Great to know the actual ratios, i used the 370 to upgrade my mn99s and it now has plenty of torque and climb really steep angles. However the pay off is that the top speed is severly reduced to a slow walk. This is why my next trail truck i want with high/low gear select.
You forgot to mention the wpl gearbox is counter rotation meaning it eliminates torque twist on throttle preventing load on one side of the suspension. I would want the the wpl gearbox but it is very rare online on cost basically the same as 2 speed wpl so i chosed the aftermarket 370 gearbox which is way cheaper🤣
I swear by the 370 single I use one in my semi one on my 5kg dump truck and can hual 9k my lowboy trailer has one to work in tandem with the semi tractor unit and I'll be beua duel 8x8 370
I get all of what you are saying, I just have a question. These results are asuming that both motors have the same rpm before the gear reduction. I have found out that you can get 370 motors in different rpm. Did you measure rpm before reduction? Thank you.
No bro, you are right both gearbox should be test using same motor rpm. But the gear ratio of the gearbox aftermarket single speed has a higher torque, this gearbox is great to parter a highspeed motor. The silver motor has high rpm than the black one. Some seller of aftermarket motor don't put the details.
Pwede ba rektang palit na from 180 to 370 motor na aftermarket? Hindi na kelangan palitan yung stock na ESC? WPL C24-1 RTR yung nabili ko. Balak ko mag upgrade to metal parts tapos ito sanang 370 motor.
Great to know the actual ratios, i used the 370 to upgrade my mn99s and it now has plenty of torque and climb really steep angles. However the pay off is that the top speed is severly reduced to a slow walk. This is why my next trail truck i want with high/low gear select.
Pop in a 3S battery, and if your ESC can take it
i can watch your videos all day
Thanks bro
@@morrisrc it's really help me decide, for sure
I normally don't like robot voice videos, but this one was actually helpful lol
My friends said too. Next time I will not use text to speech hehehe! Thanks for the feed back and for watching.
Fuck robots!!
Very informative video. Wish I could figure out a way to put a reduction gearbox on a 2 speed transmission!! I appreciated the video!
Thanks bro
hi! I thought the same thing, so that is one of the reasons that I went for the Portal axles. 2 to 1 reduction.
I mounted the brushless to the single speed and it is insane but it's a sensorless motor and is clogging I think I need to get a card and reprogram
You forgot to mention the wpl gearbox is counter rotation meaning it eliminates torque twist on throttle preventing load on one side of the suspension. I would want the the wpl gearbox but it is very rare online on cost basically the same as 2 speed wpl so i chosed the aftermarket 370 gearbox which is way cheaper🤣
Yeah bro very expensive and it is only available in wpl website.
I swear by the 370 single I use one in my semi one on my 5kg dump truck and can hual 9k my lowboy trailer has one to work in tandem with the semi tractor unit and I'll be beua duel 8x8 370
Do I need a gearbox with this if I'm gonna use it on a rc 110scale crawler chassis
Bro, that is too small for 1:10 scale. Wpl c64 jimny can be.
Great vídeo thanks 👍
Thank you also bro
Very good video! Excellent information.
Thanks bro
Great information. Thank you
Thank you bro
Great comparison!!!
I get all of what you are saying, I just have a question. These results are asuming that both motors have the same rpm before the gear reduction. I have found out that you can get 370 motors in different rpm. Did you measure rpm before reduction? Thank you.
Never mind, I understood that gear reduction has nothing to do with initial rpm.
Correct me if I'm wrong, both of the motors you have on the video would be rated at around 13,000 RPM correct?
No bro, you are right both gearbox should be test using same motor rpm. But the gear ratio of the gearbox aftermarket single speed has a higher torque, this gearbox is great to parter a highspeed motor. The silver motor has high rpm than the black one.
Some seller of aftermarket motor don't put the details.
Yes bro
Very informative!
Salamat bro
so which is better?
In terms of torque, If using straight axle 370 all metal single speed. If using portal axle the other one is fine.
Very informative bro.
Salamat bro, sa 2speed tau ha? Hahahaha! 😆😅🤣
Sir bumili ako 2speed gear box..para mn99 ko..nag tataka ako..ung ikot ng gulong ko sa harap pa abanti sa likod nman pa atras..bakit kaya
Anong 2speed metal o ung plastic version?
idol hindi po ba masisira ung stock motherboard ng mn99s kapag 370 motor with gearbox ang ilagay?
Sa una bro ok sya pero katagalan humihina at di na kaya, pero subukan mo lng. Un kasi naeexperience ng iba.
Pwede ba rektang palit na from 180 to 370 motor na aftermarket? Hindi na kelangan palitan yung stock na ESC? WPL C24-1 RTR yung nabili ko. Balak ko mag upgrade to metal parts tapos ito sanang 370 motor.
Hindi kaya ng electronics ng c24-1 si 370 single speed gearbox bro.
@@morrisrc salamat. bibili nalang siguro ako sa official site ng wpl nung res-v3 nila para safe.
Napansin ko mas mabagal ang 370 single speed motor compare sa 180 motor ng wpl c24 ko, normal lang pala since more torque and low speed
Yes bro. Mas malaking motor mas mabagal pero mas malakas ang torque. Kapag nagcompare naman ng the same size motor sa rpm naman nagkakatalo.
pwedi ba mag 2 speed gear box sa original na free transmitter ng wpl?
Bro, kung may 3rd channel ung tx rx pwede ka mag 2speed. Si 3rd channel kasi ang mag activate ng change gear.
Nice 😊
Thanks bro
❤❤❤❤❤❤❤❤❤
👍👍👍
Not “millometre”, it’s “millimetre”…
Yes it's millimeter not "millimetre" 😆
Typo error...
i hate mathematics 🤣
Bwahahahaha! Baklasin mo nlng tapos bilangin mo ung gears mas marami mas malakas 😆😅🤣
7th to comment 🥖🥖
informative content, bro 👍🏻😀
Thanks bro
first bro
Hahahaha! Sunday ngayon nagkakalikot ka? Monday na pala hahahaha!
@@morrisrc syempre. haha