Gate Sag Lift Kit Installation

National Hardware Anti-Sag Gate:
Authorized Replacement for Stanley Hardware Stock #S760-828
Designed to prevent or correct gate sag
Kit includes: top and bottom corner bracket, rope clips, cable, turnbuckle and mounting screws
Up to 7.5 Ft. diagonal bracing
Instructions included to make installation easy
AMAZON: www.amazon.com/dp/B0009SNY1U?...

[@ChrisAnnasMom]

Thank you! The kit I bought has very poor instructions. You're a life saver.

[@BoilerDan1]

You’re welcome 👍

[@HeisenbergSC]

Thank you! I was struggling with this!

[@BoilerDan1]

You’re welcome. Note: from time to time you’ll need to adjust the tension either slightly more or slightly less. It seems like the weather plays a role. Winter definitely needs it a little tighter. It’s simple, just hold the hook with pliers and use another to tighten/lossen the elongated bolt thingy…… maybe I should do a follow up video 😂👍

[@kyleigh2643]

Thanks for posting this! I need to do that to both my Gates on my deck

[@BoilerDan1]

I was amazed how well it worked and it really was easy to install.

[@ufaxpyro4200]

Nice 👍 these works like a charm thanks for the video !

[@BoilerDan1]

I've adjusted it a couple of times, and it is working great! Thanks for watching and taking the time to comment! 😃

[@claudiacanales2662]

I wonder if this would work on a 6 foot gate?

[@BoilerDan1]

Yes, I think it would. It wasn’t expensive, so I’d give it a try.
Thanks for watching 👍

[@yimb8437]

Remember that you will need to remove the gate to install that bottom clip.

[@BoilerDan1]

Point well made. Fortunately it is bent around the bottom so the pressure of the cable is holding mine in place.

[@threeptt]

I've got this kit to raise my sagging shed door, would the turnbuckle be best placed nearest the hinges or on the opposite end or doesn't it matter ? (I'm fixing this unit on the inside of the door obviously)

[@BoilerDan1]

Mine is opposite side of the hinges and it continues to work great.
I have adjusted once or twice giving it a little more lift.
I think the important thing is that it’s hooked to the solid frame of the gate / door. Mine is one the 2x4 cross framing boards. I’d think if your door has good wood, it’ll work fine.
Thanks for watching 👍