I just got an MJJC today and right out of the box with the stock 1.25mm orifice with my 3100psi 2.4gpm gas PW with a 100ml soap to 900ml water dilution I got an absolute youtube grade snow foam show. Im absolutely stunned that the same dilution I poured out of my old cheap foam cannon straight into the MJJC went from a runny embarrassing mess to absolutely stuck not moving foam to my vehicle.
I picked one up, only issue I have is I run out of soap before I finish my whole truck! I have the same truck you have. I’m using 4oz the rest water. Any tips?
Hey man. The exact link is in the description of the video. Just in case you can’t find it, here it is.👇🏻 www.mjjc.com/products/foam-cannon-pro-1-4_quick_connector/?ref=AUTOHEADZ
Have a question on what is your dilution ratio with regards to water to solution and if you used distilled water? I have the MJCC Pro foam cannon 2 and the foam is coming out runny and not thick whatsoever… Thank You
What is the dilution ration being used to the thick foam? I have the MJCC foam cannon Pro 2 and mine comes out runny using 2 oz product and 16 oz of warm distilled water. Thank You
So I add about 3-4oz into 30oz/900ml MJJC foam cannon. It’s a little bit of a science getting everything right. A few more questions. What size orifice are you using? Is the soap dispenser fully open? What kind of soap?
This jerry rigged solution to the weight problem looks like it will work for me. :) Just tied a fishing lead weight nice and tight to the end of the tube using some 20 lb fireline ... seems to do the job for me. I'd much prefer the MJCC canon but I JUST got a different one as an Xmas gift (can't really return it) so I'll make do.
🫧 🧼 Link for MJJC foam cannon 🧼🫧
www.mjjc.com/products/foam-cannon-pro-1-4_quick_connector/?ref=AUTOHEADZ
Use Code - “AUTOHEADZ” for 10% Off!
Amazing foam ! Amazing build quality ! BEST foam cannon on the market....by far !
I just got an MJJC today and right out of the box with the stock 1.25mm orifice with my 3100psi 2.4gpm gas PW with a 100ml soap to 900ml water dilution I got an absolute youtube grade snow foam show. Im absolutely stunned that the same dilution I poured out of my old cheap foam cannon straight into the MJJC went from a runny embarrassing mess to absolutely stuck not moving foam to my vehicle.
Isn’t it amazing. There really isn’t much competition for this foam cannon.
I picked one up, only issue I have is I run out of soap before I finish my whole truck! I have the same truck you have. I’m using 4oz the rest water. Any tips?
Which specific foam Canon version goes with the setup you're using?
Hey man. The exact link is in the description of the video.
Just in case you can’t find it, here it is.👇🏻
www.mjjc.com/products/foam-cannon-pro-1-4_quick_connector/?ref=AUTOHEADZ
Can you use smaller neck bottle with your MJJC Foam cannon pro v2 ?. I think that they removed the dual cap feature on the latest version
I don’t think this is possible without some serious modification to the cannon.
@@AutoHeadz it was a feature in previous version of v2. Now they remove it..
It's easy. Just change the cap on MJJC foam cannon pro v2.
Have a question on what is your dilution ratio with regards to water to solution and if you used distilled water? I have the MJCC Pro foam cannon 2 and the foam is coming out runny and not thick whatsoever… Thank You
@@tomgomez5807 what psi pressure washer do you have?
Great vid! Thank you for the detailed comparison
Absolutely! Thank you for the great comment.
What is the dilution ration being used to the thick foam?
I have the MJCC foam cannon Pro 2 and mine comes out runny using 2 oz product and 16 oz of warm distilled water. Thank You
So I add about 3-4oz into 30oz/900ml MJJC foam cannon.
It’s a little bit of a science getting everything right.
A few more questions.
What size orifice are you using?
Is the soap dispenser fully open?
What kind of soap?
Orifice is 1.25, not sure what you mean regarding soap dispenser and soap is Chemical Guys Watermelon. Thanks, Tom
@@tomgomez5807probably need the 1.1 orifice.
Sweet product.
This jerry rigged solution to the weight problem looks like it will work for me. :) Just tied a fishing lead weight nice and tight to the end of the tube using some 20 lb fireline ... seems to do the job for me. I'd much prefer the MJCC canon but I JUST got a different one as an Xmas gift (can't really return it) so I'll make do.
A true innovator! I like it.
Stucco? It’s what we have on the houses here lol
THATS IT!!! Hahah thanks man. Lol
I dont know why, in a world where MJJC exists, people still buy MTM foam canons.
Have you seen the new one yet? BEST PRESSURE WASHER UPGRADES FOR DETAILING CARS | Perfect foam cannon setup!
th-cam.com/video/oXWMsB3zdtE/w-d-xo.html