I have found a brushless outrunner motor that fits in the footprint of 280/370 brushed motor, the D2225, it's only 22mm in diameter and 25mm in lenght, 3.175mm shaft x 13mm long already in the correct side so no need to do any modification to the the motor! Bit more expensive at $10-15 compared to
Will I need to do any cutting or anything or just remove and switch motor and add the gear. Also would that motor fit in those aliexpress metal reduction gearboxes or should I just stick it in a stock 370 wpl gearbox
Such a great video, definitely feel more confident in going brushless on the b36. I’m working on a LCG chassis for it to run with metal links, full suspension and now brushless! Thank you sir!!!
Well sir I don't have a 3D printer. I don't know much about the process e.g. downloading the files. I'm in Osaka Japan. I'll start looking for the service you recommended. Thanks for the help.
Yes it can. For speeding, you can use inrunner brushless. Here's a video (It's MN45, bit using 2-speed gearbox for WPL): th-cam.com/video/wg5MaKeiNMM/w-d-xo.html
Great video! At 1:20, is it Hobbywing 16BL30 thats in action making crawling so smooth? Will it start slowly with that esc? How many kv is that motor? Thanks!
Om saya pasang outrunner di mn86 esc pake yg warna biru cinaan motor A2212/10T 1400kv. dikasih rintanan jalannya gak kuat kaya “ndut ndutan gitu om. Kira2 kenapa ya? Thks om
Unfortunately I never had single speed metal gearbox (the one with "U" shape) so I don't know the gear ratio. But I guess for crawling, 1400KV might be better. But again, I never try it on metal single speed gearbox.
Can you send the file to me or teach me how and where I can find the file? I found a service in Japan and I can get the parts printed here. Thanks in advance. Ed
Hi Edward, I don't sell it. You can download the 3D files for free and then you can 3D print it yourself or if you don't have 3D printer then you can use 3D printer services on your area.
Adapte un 2435 de 4500 kv y es demasiado rápido muy brusco. No tiene mucho torque más bien es más rápido estoy pensando en ponerle un motor 9im motor 3532 de 1470 kv .
Drone ESC works better with outrunners, cheaper BLHeli_s works OK if you tune some settings, but BLHeli_32 performs better and you can flash to AM32 or Escape32 firmware for much better crawler performance
@@randomstuffs1671 from others that runs those Blheli ESCs, I do not see any cogging, can do silent slow crawl, unless the motor is too powerful for the ESC or the battery that is
Om bos aku bisa pesen ga gearbox dualspeed+outrunner motor nya seperti yg di video ini...mau bikin sendiri ga ad peralatan yg memadai euy...klo pesen ke c om kira2 abis brp...jd tinggal pnp di rc saya nya 🙏😊
If you're going to order another pinion, just get one with a 3.17mm bore, no need to file down the shaft, make the job so much easier but unfortunately the 370/25mm gearbox calls for a 12T 0.4m pinion and no one seems to sell it, I was able to source one for the MN78/MN82 stock gearbox 10T 0.6m
![ILLSLICK - KILLSHOT REMIX [FULL VERSION]](http://i.ytimg.com/vi/RIK8RrqIAzE/mqdefault.jpg)
I have found a brushless outrunner motor that fits in the footprint of 280/370 brushed motor, the D2225, it's only 22mm in diameter and 25mm in lenght, 3.175mm shaft x 13mm long already in the correct side so no need to do any modification to the the motor! Bit more expensive at $10-15 compared to
Will I need to do any cutting or anything or just remove and switch motor and add the gear.
Also would that motor fit in those aliexpress metal reduction gearboxes or should I just stick it in a stock 370 wpl gearbox
@@michajagieo6528 DYS/Flashhobby D2225 motor, also sold under other brands but I've purchased from both and they're great little motors
Big help,thanks🏴
親切、丁寧に教えてくれてありがとう。😊
Where did you get the adaptor plate from?
Such a great video, definitely feel more confident in going brushless on the b36. I’m working on a LCG chassis for it to run with metal links, full suspension and now brushless! Thank you sir!!!
My pleasure :)
Hi! Thank you for this video. Dont you sell the 3d printed adapter?
Hi sir, I have a questions what servo do you use for this brushless motor?
Thank you!
Excellent video!!! Thanks.
can this be done on the new single speed transmission of the wpl b54-1
Can the motor work on a hsp rc 110scale car
What do yiu think about using a 1400kv 17T. Id like to crawl very slow, but habe high torque. I noticed some trk4m furitek go up to 3456kv
1400KV will be alright. And in fact I think it's the ideal speed. It is slow enough but not that slow
@gadogamix thanks! I actually ordered it last week
Super informative. Cheers mate
Thanks mate 🙏
@@gadogamix BTW what size outrunner motor would you recommend for a 1/10 crawler?
I haven't tried it yet so I'm sorry I can't give you any information right now.
This is awesome I wish I could buy one ready to go though
A large number of poles and a large torque is great! How hot is the motor and ESC during operation?
Well sir I don't have a 3D printer. I don't know much about the process e.g. downloading the files. I'm in Osaka Japan. I'll start looking for the service you recommended. Thanks for the help.
dream to make WPL trucks like Dakar rally trucks and cars with brushless set up. Do you think its possible to make it with 30-40km/h speed?
Yes it can. For speeding, you can use inrunner brushless. Here's a video (It's MN45, bit using 2-speed gearbox for WPL): th-cam.com/video/wg5MaKeiNMM/w-d-xo.html
Also. You could have fixed it in dremel, and used the file!🎉
Great video, thanks for sharing!
Does the motor also fit with the one speed metal gearbox?
Yes
Great video! At 1:20, is it Hobbywing 16BL30 thats in action making crawling so smooth? Will it start slowly with that esc? How many kv is that motor?
Thanks!
If you using rather low KV motor (i.e 1000 or 1400KV), It can also smooth crawl even if using cheap brushless ESC.
I'm so happy to find your site. Can I ask what motor you're using?
I'm using 2208-1400KV. It's a cheap generic china drone motor without brand.
Pinion gear link please?
Very useful
Mantap bang..
Om saya pasang outrunner di mn86 esc pake yg warna biru cinaan motor A2212/10T 1400kv. dikasih rintanan jalannya gak kuat kaya “ndut ndutan gitu om. Kira2 kenapa ya? Thks om
Try Blheli_S drone ESC, better suited
Hi I'm currently using single speed metal gearbox for my wpl c24 which one is better 1400kv or 2200kv? Im more on crawling.
Unfortunately I never had single speed metal gearbox (the one with "U" shape) so I don't know the gear ratio. But I guess for crawling, 1400KV might be better. But again, I never try it on metal single speed gearbox.
@@gadogamix if I'm providing you the gear ratio are you able to suggest what kv I'm more on crawling so I want some ounch and torque
@johnalexanderayudan9229 for reference the ratio should be 1:35, so 2200kv would be better
Can you send the file to me or teach me how and where I can find the file? I found a service in Japan and I can get the parts printed here. Thanks in advance.
Ed
Tq for the info, so now, instead buying the 370 motor, im gonna buy this, more torque.
Good tutorial
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
Very interesting teaching. I'd like to know where I can purchase one of your motor mounts . Thanks in advance.
Best wishes,
Edward
Hi Edward, I don't sell it. You can download the 3D files for free and then you can 3D print it yourself or if you don't have 3D printer then you can use 3D printer services on your area.
Adapte un 2435 de 4500 kv y es demasiado rápido muy brusco. No tiene mucho torque más bien es más rápido estoy pensando en ponerle un motor 9im motor 3532 de 1470 kv .
what esc you use?
Drone ESC works better with outrunners, cheaper BLHeli_s works OK if you tune some settings, but BLHeli_32 performs better and you can flash to AM32 or Escape32 firmware for much better crawler performance
Hello everyone! Is there no cogging issue with this motor?
Use a Blheli_S drone ESC
@@daijoubu4529 hi! Will it eliminate the cogging or just lessen it?? Thank you!
@@randomstuffs1671 from others that runs those Blheli ESCs, I do not see any cogging, can do silent slow crawl, unless the motor is too powerful for the ESC or the battery that is
Om bos aku bisa pesen ga gearbox dualspeed+outrunner motor nya seperti yg di video ini...mau bikin sendiri ga ad peralatan yg memadai euy...klo pesen ke c om kira2 abis brp...jd tinggal pnp di rc saya nya 🙏😊
Ini bagus. Boleh juga.
Esc Can forward reverse?
I use a normal RC Car ESC, not a drone ESC. it can go forward, reverse, also brake.
Btw, just info saja, video yang versi bahasa Indonesia ada di channel KuikTip bro.
👍
If you're going to order another pinion, just get one with a 3.17mm bore, no need to file down the shaft, make the job so much easier but unfortunately the 370/25mm gearbox calls for a 12T 0.4m pinion and no one seems to sell it, I was able to source one for the MN78/MN82 stock gearbox 10T 0.6m
𝐩𝐫𝐨𝐦𝐨𝐬𝐦 💋