogs in the printhead, and inspect the capping station to ensure it’s sealing properly with the printhead.
Additionally, check the F1 fuse on the mainboard. A blown fuse can prevent the printhead from receiving power, leading to no ink output. If the fuse is intact and the issue persists, the mainboard may need professional inspection or repair. At this stage, it’s often best to consult a technician to diagnose and fix any deeper electrical issues.
Let me know how it goes! I’m here to help if you have more questions.
Hey! So I have the ET-15000 like yours and it sat for a few months unplugged but now it refuses to turn on. Everything lights up, Epson logo pops up and then it goes to a wavy blue screen.. It never moves after that, Crazy thing is I am a certified IT tech and this has stumped me. I don't know anyone who personally owns one so.. here I am YT help me out lol. Please any ideas?
oh I heard the second time i watched Thanks!
Wtf I was looking at those beautiful tattoo the whole time. Lol
Btw Kevin sorry I have a question that is not related to inkjet printers. It is about laser printers. Can you tell me if all laser toners are the same? Like as you said one day that all inkjet ink are basically either dye ink or pigment ink. It is just they are sold at different prices by printer models. Is it the same case in laser toners? I see they sell HP & Canon toners at different prices