hello, passat cc 2011 (new model dsg shifter) 6 gears, it gets stuck when I put it from N to D and I have to pull harder. Then he recovers. Do you think it's from the gearbox selector or mechatronic?
Hello i have golf mk6 tsi with 7 gear dsg the gear indication disappeared from the dashboard. The gear drives normally but can't see which gear it it in while driving vcds shows error P0820 how can I fix it pls
You need to hook a VCDS tool and check the measuring blocks . It may be a micro - switch that's the culprit. If in case you are not able to do the repair procedure you might have to replace the selector unit . Remember it's a software + hardware fix so you need all tools & proper research before you proceed.
@@ShreeshTripathi hello bro I have vcds how to test micro switch with vcds I checked the gearbox it's working properly and from vcds I can see when I change gear but not on the cluster how to test the switch from vcds
There will be channel or list option you need to select for micro switch and with vcds connected you will have to check for response in software when hardware command you give it should take. If not you can identify component failures.
Shift lock solenoid maybe. Get your vehicle scanned for fault codes in Transmission Control Unit (TCU). Share the code with me so I can help you understand the issue.
🔥🔥
hello, passat cc 2011 (new model dsg shifter) 6 gears, it gets stuck when I put it from N to D and I have to pull harder. Then he recovers. Do you think it's from the gearbox selector or mechatronic?
Likely the selector. Mechatronic has got nothing to do with it.
Hello i have golf mk6 tsi with 7 gear dsg the gear indication disappeared from the dashboard. The gear drives normally but can't see which gear it it in while driving vcds shows error P0820 how can I fix it pls
You need to hook a VCDS tool and check the measuring blocks . It may be a micro - switch that's the culprit. If in case you are not able to do the repair procedure you might have to replace the selector unit . Remember it's a software + hardware fix so you need all tools & proper research before you proceed.
@@ShreeshTripathi hello bro I have vcds how to test micro switch with vcds I checked the gearbox it's working properly and from vcds I can see when I change gear but not on the cluster how to test the switch from vcds
There will be channel or list option you need to select for micro switch and with vcds connected you will have to check for response in software when hardware command you give it should take. If not you can identify component failures.
@@ShreeshTripathi hardware response is so fast as long as I change gear directly it shows in vcds that gear har changed there is no hesitation
Check parameters that suggest faults
Brother are u from bhopal?
Yes sir
Bro meri rapid dsg me ignition off k baad key D mode me he bahar nikal jati hai yeh kya problem ho skti hai
Shift lock solenoid maybe. Get your vehicle scanned for fault codes in Transmission Control Unit (TCU). Share the code with me so I can help you understand the issue.
Bhaiya Gypsy petrol pe start nai hori lekin gas pe hori h kya dikkat hogi please help
fuel pump perhaps could be fault with emulator switch
@@ShreeshTripathi emulator switch kaha hota h bhaiya ?
Fuel pump petrol dera h aur pressure bhi nai h
@@ShreeshTripathi bhaiya please reply
Pressure nahi de raha to change fuel pump with filter
Bhaiya gypsy reverse light ka switch kaha hota h
Gearbox me upar side
@@ShreeshTripathi bhaiya use access kese kr skte
Neche ghus ke somehow 😁