Always nice to see a well presented video on modding a controller 😎 At 7.40 them two little tabs, if you position your hand to give a bit leverages on the cover, it'll pop the back off so much easier, hate to imagine how many times I've done these controllers and hopeful helped many people on the way 😁
yea i was going too buy the ps offical elite controller but extreamrate is cool i got one for my series x controller too i gave my default controller back buttons and better grips . now i just got my ps5 one as well .
When I done one of mine …if you place a piece of tape on the back buttons that fall out it will hold them into place …… also if you are not soldering you don’t need to remove those 2 screws on the ends by the rumble
Thanks for the kind words! I admit it can seem daunting but what you actually do is pretty easy. It's when you want to solder the extra parts to the controller that it takes REAL know how. This is just following along!
I play claw and it feels fine. At first, your hands get a little sorr because its not used to clicking button like that, but once you’re used to it, theres no pain, at least for me
Yes but it'll require some soldering and a few other tools like a hot glue gun. You want to buy remapper flex board, kynar wire 30awg, tact buttons and some caps.
Not sure which dock you're talking about? The official charging dock? Most likely not but this company does sell an extender for charging. amzn.to/3NsfrPW
is the extremerate kit fine to use on mw3. ik its just back buttons, and this is a stupid question but since u install it yourself im just making sure they dont thnk its a mod or something. So can u use this ban free on call of duty. I ordered them and i wanna start using them but i just want to double check all there stuff is fine with the new game
I honestly couldn't tell you but it's shouldn't because it's only adding buttons like a regular pro controller. There's no extra features beyond that. It seems many people use it for CoD based on looking at the extreme rate subreddit.
ive had one for 2 months now but now im having to click it more then once for it to register or work but it works fine when not playing a game has anyone els have this problem
I use the same spider man controller i have been searching for a video with my same controller i need more red in the controller but i dont like the red grip in the starting but i dont mind black can you tell me if rise 2 with 2 back buttons is better or 4 is better
Woah! I don't know what that could be but luckily ExtremeRate has a full support page to help. Check it out here: extremerate.com/pages/extremerate-ps5-controller-rise-remap-kit-faqs#:~:text=If%20the%20red%20light%20flashes,the%20Remap%20PCB%20is%20broken.
man for the back two buttons that you attach at the end.. im having the hardest time snapping the bottom part in.. how the hell did you do it you didnt even show
I had trouble many times yesterday too with trying to snap the back buttons onto the backcase until i realized at 20:30 that i didn't put that board correctly slotted there so the lower part of the board was kinda elevated up from its place and i screwed it in and that was how i could not snap the back buttons in. I fixed it and it works
DO NOT BUY THIS KIT. mine came without the adhesive at 14:18, it’s impossible to do without. Now my controller is completely ruined as well. DONT BUY THIS THEY DONT QUALITY CONTROL CHECK ANYTHING
Always nice to see a well presented video on modding a controller 😎
At 7.40 them two little tabs, if you position your hand to give a bit leverages on the cover, it'll pop the back off so much easier, hate to imagine how many times I've done these controllers and hopeful helped many people on the way 😁
I used the same Spider-Man controller. Thanks for walking me through the process. It works perfectly
Love to hear it! Enjoy. It's been my go to cause it looks so awesome lol
So i just install it and ready to go, no app
A very good, clear instruction video, thanks pal
Great video! Keep it up. 🎉
I appreciate you 🫡
yea i was going too buy the ps offical elite controller but extreamrate is cool i got one for my series x controller too i gave my default controller back buttons and better grips . now i just got my ps5 one as well .
When I done one of mine …if you place a piece of tape on the back buttons that fall out it will hold them into place …… also if you are not soldering you don’t need to remove those 2 screws on the ends by the rumble
I did everything like you did but mine isn’t working
This seems like such a cool channel though i am a bit scared to mod my controller so extensively
Thanks for the kind words!
I admit it can seem daunting but what you actually do is pretty easy.
It's when you want to solder the extra parts to the controller that it takes REAL know how.
This is just following along!
Thx , i did the same and it work for me 030
Love to hear it!
I just really enjoy the added functionality and hope you do as well 👍
@@ALinctotheGear any idea how i désactive x and o , in controller 🎮 i want just use the paddle
thank you brother
Did they make new revisions? I don't remember it being this easy, before we had to cut shit and use ribbon connectors that were provided with the kit
The older version was a bit harder and before that probably even harder.
This is really easy as long as you follow the steps.
That claw grip is an optimal way but damn is it very uncomfortable I much prefer having back buttons cause my hands feel better w them lol😭
been playing claw 3 years now and the pain and uncomfortable feeling never leaves you just learn to deal with it. looking into other options fs
I play claw and it feels fine. At first, your hands get a little sorr because its not used to clicking button like that, but once you’re used to it, theres no pain, at least for me
14:30 My strip doesn't have a sticky newe the too. Only the wide one in the corner.
Mine to did you find a solution
@@CaptainDug I think the one that guy has is a slightly different model
I would think if you already have the two back buttons installed all you would need it the other board and the back cover, am I wrong ?
Does it remap for L3 and R3 as well?
It can but it takes soldering which I didn't do in this video.
@@ALinctotheGear Does it come with the soldering wires or pieces despite it?
should i get the metal or plastic paddles?
Cool video.
Im curious how this mod compares to the dual sense edge or the scuf custom controller.
It's a bare bones version of those since those add more features like short throw triggers.
Any cheap alternatives for 2 buttons perhaps?
Yes but it'll require some soldering and a few other tools like a hot glue gun. You want to buy remapper flex board, kynar wire 30awg, tact buttons and some caps.
Ima buy this for my 030 ps5 controller and see if it works I hope it does 😢😢
Do it!
Will it still fit in the ps5 dock
Not sure which dock you're talking about? The official charging dock? Most likely not but this company does sell an extender for charging.
amzn.to/3NsfrPW
my backpeice to cover the motherboard won't fit pn, can you think of any really why?
is the extremerate kit fine to use on mw3. ik its just back buttons, and this is a stupid question but since u install it yourself im just making sure they dont thnk its a mod or something. So can u use this ban free on call of duty. I ordered them and i wanna start using them but i just want to double check all there stuff is fine with the new game
I honestly couldn't tell you but it's shouldn't because it's only adding buttons like a regular pro controller. There's no extra features beyond that. It seems many people use it for CoD based on looking at the extreme rate subreddit.
Hello,
Great video by the way!
Is it possible to charge them using the official playstation charging station with these remapped controllers?
Not by itself, no.
You'd need this adapter: amzn.to/41Afr6z
ive had one for 2 months now but now im having to click it more then once for it to register or work but it works fine when not playing a game has anyone els have this problem
I use the same spider man controller i have been searching for a video with my same controller i need more red in the controller but i dont like the red grip in the starting but i dont mind black can you tell me if rise 2 with 2 back buttons is better or 4 is better
They are the same, only difference is the buttons. I personally prefer 4 buttons.
@@ALinctotheGear thanks
i bought the version with only 2 paddles, can i still use this video?
No, there will be some differences and I couldn't tell you exactly where the variances are.
Mine turned into a rapidly flashing light I don’t know what to do
Woah! I don't know what that could be but luckily ExtremeRate has a full support page to help. Check it out here:
extremerate.com/pages/extremerate-ps5-controller-rise-remap-kit-faqs#:~:text=If%20the%20red%20light%20flashes,the%20Remap%20PCB%20is%20broken.
I like it
Does this work with 040?
No but they have one that does and there's instructions floating around that show you how to install it because it is different install steps.
Lol I want to do this so bad but don’t want to fuck it up 😂🎮
man for the back two buttons that you attach at the end.. im having the hardest time snapping the bottom part in.. how the hell did you do it you didnt even show
I had trouble many times yesterday too with trying to snap the back buttons onto the backcase until i realized at 20:30 that i didn't put that board correctly slotted there so the lower part of the board was kinda elevated up from its place and i screwed it in and that was how i could not snap the back buttons in. I fixed it and it works
coooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooool
You're cool 😎
Yes very strange decision by ps to only include 2 back buttons, when all other controllers in this price range come with four.
Big miss for many for sure. The rest of the controller is good though.
Thats tooooo much for 1.10KD ratio :/ …
'Promo sm'
Yea we’re here for the PlayStation controller..could care less bout your Xbox controller
ok and
DO NOT BUY THIS KIT. mine came without the adhesive at 14:18, it’s impossible to do without. Now my controller is completely ruined as well. DONT BUY THIS THEY DONT QUALITY CONTROL CHECK ANYTHING
Good video tho. But definitely don’t fucking buy it.
Mind didnt come with it either what do i do
@@HughMunguswut69prob was The factory that forgot
Easy fix get some adhesive 😂
@@alansakaith4805 adhesive should’ve been on it like the other kit I did. I’m not putting random adhesive inside my controller.