As always, this company provides excellent tutorial installation videos and products. This worked flawlessly on the newest gen BDM-050 for me 👍🏼 Thank you !
For anyone else who gets worried when the LEDs don't turn on after plugging in the battery (like the video shows), don't worry. My LEDs were fine when I turned the controller on, so it may happen for you too.
I just installed all 3 kits (LED, Rise 4, and Whole Clicky Button), and it went smoothly! I definitely recommend installing the Clicky kit first, then LEDs, then the rise kit in that order, everything works great!
This is really awesome. Thank you guys always. Will you guys be able to make a video with all of BDM-030 ExtremeRate upgrades included just like for 020 and 010? I want to know the steps if I were to install both LED and Rise4 to my controller.
Muchas gracias. Compre el anterior modelo con las ansias, sin mirar el numero de placa... y me lo comi. Pero ahora si. Lo habéis bordado y habéis sacado un modelo, para la placa BDM-030 AHORA SOLO FALTA UNA PARA EL DUALSENSE EDGE y si le sacáis también el botón PS de colores... Lo bordáis. MUCHAS GRACIAS eXtremeRate
Hello, I just got done installing this kit and the rise 4 everything works great! The only issue I am having is now my “X” button will not work. I have tried both the new one and the original one. And there is no response with either. Anything I can do or need to do to get it to work again?
Are you going to make a back shell with rubber grip for xbox controllers soon cause the only option I have to get a soft touch one or keep the default one but they don't go well with the rubber faceplate and side rails so can you please make one soon
Can you mix this LED kit with the “Whole Set - Strong Version Micro Switch Clicky Hair Trigger Kit & Tactile Face Clicky Kit for PS5 Controller BDM-030” button kit or are they not compatible?
Pretty sure you still can, because on the BDM-010/20 you could. However the bdm-030 is so easy. That you just need to plug in the flex cable and that’s it.
not sure if you're still looking for an answer, but yes, this LED kit works for both the 030 and 040. The installation is different though, you'll need to watch this th-cam.com/video/-gtSy5IHffI/w-d-xo.html
I Installed the led kit and it wont change colors, only staying on red. I installed a led kit on my bdm-010 controller and it only stays on color red. Tried pressing dpad up and right and square for 5 seconds and it doesnt work. I made sure all my buttons were working with a software and they do. Thanks in advance.
As always, this company provides excellent tutorial installation videos and products. This worked flawlessly on the newest gen BDM-050 for me 👍🏼 Thank you !
For anyone else who gets worried when the LEDs don't turn on after plugging in the battery (like the video shows), don't worry. My LEDs were fine when I turned the controller on, so it may happen for you too.
Omgosh!!! just got my 1st controller moded and it ROCKS!!! ty guys, u're doing an amazing job, I fkin love my controller ❤❤❤
best modding company ever
I just installed all 3 kits (LED, Rise 4, and Whole Clicky Button), and it went smoothly! I definitely recommend installing the Clicky kit first, then LEDs, then the rise kit in that order, everything works great!
This is really awesome. Thank you guys always. Will you guys be able to make a video with all of BDM-030 ExtremeRate upgrades included just like for 020 and 010? I want to know the steps if I were to install both LED and Rise4 to my controller.
We will do it, please stay tuned
@ExtremeRate will there be a kit for the edge or will this one work
Muchas gracias. Compre el anterior modelo con las ansias, sin mirar el numero de placa... y me lo comi. Pero ahora si. Lo habéis bordado y habéis sacado un modelo, para la placa BDM-030 AHORA SOLO FALTA UNA PARA EL DUALSENSE EDGE y si le sacáis también el botón PS de colores... Lo bordáis. MUCHAS GRACIAS eXtremeRate
Hello, I just got done installing this kit and the rise 4 everything works great! The only issue I am having is now my “X” button will not work. I have tried both the new one and the original one. And there is no response with either. Anything I can do or need to do to get it to work again?
Is this available foe the dualsense edge?
I installed the clicky triggers will I be able to install this ontop of that inside my controller?
Can i have these and the mouse click triggers on at the same time?? Someone let me know
Ordered one after I found out what bdm my controller is
What if my controler dosent sync back to my playstation after i finish
Is there an option for this on the dualsense edge
Are you going to make a back shell with rubber grip for xbox controllers soon cause the only option I have to get a soft touch one or keep the default one but they don't go well with the rubber faceplate and side rails so can you please make one soon
0:29 anyone know where I can get them poron foams ?
Can you mix this LED kit with the “Whole Set - Strong Version Micro Switch Clicky Hair Trigger Kit & Tactile Face Clicky Kit for PS5 Controller BDM-030” button kit or are they not compatible?
Pretty sure you still can, because on the BDM-010/20 you could. However the bdm-030 is so easy. That you just need to plug in the flex cable and that’s it.
@@m5_sheep510 well I’m not sure as it says nothing about compatibility on the store
@@Smiles-TH-cam I just did it and it works great
So i have a Bdm-040 will this one work on it aswell ?
It work's ?
Hello y’all finna answer my question?!!
not sure if you're still looking for an answer, but yes, this LED kit works for both the 030 and 040. The installation is different though, you'll need to watch this th-cam.com/video/-gtSy5IHffI/w-d-xo.html
I Installed the led kit and it wont change colors, only staying on red. I installed a led kit on my bdm-010 controller and it only stays on color red. Tried pressing dpad up and right and square for 5 seconds and it doesnt work. I made sure all my buttons were working with a software and they do. Thanks in advance.
This guide is for bdm-030
I have TOMSIN programmable back paddles installed already, would I be able to install this as well?
Any news on the victor back button kit for dualsense? Is it going to be 2023 or likely 2024?
We will try to work out the new thing for the dualsense by the end of 2023 or the beginning of 2024
when will there be mods for dualsense edge? I really want a shell for it!
Soon!
So what if I have a face Clicky kit on my controller would the leds still work??
The led FPC ribbon has holes cut off around the button areas.
@@TEPL1so does that mean i can have my mouse clickers with my lighs at the same time or no?
If you turn the controller off will the leds turn off aswell?
No, you have to turn it on/off manually
So there is no on/off sync like the last kit?
We gotta get you an electric screwdriver!
Nah. He is using the tools that come with the kit
Pretty sure this is the tools that come with the package
Finally
Mine doesnt work
Is it normal for the lights to respond to commands even if the controllers turned off while it’s charging?
Yeah I believe so because it’s still getting power which is why the light shows up when charging on the normal controller
My tool broke 😭
Giutri
Mine doesnt work. Installed perfectly. POS
Day send me the wrong one 😂🤣
Same here
am i able to install both this and the mouse click trigger kit?
Yes! It works great!