Got mine stable at Min Frequency 3100MHz Max Frequency 3200 MHz Voltage 1150 mV Memory 2764 (actually runs at 2750) go in 14 increments instead of 50. Max Hotspot temp 84C Happy with those temps and power draw 84C is still well below the TJ max temp of 110. Card is a Saphire Nitro+ 7900xtx
Is your frame rates dropping any in a games? Bc everything I've seen is that once you start raising core clocks, the ram speeds drop, and so does fps. Even though it doesn't show the ram speeds dropping. Thanks for any information. Im looking to buy the xfx merc 310 7900xtx.
My GPU has a beefy heartsink, runs 80C hotspot so it's fine. Every model is different so it's personal preference to set the fan curve however you want
With 7000 series the voltage control has an algorithm, even if you set it lower it will boost or lower it self based on its algorithm. You cannot keep it on a fixed voltage
Got mine stable at
Min Frequency 3100MHz
Max Frequency 3200 MHz
Voltage 1150 mV
Memory 2764 (actually runs at 2750) go in 14 increments instead of 50.
Max Hotspot temp 84C
Happy with those temps and power draw 84C is still well below the TJ max temp of 110.
Card is a Saphire Nitro+ 7900xtx
thats very good! whats your fan speed set at?
Is your frame rates dropping any in a games? Bc everything I've seen is that once you start raising core clocks, the ram speeds drop, and so does fps. Even though it doesn't show the ram speeds dropping. Thanks for any information. Im looking to buy the xfx merc 310 7900xtx.
With that fan curve you will melt your gpu. 💯 Fan curve is with a resonable reason
My GPU has a beefy heartsink, runs 80C hotspot so it's fine. Every model is different so it's personal preference to set the fan curve however you want
Hey, what about Power Tuning?
Just slide it to the max +15
No undervolting?
With 7000 series the voltage control has an algorithm, even if you set it lower it will boost or lower it self based on its algorithm. You cannot keep it on a fixed voltage
@@ElBlancoBoss well it must do something since it will cause crashing if you set it too low.
And much higher 3dmark results with undervolting
@@ElBlancoBossit’s not fixed, but it adjust the voltage curve. Think of the voltage slider as an offset slider
You don't overclock the 7900xtx like that they are different to the old cards leave the min clock speed at 2400 MHz and just turn max up
Serviva proprio un video aggiornato per la Rx 7900 XTX
hope this one helped :)
Bro why is my gpu hotspot on 103
103 is fine, as long as it's not 110C