Would you pay $250 for this Toy RC Car?- All Metal High End WPL C24-1 RC
ฝัง
- เผยแพร่เมื่อ 6 พ.ย. 2020
- I'm sure this isn't the Worlds Most Expensive WPL, but it's not cheap lol! Love how it performs though. The 370 Single Speed Motor with the Hobbywing 1080 ESC is a good combo!
My Second Channel: / @tomleyii3348
Buy the Full Metal WPL Chassis here:
www.banggood.com/All-Metal-4W...
Hobbywing 1080 ESC:
www.banggood.com/Hobbywing-Qu...
WPL C24-1 Kit:
www.banggood.com/WPL-C24-1-or...
Dumbo RC Transmitter/Receiver
www.banggood.com/DumboRC-X4-2...
Banggood Specials;
www.banggood.com/marketing-Ne...
Join my Exclusive 'Private' Facebook Group: / 418163309165398
My TH-cam Tool: www.tubebuddy.com/youtube000
Facebook: / tomleysgarage
Instagram: / tomleyrc
Twitter: / tomleyrcgarage
Tomley RC © 2020 Tomley Media Ltd. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Tomley Media Ltd. - บันเทิง
![The New [MASSIVE] $89 WPL Tractor & Trailer!](http://i.ytimg.com/vi/VGg8WM-EFNw/mqdefault.jpg)
I have started looking over my old WPL trucks. I put them up after stripping out the diffs. One of the 6X6 I am doing up to look like one of the old 2.5 ton trucks I drove in the Marines.
Super clean!! That thing looks so beautiful my god...
Don’t forget with that fully adjustable four-link you can point the nose of the differential up so your drive shafts are more straight
Right, that's a tip from the 1/1 world, where minimizing your driveline angles is a good thing...👍
That looks really nice. Just got my first c24 crawler kit. 👍
I'm getting ready to finish up my build on my C24-1
Fully adjustable metal suspension
Metal driveshafts
Bigger wheels with very soft tires
Res-V3 electronics
Stock motor stock trans
Portal axles
Metal servo mount
Steering servo axle mount
Diesel sound mod
Bigger batteries.
I need to get a steering servo
Rear chassis support/hitch receiver
370 motor and 2 SPD trans
Winch
Metal front bumper
Your videos are fantastic. Looking forward to modding my new c24-1 based on your videos. Great work.
I've got a white C24 with all the metal upgrades sat on a shelf. Need to get it put together, that looks really nice. Handled those big rocks really well. Nice vid..
Yeah, pretty good for a little 1/16
Wow, I love it. Great job. I want to do this for the B series.
Love the spec of this, mine getting there very slowly haha I am defo going to purchase the metal chassis
Sooooo slooooow....nice! Thanks for enjoying this so much!
Thanks Randal
Great work Bro!! Really nice truck, great video. Thanks for give tips!! Have a great weekend, hopping you are safe!!
Thanks mate. You too
Awesome RC and upgrades
Mate that looks blooming awesome mate, you did a great job there 👍
Cheers Marc. Runs lovely... just a little expensive
@@TomleyRC lol yeah just a little mate, one of a kind though 😉
I've got an RC4WD tf2 with about 650 u.s.in it so for the look and performance you are about 400 ahead , great video as always 💪💪👍👍
Just a tip because I use the hobby wing 1080 in four of my rigs. If you turn up the frequency to 8k or 16k (I believe it's either the 14th or 15th option) It will quiet down or silence that high-pitched whine. It's the pulse with modulation (pwm) option. 👍 I'm sure it's much easier to hear on camera than it is in person. Great vid though.
Thanks mate, someone else mentioned that. I’ll give it a go... and yes the camera mic is much more sensitive to it
Looks well on the trail👍👍
If I could 'play' with any of your cars, it would be this one. The perfect c24 build.
Got about $180 into my WPL C24-1 - KM, so I'd have to say yeah I could see it. Thanks for sharing!
Cheers for watching
Nice little truck!
Very nice. I need to finish my c24-1 build. I have all the metal parts and 2 speed gear box
there is an all metal 2 speed gear box as well.
The rock crawler looks cool
Awesome! I just put some axles like that on mine. I love them! I put a washer on my rear to fix the angle. I made a video on it.
yupyup, tops of the A285004 shocks to the inner tray holes = NICE flex!
Yes, I have seen a few people do this... and it works really well!
@@TomleyRC with the stock plastic frame parts and lighter other parts those A285004 shocks may need lighter springs is all, not a problem with the heavier MN D90
I bought that full metal chassis in Amazon for $162 to put it on a FAYEE MN-90 Land Rover and fits dead-on point. Very smoothe, and heavy 👍
Mate would it fit the 003-1 do you know? Thanks in advance 🙏👍
@@bugsy742 can't tell off hand like that and mislead you, sorry 😞
@@Modifier-RCs thanks bud 👍
Great video bro 👍
I've built few C-14 and C-24. The one is Super LCG belly dragger, another is LCG with extended wheel base from 190 to 245 mm ands one is 6x6 rig. I never exceed 200$ per rig starting from scratch except the 6x6 where I invested 300+ $ Very comfortable platform for builds and experiments ;-)
Great review. Thx.👍
Pretty nice work, dude! It looks fantastic this way! 😃
Stay safe there with your family! 🖖😊
Thank you... stay safe 😎
I just feel that the c24-1 still does not have a small turning radius. What do you suggest we can do to makw the front wheel turn much tighter?
I found that the steering hits the shocks in the front when you turn full left or right , is that not enough to be a problem ?
Hey any thoughts about installing a dig in this little truck, if that could work to give it a drag brake and more ability, maybe wider, larger tires and reposition the rear shocks even more to drop the CG? Does that make any sense to you?
How would this do inside of the house over home obstacles like books, ramps, stairs, kids toys, etc.? Is it too big?
I bought a c24 kit and upgraded it with metal parts, costed me about 130$-ish usd including a dumborc x6 and a cheap 20a red pcb esc, the modulation is quite similar in this video, the only difference in my build is the shocks and the axles, I went with the scale looking wpl metal axles for a more realistic look.
Sounds cool!
My c 24 also started off cheap but slowly getting more expensive with mods but I love it 🥰👊🏻👍🏻
They can get expensive
Hello sir, do the tires rub on the shocks in the angled configuration? Thank you for the awesome content! 👌
I'd like to see this run side by side with a WPL KM version, with the same electrics and identify where all that cash makes it better.
yup, stock looking metal axle casings are 13 bucks for front+rear, not really sold on these big dollar "all metal" versions. the C24 and MN-D90 here have them now and both crawl really nice.
Good idea!
I realize Im kinda off topic but do anyone know a good website to stream new movies online ?
@@aidanjavier5714 TH-cam.
You we're driving in poison oak it looks! 😂 Nice wpl, you got me shopping..
Finally a notification when I video is first uploaded!! Looks pretty good...that cost though!? Not sure I'd feel comfortable dropping that amount into one really....
Haha, glad TH-cam is finally on the ball!
Nice vid man!
Cheers dude
Hey I've been having some power trouble with my wpl c24 I put a 370 motor in it and it will crawl but not over things very well. I could be trying to crawl up some rocks and it will stop like there is no power and I have to double check my controller for it to move and even that doesn't help it. Do you have any ideas on what's making it do that?
This? No. The Kei truck, absolutely. Nice content thanks for sharing.
Thanks mate
hi what are the cups the screws sit in on the side chassis called ? or size in mm? thanks tomley
I have been debating one of this.
For a cheap truck challenge haha
It looks so good "In the Metal"
Just got a D12 all metal chassis... that also looks really nice!
This truck is what my dreams are made of
I've upgraded a few of mine with a 370 motor, ESC
w/ brakes. 2-sp trans, metal D-shafts, axle housings and brass gears. bigger wheels and tires. I have maybe $ 85 max
Are you using the original tires? tell me some good ones for her
Great video as always 👍
Do you think it's worth going with the wpl RES-V3 radio, esc and sound controller all in one over the your set up with the dumbo rc controller and esc?
I'm not worried about the sound of the engine and the obvious price difference.
The Res V3 is certainly a decent set up.. it this is a little better
What motor do you use? I thought quicrun 1080 is only for 540 (and above) motors?
Works well with 370/380’s as well 👍
You don’t see much actually good crawler runs out there to test there skills on. I wish they did. Honestly would actually make this little project actually look challenging and Appropriately appealing like.
Not bad, ton of mods, you made her pretty capable. Doesn't look too bad either. They'll have clips from your vid on Banggood attached to the description or comment, lmao! Cheers
Yeah Banggood share a lot of my stuff... haha
Tomley, are the c24-1 upgrades a big difference over the older c24? Thanks
Not massively over the new versions of the C24/14 have metal gears and better gearbox now anyway. But compared to the old plastic geared ones, yes...very good!
Hi tomley I have a wpl b1 and the drive shafts keeps slipping and the truck won't move, do the driveshafts already have a flat side of the output shafts? I have the older wpl b1, if so I have metal driveshafts with grub screws
I put a bit of super glue on them to stop them slipping. Or you can get metal ones pretty cheap
@@TomleyRC I have metal ones but the plastic ones broke do these have a flat side of the output shafts?
I do want to upgrade to all metal like that .. i have the same 370 motor and metal drive shafts on my c14 and i like how much heavier it is
Yeah, the weight makes a big difference
Picked up a RTR C24-1 for my nephew for Christmas. Just got delivered today. Had to make sure it was okay of course! First time I have seen a WPL in person and was really impressed. Thinking about getting the kit version but don't want to go mad with electronics. Would something like the esc out of the Hobby Plus CR18 with the 2S lipo be suitable?
My advice mate is to get the WPL ‘RES-V3’ Electronics kit along with tour kit. It’s the cheapest option to get it running, and is actually a decent set up. But if you have some stuff already it should work fine as the little 180s don’t use to much current
Thanks Phil. Just ordered the C24-1 kit from Bangood. Was looking at the V3 kit you recommended but it says its not suitable for the 180 size stock motor?
Nice💙
Still a fantastic looking truck!!!#
I have a wpl c24 and I'm trying t o save money for the upgrades so far I put a 480 engine from a fc model f1 the engine is good but no way to regulate the speed I'm going g to put the stock tires back on
What shocks are you using?
hey man thx for all the content! quick question: I have a C14 and C24-1 (stock 130 and 180 motors respectively) and the electronics died.. I'm looking to upgrade to an Austar AX7s transmitter and receiver/esc combo but I can't find the voltage rating anywhere... do you know if that's compatible with both 130 and 180 motors if I solder on some new wire with JST connectors? I already have 7.4v batteries w/ JST connectors and 3-wire servos for both, but wanted to use the stock motors w/ upgraded electronics if possible
Yes, the 130/180 motors are fine on 7.4V. In fact, they are usually ok on 11.1V as well
@@TomleyRC perfect! and I should be fine just removing the 2-wire leads that came on the 130/180 motors and soldering on leads with JST connectors? leaving the motor capacitor in place? any specific leads to get/avoid?
@@michaelmcdonald1620 Should be good. As long as the motor is getting Voltage, you should be good. Those little ones don't generate to much heat/current under normal conditions
Nice Video! SUBSCRIBED!!!
Thank you
Nice👍
U should get a losi mini 2.0 next there really good cars,would love to see one on your channel man 👌
Yes I have looked at them a few times. Maybe next year
Please tell me how u mounted the shokes please
I have many problems with the bridges wpl and other, I have tried them all and the gears crack
what battery did u run in this rig?
Hey Phil I'm up grading mine please if you know could you tell me the size shock you are using that exactly what I was planing on doing what you did and it will take out some the guestermation work cheers bud 👍
Hello mate... I’ve not been able to find them separately... they come with the chassis. Good oil shocks have been a pain to find for most of the WPLs
@@TomleyRC yea I've had a little look if you have time and remember please could you measure the shocks an let me know the length please but no worrys if you havnt got time bud
@@rcclan search eBay toys and hobbies for A285004 are about 12 bucks a set of 4. if you have a decent local hardware store you can get softer springs for them if needed.
@@modelnutty6503 thanks ill have a look appreciated bud
That front output shaft from the transfer case looks horrific, why is it so long it must flap around in the wind?
Isnt it original wpl c24-1? or did you customize it by own?
This was the full metal version
Where can I get toyota badges and decals for this appreciate any info you have ..
Could you use a castle Sidewinder Micro 2 on these?
Yeah I expect so
Mine has a 260 motor and is waiting for the body to get back on
it is looking amazing! I also got oil shocks. but the springs are to stiff. so cheap it doesn't matter. i still use the originals. until i find softer shocks.
Maybe change out the shock oil?
@@lyricalcoma1979 but my springs are to strong for the lightweight truck.bought some random brand from china (online).
I was thinking this was gonna be that bullydog one they were selling of Facebook for about 250 rtr it was a wpl with metal parts from what I could tell.
No heard much from that company recently... ?
Come on Tomley accept the challenge it’s all in fun
Hey Tom why dont you reviewing the new wltoys 124019
I will once it arrives 😉.... I have both the new ones coming
What are your thoughts over the mn version buddy..🤔🤔🤔👍
The MN99s is really good.
Qual esc e motor vc tá usando?
Tem na descrição do video, é o 1080
Wow 😳 full metal??
Hey dude I just got one of these and I’m having some steering issues. When I turn the steering wheel left there’s a loud clicking and the wheels don’t turn but it works to the right. I’ve tried dialing it in but I’m new to this rc stuff so I have no clue what I’m doing. Hoping someone can help
Sounds like something is catching? I’d double check clearances and the screws etc
@@TomleyRC ended up taking the cabin off and getting down to the gear box and had to open it up and there was a torn o ring on the inside pushing all the gears so they were meshing with teeth unaligned. Appreciate the quick response and help
How did you guys got it expensive
iam jealous of those rimms.
What's the wheelbase?
u can also buy c44km and maybe buy better oil suspension it also includes free wintch and u have as good crawler as this is, maybe even better for everything, we talking about less then 150eur..thats what i did with my c44. and to me its insanely capable crawler.
Yes the C44 is a very nice truck!
that came with those metal wheels??? where?
do you have any coupon codes for the c24 1 kit
thanks
Don’t think so at the moment.
@@TomleyRC thanks anyway man
cheers
Yes if I had that much I would
Looks really good and performs well for a tiny truck 👍. I might have 2 get me the white 1 (cheap version,lol) so it can match my new white RC4WD TF2 😄
Oooo a TF2! Very nice!
Definitely over priced Imo 😂 but it can crawl like you say them 1060 are awesome I got a couple so far definitely worth it great little trucks i love them
Yes the 1080 is a beast for crawling
Where you got the shoks?
Come on it as stock
@@TomleyRC those chunky oil shocks come in stock? 🧐
Turn your 1080 esc to pwm 16.000hz (its in the options) and then its silent. these beeeep is annoying.
good woudnt say that super expensive. subed ofcc!! great vid! check out the recat gen 8 v2 pls
Kit version is 50$, upgrade parts another 50-70$ yeah I got one! Why not, you can upgrade anything if you just think about it
I wish there was a 2 speed gearbox for the 370 motor.
Well you could always buy one and replace the single speed :)
There is
@@jgc0064 Yes, I have it now :)
wpl c24 wheel base shorting.
Its nice but not $250 nice, does look great though and cheaper than an RC4WD toyota
Yeah a little expensive!
Hi , these rc are not junk they are low entry price point but like the expensive guys they come all plastic and some metal gears . When you upgrade then then they become different . The same like the big guys out of the box even if they cost 400 quid they still need to be upgraded to become better. Some of the expensive boys even dare put junk electronics and your paying 400 not 40 .
Yes that is very true. Cheap doesn’t always mean bad
I'll pay you 250 for it, but only if you autograph it
I would pay full price...even if I go
broke
Im not saying that dont cost $250 but i just ordered my stuff (none of it is as good as yours) and it has exceded $250 very fast