Nissan versa clock spring/ steering wheel airbag replacement and steering angle sensor
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- like comments and subscribe and share the love.
help me help you by donations no matter how small it is i really appreciate it here is my link to PayPal send it as if you are sending it to a friend
www.paypal.me/...
thank you for your love and support
Yes, disconnect the battery and wait for about 10-15 mins. You are working with a explosive charge(the air bag). Other than that good video. Remember safety fist!
You helped me save a lot of money because of your video. Thank you so much for sharing this.
Thank you for helping on how to install that clock spring. It's absolutely useful. thanks again.
Thank you for sharing your expertise. You are a really good teacher. Please keep making these videos.
Thank you for showing there's a 3rd release and also showing what we are trying to push on. The auto parts people didn't...
My wheels jist got 2 to release. I cant get it aggh!! But thanks for showin tho
The 1A Auto Parts video, right? They make great videos, but when dude was like, "just rock it forward" and his whole assembly came apart like butter, I was sitting in my car trying to tread the line between forcing it and being paranoid going, "whyyy???!!! It's only a 2012! It shouldn't be this stuck!" So yeah. Thanks @Dullah for explaining that step.
Very well done, and a very detailed explanation of what you need to do to get this job done! Thank you so much!! Great job!
Did on my own so easy wow thank you
Gracias amigo
Fkn great video my dude. It literally saved me hundreds of dollars. I'm so stoked
Very helpful! Thank you!
Great video! Tums up. Thank you!
Muy buen video,, casi no hay del espiral del versa en español
Thanks
Great video, I now have a working horn and airbag. Thank you 😀
I was just waiting for that airbag to explode in your face, do not do this everyone! Disconnect the battery and touch the positive terminal to the negative terminal to dump the capacitors and it's a good idea to wait a few minutes after to remove the clock spring. I've seen it happen a few times to guys in my shop and its always a Nissan or Infiniti.
Lol me 2
What to do when one spring is stuck so you can’t remove the steering wheel completely ?
Badman yuh brave nuh fuqq 😂
You left out a very important step....disconnecting the battery terminal ?????
Thanks for the video! Where did you get new clock spring and for how much?
Hi, why with the car on? I've seen people disconnect the battery first before they start
Probably because you can’t turn the steering wheel without the steering wheel locking on you. You can only turn it all the way to the left or to the right when the car is fully turned on
@@original__gmebvy You're right that you need the key in/on to turn the wheel but you do not need the battery connected--apparently it's fully mechanical. I have a 2012 Nissan Versa and was able to unlock my wheel and fully rotate with the battery unplugged for >10 minutes and everybody other than this video says you should remove the negative terminal from your battery before attempting this for airbag safety.
So, just to be clear, you didn't unplug the car battery? I have unplugged clips in the past with no problem, I am assuming it's just like that for these clips?
Do unplug the battery. He didn't reply to you here, but he did respond to PJV1201 and said that while it shouldn't go off either way, it's a good precaution. Also, every other video and tutorial on this topic, or removing the steering assembly in general says to do it (see the A1 video, or posts on Nissan Forums, etc., etc.)
Always disconnect the battery
Is their a code to put in? For the airbag
So, it's safe to do this without disconnecting the battery? I've seen other videos where people were scared stiff of removing the airbag connection because it may go off, even with the battery disconnected. You were working on it with everything switched on so I'm confused! 🤔
Once there is a fault with the airbag system the computer automatically disable all of the airbag but i would recommend that you disconnect the battery
@@DULLAHGOSOHARD thanks. I'm considering having a go myself now that I've seen how relatively straightforward it is. Thanks for the video. 🙂
Very 👍 f... Awesome
Plz reply!!! I did the change of clock spring and my horn works now :) thank you 🙏🏼 BUTTTT my airbag light still on. How to turn off? Do I have to go to dealer? Is it free?? Plz reply!!!
You might need ro clear the air bag code or try disconnect the battery for a minute or 2
My 2012 versa horn stopped working and I have the airbag light blinking as well.
That could be a sign of a bad air bag
@@DULLAHGOSOHARD thanks for the reply. Do you know if any mechanic can replace it ans how much it should roughly cost?
@@bosstone700 i don't know about the cost but most mechanic can replace and clear the code
@@DULLAHGOSOHARD thanks. I was about to purchase a clockspring on eBay for $12 bux thinking that could be it.
@@bosstone700 normally when the horn stop working and the airbag light comes on its the clock spring most of the time
2016 versa ,make it easy!
Dont do that again my friend. Disconnect the battery - + together and wait for 3 min
What is model of car?
Versa
@@DULLAHGOSOHARD what year?
SAFETY ALERT:This should not be done under a power load. Please disconnect your battery 30 minutes prior to doing this procedure.