How to fix EPSON Ecotank 2850 Paper Feed and Jam Problems
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2024
- If your EPSON Ecotank printer keeps jamming or having paper feed issues then this fix may work for you, thanks for watching! If you have any questions please ask them below.
The cleaning product I am using is AF Platenclene (link below) I highly recommend it, be really careful when using isopropanol or other cleaning solutions they can damage components and cause an even bigger problem I speak from experience.
amzn.to/3ubX2Ni
#epson #epsonecotank - แนวปฏิบัติและการใช้ชีวิต
I use another model of this printer but the tip fixed it. I am so happy been trying for so long to fix it!
I learned the back part came off on my ET-2800! I clicked a little white plactic part back into place and now it works again, thanks.
How'd you get if off? I have the same model. Thanks in advance.
@@lindabradford9591did you figure it out?
@@shanna-kayepowell8360 no
I had a little piece stuck and took needle nose pliers in the back where the paper goes and got the piece out, cause I saw no way to remove the back cover. Hope you can help in case it happens again.
@@lindabradford9591 I found out today...the top can come off completely. First, you have to pull out and up the display screen, then pull down another part under(the part with the serial number). Lift gently the display screen and it will lift the top to a small degree. To the left side where the power button is, there is a little sliding part you have to slide it through a little maze thing. Then it will lift completely. Now towards the back, there are two parts you squeeze together to snap out the top. Lol...no screws involve just snap snap....while doing that I accidentally temporarily fixed my feeding issue. The feeding ball at the bottom fell out. I somehow wondered if I can print without it, tried it and it worked, only downside, can only fit one paper in at a time. I saw a video showing how to turn over the printer and put it back in...I'll do that some other time. Right now I have work to do and can't risk it not working again
Thank you for posting this, I appreciate you! Going to try this on my printer❤
I wa so relieved when you showed me how to remove the back plate… I had cut my thumb trying to remove my jammed paper
Thank you!!!! a video that was actually helpful!!! my printer is working again it was the little switch for me but now i know how to clean the rollers
Never knew there was a door back there, I will try it as soon as I get back to my desk
It worked i just simply dry-cleaned it ! Thank u
Thanks! I didn’t even have to go this far with cleaning it- it turns out something fell inside and kept misaligning the paper while being fed through 😑 I thought the new Epson eco tank et-2850 was junK before I even got to use it.
THANKS!!! Finally something worked!
Thanks for posting this. Going to try this.
Many thanks for sharing. I've had this problem for a few weeks now and wondered if there was a solution? Will try this, seems straightforward enough. Cheers.
you can try what i said in the video and/or different paper if possible.
Thank you this worked!
This video saved me , i never Knew there was a bck panel, thank you
GREAT JOB! THANKS FOR THE TIP HOW YOU TAUGHT TO OPEN THE BACK OF THE PRINTER WHERE I GOT MY JAMMED PAPER WHICH I WASTE LOTS OF PAPER THOUGHT THAT THE JAMMED PAPEPR WAS INSIDE BUT NOTHING INSIDE IT WAS THEN I SAW THAT ITS AT THE BACK WHERE THE PAPER JAM..THANK YOU AND HELP ME LOT!!👍😍🥰
You're welcome!
Me too.
What alcohol dilution do you recommend?
YOU ARE THE BEST!!
😄Very helpfull video
I’m having issues with it pulling the paper in the right corner is catching and it’s getting stuck or pulling the paper in wonky. What can it be
I can't remove the back part on my et-2726, I don't know what to do with that phantom paper jam... Can someone help please
Thank you, Sir!
test run?
Would the inside rollers be the cause when the paper feed stops half way into the feeder?
I had the same issue and I repair it a few hours ago after disassemble the device 6 times...
The first time I found a torn paper that was 2x2cm from last year (I recognize the document).
Then a scan error appeared, I disassemble again and failed but that allows me to understand how to disassemble the upper part of the device entirely.
My problem was that my paper can't slide so the last time, I disassemble the whole thing and I really check all the little hole where the paper should slide and I found my bunny's pellet (3mm) in the middle hole...
I took it with a barbecue stick with a double sided adhesive paper at the end.
I used "Kevin at bch" channel with the video named "100016 scanner error" (there are 2 videos I watched both of them).
If you don't have warranty like me anymore, I truly recommend to try this.
And make a camera record while you disassemble so that you know the place of every piece.
I recommend to be with someone to help because I couldn't do it on my own.
I hope this will help !
When cleaning a small expansion spring came loose from below bottom roller does anyone know where this attaches to
i think i have the same issue! did u end up fixing it?
I had to take back panel off to clear paper jam. Now I can't get the back on properly because it won't feed paper at all. Is there some trick to aligning the back panel? Thanks
the part that you squeeze two bits together??
Get a good look at the backside of it it has tracks the gears on the side sit on, it goes in pretty straight
I have a Epson ET-15000 how do you take the paper tray off of the rear feed to clean those rollers? Thank You
I would refer to the epson website and user manuals as that printer is quite expensive you wouldn't want to break anything and I can't advise properly as I don't have that model unfortunately.
Thank You
@@DanielJohnHowTo
Sir high quality me print nhi kr sir is pr video up load kr dena sir printer ka sansar kharb bta raha h l 4260 Epson sir please
i think a tension spring fell out when i tried to clean it 😳😳 how do i fix this? my paper won’t roll
Omg same thing happened to me!
Very helpful. I have this printer and also a ET2600. Would you advise the same procedure for that as well?
I don't mean to be critical but you need a stronger microphone I can't hear you and it seems to me a lot of other people are the same way looks like a good video we sure could help have help
turn volume up, filming inside it should be fine
Would that cause my printer to print crooked ? My printer is printing crooked !
check the paper is seated right and guidelines are where they need to be.
I have the same crooked paper problem! Despite it being tightly within the blue tabs it drags one side of the paper down and feeds it through at an angle and it folds the corner when it feeds and doesn’t print properly. Printer is 18 months old ET3800 and done 2 whole sets of ink. Thanks for the back panel tip, I will take it off and report back …
I have had my printer for 2 weeks and this problem happens waaaay too often. I want to like this printer but I just can't. I'm so desperate for a printer cuz my HP is requiring $100 ink refills
if you do a lot of printing and have paper jams it could be the paper because I had the same issue
Please use a stronger microphone.
What happens if you do this and it DOESNT help? Says paper jam or foreign object and theres no paper jam- it was happily printing away and then just STOPPED. I have one day left to send it back and i know its not broken... wits end. SOS
if you have tried everything, then it could just be faulty.
Man, someone should reinvent printers, this is dino technology
CAN'T HEAR YOU
turn the volume up