How does an RC car work? Hobby Electronics Explained!
ฝัง
- เผยแพร่เมื่อ 28 เม.ย. 2024
- How does an RC car work? What bit is the ESC, and what is the receiver?
In this video, Aaron explains what every component in an RC car does, and how they do it - with help from Blitzy, the Blitzer Beetle.
Blitzer Beetle:
hobbiesdirect.com.au/Tamiya-1...
Electronics:
hobbiesdirect.com.au/electron... - ยานยนต์และพาหนะ
![[LIVE] : ONE ลุมพินี 60 | คู่เอก "สุริยันต์เล็ก vs ฤทธิเดช"](http://i.ytimg.com/vi/2ls0lZplik4/mqdefault.jpg)
![[TH] VCT Pacific - Regular Season - สัปดาห์ที่ 4 วันที่ 2 // T1 vs ZETA | TS vs TLN](http://i.ytimg.com/vi/QKGUHmA6gwY/mqdefault.jpg)
Finally someone explaining RC stuff without all the condescending gate keeping attitude. I’m trying to learn RC planes and let’s just say it’s pretty difficult to ask questions and get straight, informative answers in that community.
I’ve learned enough to realize the tech is the same as RC cars. Just more channels and servos.
Thanks again!
No worries! 2ch rc car stuff is so easy compared to planes haha
This is exactly what I needed. I wish I would’ve seen this video last week when I started my internet research. This video is the definition of concise.
Thank you so much.This has to be one of the best channels I've found that explains RC stuff. Once you have the basics down it looks quite simple
We really appreciate that :-) Hope it all helps!
@@HobbiesDirect Well the part prices aren't that friendly to people from developing countries so I guess I'll just enjoy the videos lol
Do a how to build your first rc car Pls?
@R3C01LZZ you really don’t need to know how to solder.. but it’s nice to know!
Buy one and follow instructions. Done ✅
@@youtubeebutuoy7065 how do I know what electronics to put in my car?
Buy a rc car kit if it has a manual
@@misterbubba4 if 10th scale, 3650 size brushless motors, 540-550 brushed motors, anything a little bigger will most likley work to
That toast pun earned my subscription
Ha! Glad to have you 🙂
the most clear explanation i need! good job sir
Great video sir.. lots of people will benefit from this.
Thank you so much. I just bought an RB10 and this is hugely helpful figuring out what everyone's talking about at the club.
Great to hear! Happy to help :-)
Very informative and concise, thank you sir.
Thank you for decoding all the notation and spec in a plain words. I know physics very well but found the notation was mysterious before I found your explanation.
Glad it was helpful!
Well done, thank you man for all this good information, keep up the good work 👍🏻
You are very welcome, it's what we do 🙂
the information about servo was very informative.
Extremely helpful video. Thank you
Fantastic video, thank you for this!
It's what we do!
Thanks I was looking for a video explaining how rc cars work very well explained.. thank you
Thanks so much for this. I purchased my first RC car in 25 years and could not understand why my receiver had no battery input.
Yeah, it's been decades since I looked at any of this. I think the advantage today is that the proportional speed control is replaced with solid state devices. Definitely going to take a dive here and see what's going on.
Excellent info. Just got my first trail/crawler truck
Thanks! Hope you're loving it!
Shoutout from Sweden 🇸🇪 Love your videos going to build on my dream vision
Very well explained video, thank you I just subscribed, been looking for a good video on this topic👊💯 Thank you bro.
Hi Aaron, thank you for taking the time to make this video, I’m learning every day. My question is a little outside your video subject but I’m an electronics idiot but I’m not a dumb guy, so I’m hoping to tap your expert opinion for some advice.
I’m trying to pull the rope on a lifejacket CO2 manual inflator (No, using the auto inflator is not an option) using either a servo or a solenoid with a button as the trigger on off. So, I’ve guessed the torque pull required on the rope is probably 3 to 5kg and this is a one-time use one time pull device I’m trying to build. I don’t even know if that is even possible to press a button once and get enough torque from a servo or solenoid to pull a rope? Would the servo keep spinning or would it stop after the button is released? Any advice or suggestions would be most greatly appreciated! Thank you so much!
i just watched it because of the blitzer beetle. it was the firs rc car i ever had. with the old esc that worked with a servo. very fun to drive! :)
Obviously the Greatest Of All Time RC car! They do handle really well, especially given how old the design is.
Helpful video thanks!
I'm wanting to convert a power wheels into RC; if I bought a RC car and took the electronics package out and hooked it to the power wheels battery and motors of the power wheels, would that in theory work? I was thinking of using a linear actuator in place of a steering servo.
Your attention to detail is outstanding! As a 3D modeler, I'm keen to explore the role of 3D-printed parts in achieving lifelike RC car customization
The possibilities are endless!
Great video, very informative - thanks for creating this! Subscribed and liked 👍!! Cheers!
Thanks for the sub!
Very impressive video good work
Thanks! Hope it was helpful :-)
Love your video very informative. Simple to understand for me lol at my age💪😅.. Ty again will be watching your stuff very good🙏💪💪
Nice video make more videos like this explanation.
This is 🥇
Thank you!
No worries, hope it was helpful!
GREAT ! SUCH A GREAT VİDEO AND BRIEFING ! THANKS A LOT !
I prefer my servos toasted with a little cheddar and bbq sauce.
You guys are hilarious.🤣
Yous actually have a TH-cam channel that's sick I've brought so much things from Yous an didn't know about this channel till now
Welcome to the channel!
Would it be right to say an arduino can act as an ESC? I’d like to do some form of steer by wire simulation and I’m wondering if arduino can work as the processor to not just handle throttle and steering but to also have feedback control
I'm currently reviving a toy grade rc truck that I found in a trash can, still in half of its original package! But unfortunately missing the remote. So I sourced a cheap battery and usb charger from Amazon, as well as a controller and receiver board, and shoud have it all together and running after Christmas! Again it's all toy grade but while that's going on I've been re-searching a lot of hobby grade cars and trucks for when I make the step up! Great informational video here!
That's awesome! And glad you found the video helpful :-)
I think I’m going to need to listen to this at half speed! 🤯
Very informative video, many thanks! Last time I was playing with RC cars was about 30 years ago - still remember by Picco P5 (F5) engine!
I wonder if you might be able to advise - I fried the receiver on a toy car (by upgrading the battery from 7.5V to 8.4... !).
The steering in the car does not have a servo but a motor. Would I be able to control / connect to this steering motor with a standard RC receiver, like the one you have in your video ? Thank you in advance! :)
You'd likely have to hack in a small hobby grade servo to make everything work, but anything is possible!
I don't have a proper rc but when I get one, I'll be sure to come to this :)
Please do a video on troubleshooting glitching immediately after installing a spectrum receiver SPMSR6110AT. THIS STARTED during the first time I was binding to my new spectrum transmitter DX5C.
Funny and well explained :)
thanks only man on youtube that told me what i wanted to know 🤠
The only one? Nice!
Great video. Thank you for this. It has erased some of my ignorance. Not your fault I have an awful lot of it.
Haha don't be so hard on yourself! Ignorance can be wilful, but if you're trying to learn, that's just naivety :-)
thx for the explain there was one thing i didnt understand
idk but u got me with the toast one 😂😂❤
jelas penjelasannya..terima kasih
Saya senang bisa membantu :-)
Does the battery with 460amp cam damage the esc with 40a?
Thanks for video. Great explanation. I'm completely new to RC cars. A friend gave me his car to play with. Needless to say I did something to it and now there is a fast red blinking light on the receiver and a faster blinking red light on the esc? No steering or throttle. I saw a loose plug from the battery and an open open port (on the receiver) and thought it should be plugged in. Next thing I saw was a little bit of smoke come out of the fan...after that car no go. Please help.
I realised afterwards it was the battery charging cable that I plugged into the receiver while the battery was connected to the car. 😢
Oof, sounds like its time for a new receiver :-/
Do you have any good recommendations of starter kits
I actually learned by myself by taking it appart my rc crawler 😅😅 it was a mess with parts everywhere on the floor
This is the way!
Nice vid
Do you think it's possible to do a full tuto on how to build one from scratch ?
How many Volt does the Signal cable from the Receiver to the esc ?
Is there a kit to convert a Burago Dodge Viper rt/10 1;18 scale die cast into a high-speed RC?
No kit, it would all be custom. But you're good at fabrication and electronics, it could definitely be done. Though it might be easier to start with another 1:18 scale RC car and just try to mount the body.
Great video mate, teaching an old dog new tricks. I bought an HSP Savagery truck and haven`t turned a wheel yet but while familiarising myself with this fabulous little truck I noticed the rear (non steer) wheels toe in a few degrees (noticable to the naked eye) and there appears to be no way to adjust this toe in. Is there a technical reason for the rear wheels pointing inwards instead of them being parallel to each other. The only adjustment I can see is camber/castor. Thanks in advance and will now subscribe to this channel. Cheers mate
If you're yet to find an answer to this after ten months, then here you go now! The reason for toe-in is to help with straight-line stability! Even if you already know this now, I hope people just now seeing this can find this helpful.
I did get an answer but thanks for your effort to reply.@@appleseeds3775
how about the high rate discharge?
What about it?
@@HobbiesDirect I mean, the "C" rating
@@Demolishor17 In short, the C rating is the maximum continuous current output that the battery can maintain. A 5000mAh (5Ah) with a 20C discharge rating has a theoretical output of 100 amps (5x20=100). Go as high as budget allows, but remember a lot of companies have a higher number than true for marketing purposes, so it's best to go with a reputable brand - with LiPo, you get what you pay for.
Can this knowledge apply to RC plane or is there a difference?
I had to thumb up the video after that first joke. Good video too. I have some broken RC cars my boss asked me to repair. Since I'm an FPV quadcopter pilot, he assumes I know all about RC everything. I'm trying to learn what ESC, motor, sensored vs non sensored works with what application. I was never into RC cars until I drove one of his that I put back together. They are a lot of fun. I have rear end gear boxes disassembled, motors with what feels like bad bearings, an ESC that draws enough amps when a motor is plugged into it that it trips the overvolt protection on my power supply. However the motor runs just fine when plugged into the car that I got running. 4 of the same cars so everything is interchangeable. RC cars is another rabbit hole I'm diving into.
if you're still looking for answers i recommend you hop on reddit and ask away on there.
Any recomendation set to start with , I ve Reely Model 12811b ,is it good to start with ? can i buy this set to start with ?
Haven't heard of that car, but we think the XLH 9125 is the best beginner car on the market :-)
hobbiesdirect.com.au/Xinlehong-110-9125-Sprint-LWB-4WD-Electric-Off-Road-RTR-RC-Monster-Truck-9125N
Nice 👍
I want to know how they designed the Transmitter circuits that emits the control signals and how the receiver decodes it and control the directions of the wheels.
Good question
Hi , a question:
Spektrum DX6C ( of maybe DX5C ) is compatible with my possible future Mini-z MR04 EVO2?
I also do model flying, I have a lot of Spektrum Rx for my DX8, can I use them for the DX6C ? e.g. Vince
It's out of the subject of this video but can it be possible to use those rc engine sound module in electric bike, so when you turn the throttle it will sound likewise? If yes then please explain the wiring. Because in rc cars that module is connected to second channel for changing its sound of engine while we rotate the throttle in the remote control.
No idea about the wiring of an e-bike, but i assume it would be possible if you could get the sound module to read the throttle position of the bike.
I am totally lost...The ESC has nowhere for the motor to plug into it at the box itself. I have to use the red and black leads (which are the same type connectors). As well if I do this, then there is nowhere to plug into the battery and the connectors on the battery are different from those on the ESC anyway. I haven't even gotten to the servo yet...I have no manuals to refer to as well. Can anyone help?
What ESC from what brand are you referring to?
So does the recieves get all the inputs for both the Steering servo and also the Gas/Reverse(brake)? and then sent it towards the Servo and for the gas/brake to the ESC--->Motor?
Depends on if the receiver has a built in gyro or not, and if the esc is compatible. A separate gyro will go in between the receiver and servo/esc, intercepting the signal before passing it on.
Transmitter -> Receiver -> Gyro -> Servo/ESC.
@@HobbiesDirect oke but what does a gyro do? And so whats giving the signal to the motor to go forwards and backwards? I umderstand the reciever sending it to the servo to steer... but what gives the motor a signal to go then?
Your finger on the trigger/stick gives the signal for the motor, the same way as you turning the steering gives the signalto steer. A gyro senses changes in rotation/yaw/direction, and adjusts the steering/throttle to try to keep the vehicle pointed straight.@@STRIMIX
@@HobbiesDirect yes i understand the finger trigger gives the signal.. but what the first thing to recieve tjat signal? The reciever? Then from the reciever to the esc then the esc powers the motor?
Yep! That's why they call it a receiver🙂
@@STRIMIX
where can i buy this parts?? what the of every part in aliexpress?? thanks
How do I program a circuit board to install commands such as turn left, turn right, accelerate??
That's way outside of our wheelhouse, probably best to ask an electronics programmer.
So say i want to go for a full motor set up, using that same control set up, but when i turn the wheel, say to the left itll supply more power to the right wheels, and less power to the right wheels, can i set my ESC up like this? Wanting to create a centipede like racer
You'll likely need a dual motor, dual esc setup with a radio set to function in tank steer mode. We have a video of the Dumbo RC controller being set to tank steer mode on the channel 🙂
Yess yes video watched I used to play with control remote cars grate to remover that for sure right now .. 💯💡
Blitzy caught me off guard, defintely had to laugh.
Curious. If I wanted to run power tool batteries, Is there a step down I need for the extra voltage? Or does this automatically step down?
I’m new to this. I don’t use 12v tools so I have concern for the extra voltage. I’d likely use nominal 18v batteries.
I’m just considering something for my nephew that runs off of tool batteries.
You'd need a speed controller capable of running that voltage. 18v (5S) isn't very common in the rc world, so you'd need a 22.2v (6S) capable ESC. These are usually quite expensive and are associated with high-power large scale cars that usually do upwards of 50mph. If you want to use drill batteries, I think there are some cheaper toy-grade cars out there.
Thank you
Need some help please, iam new to RC cars.
I have a brushless ftx carnage and my son tried to connect the charging cable from the battery into the visible ports of the receiver (etronix pulse 3 channel receiver). Channel 1 and 2 is used. From what I can see channel 3 which is still available is where he's tried to connect. Silly thing, it wasn't starting so he saw what looked like a male and female connection and tried connecting. There was a spark and some smoke. What has he fried? The receiver? I just bought a new battery but still not working. The car doesnt respond at all to the remote control, Appreciate any advice
Im new to rc. Just built a tamiya grasshopper but it does move in a straight line forward. Ive adjusted the steering trim but it still does not go forward in a straight line. What can i do to fix it? Thanks
You should try manually aligning the steering by adjusting the length of the steering tie rods.
Lol, that was a great video, thanks mate. "I see all" 😅
Eventually, Blitzy plans to consume the entire internet.
where could i get the whole sistem, but without buing an rc car?
good info but I was looking more for an explanation of all the different options you hear like 2s 3s lipo nickel etc.
Does servo makes your rc car faster?
So here I am sitting, considering using my 3d printer to make a rc dumper truck from scratch. I have no idea about anything RC related and im a tiny bit above avarage in cad drawing and designing stuff to print. so this can be fun! (we all know im gonna fail misserably)
All i think i know, after watching this, is that i need a battery, an esc, motor to drive the wheels and 2 servos. one for steering and one for tipping the dumper. Then i guess i also need a 4 channel reciever and controller to boot? 2 channels for the servos and one for the esc/motor. But what If i want lights aswell? A light module that get put in another channel?
Yep! RC led kits usually just get run off a spare channel in the receiver. Good luck with your project :-)
I got a vintage rc car and I've tried tweaking the frequency but when it get the right one or I think I do every switch in the controller only send one signal, how could I fix this? I really wanna get that car running bc besides that everything else is in great condition
Vintage crystal-based radios can be temperamental things! Your best best would be to take it to someone with experience in vintage radios, or update it to a modern 2.4GHz system.
is there such a thing as a ready to install kind of set up? rather than having to buy all the parts separately, is there some kind of electronics kit that just has everything in it ready to be set up and installed?
sorry if this isnt there clear on what In trying to say, I actually dont know how to word it correctly
There's this:
hobbiesdirect.com.au/Kyosho-Electronics-set-with-2.4Ghz-3ch-Transmitter-Receiver-ESC-and-Servo-82145
But as there are so many combinations or setups and not all components are compatible or suitable for all vehicles, electronics kits are rare.
@@HobbiesDirect still, this is some thing to work from, more then I could find out my self, thanks
Thanks, i am going to remake my lego model of an rx7 fc into an rc car and thought of using arduino for controls, i see that rc cars have a normalised parts specifically made for this so i will do that i lnstead
Thanks
i didnt quite understand how a proportional steering system works can anyone explain to me?
My son was given several rc cars that dont have remotes. the rear tires wont spin so its difficault for him to use these at push cars (he's 2 yrs old) is there anything i can do to remove the gears in the rear end so he can use it as a push car?
Just like you said - if you take the gears out of the gearbox, the car should freewheel :-)
Gonna make a circular slab that I just stand on and ride around. It’s gonna fail but it might be fun
🎉where can l find those components
Links in the description :-)
I’m looking to build a remote controlled lawnmower using a power chair and it’s motors. Anyone know where I could get the information I need for what servos and electronics I’d need?
I’m trying to get as much info as possible.
Maybe hit up some electronics forums? Control wise, you'd likely need two ESCs - one for each side of the chassis, and a radio system that can do tank-steer.
Great video, can anyone help me with the calibration of the neutral, throttle, break e.t.c. with a surpass hobby esc such as the one used here that does not have a second button ? The one called calibration button !!!!
What transmitter are you using
@@darrellcuellar7861 the ABSIMA CR2 SV2
Great explanation.
I have an issue when my speed is turned up between maybe 90-100%, the car wants to reverse under light throttle. The same is true for steering. If I just barely turn right, the car will register it as turning left.
Any idea wth is going on? My kids are tired of racing the neighbors' Traxxas Stampede at 80% speed 😢😆
The car is the Bezgar HB121 buggy. The radio is just about the simplest trigger and wheel style with steering trim, speed trim, aux and reverse steering options.
Thanks for any info!
Not familiar with that brand or the radio that comes with it, but I'd guess the radio itself is causing the issue. Blast out both potentiometers with contact cleaner, and see if that helps :-) If not, it might just be a case of cheap electronics.
@@HobbiesDirect will do! My bet is that you are correct in either case lol
Recommend transmitter and receiver for 60volt motor
The radio system has almost nothing to do with the motor; it just sends a throttle position signal to your speed controller :-) FlySky gt2 is a good basic radio.
Hey guys, I have a Arrma Felony. Anyone know a good drag set up for it. And a good 8s combo
Hey, i am going to up grade a rc that i have for a long time, but he is more like a toy, you know like every part is made from hard plastic, the suspension is pretty basic, the engine is really bad but his structure is just like a crawler, and i want to up grade him so do you have any tip to my case?
Oh and, one thing that bothers me is that he don't have any ESC, servo at all so i am not sure if it would work well on him
Sounds like you'd basically be custom making everything - might be easier to just buy a crawler chassis and try to make the body fit 🙂 @@fbi4574
@@HobbiesDirect yeah i will try to buy a new one, thanks
Hello , how can I reach out to you for paid consultation
I’m thinking of building a giant RC car that I can actually sit in 🔥 it doesn’t seem difficult at all to make. I don’t know why people haven’t thought of this before
So like...a car?
@@HobbiesDirect yeah but RC version
@@chickenandchips8802 wy? lmao
Can you provide the link to buy these stuff
What were you after in oparticular? You can see everything on www.hobbiesdirect.com.au
@@HobbiesDirect My team is participating in Robo soccer that's Y
Thanks alot for the link buddy😁😁
@@mehulkini9384 Nice, break a (robotic) leg!
Bro are your services available in India too ?
@@mehulkini9384 Just Australia...for now.
Hello, I have a RC car with a crystal 5 (RX) 26.740. The controller is missing. What controller can I buy, those programmable ones that I can use with this car? The car brand is Nikko, probably a 10 year old car, but I don't want the OEM controller, I would like to buy a better quality one.
You'd very likely have to change the receiver as well; it's virtually impossible to get old rx crystals, especially ones that will work with a oem car. If the car has a combination esc/rec (likely), you'd have to swap in a new esc as well.
Have you ever used a graphene battery?
I'm a beginner who want to start the hobby how should i start?
But Also some of the Controlling Car Motor's would heat up
DC Motor i think
I'll find a new hobby!
I’m ‘merican, and DEFINITELY not rational.
;D
AMAZING video - INSTANT like and subscribe. Infinite thanks for this education; cheers!
:D
got a brushed motor with 12t going to put a 11.1v 5000mah lipu battery in it is that too much?
In short - yes. That motor will get super hot and burn out quite rapidly. It'll be very fast for the 3 minutes it will run though 🙂