Eflite - P-51D Mustang - Cripes A'Mighty - 1.2m - Unbox, Build, & Radio Setup
ฝัง
- เผยแพร่เมื่อ 11 ม.ค. 2023
- bprc.me/P51
bprc.me/3S_2200 | bprc.me/4S_2200
bprc.me/NX8
Help Us
www.BrianPhillipsRC.com
bprc.me/Patreon
bprc.me/PayPal - brianphillipsrc@gmail.com
bprc.me/HorizonHobby
bprc.me/TowerHobbies
bprc.me/Amazon
bprc.me/BuddyRC
bprc.me/RTLFasteners
bprc.me/Solar
Tx & Rx
bprc.me/Tx
bprc.me/Rx
SMART
bprc.me/SmartCharger
bprc.me/SmartBattery
GLUE | CA | KICKER | FOAM2FOAM | SUPPLIES
www.brianphillipsrc.com/supplies
bprc.me/VoltageAlarm
bprc.me/Servo
bprc.me/Forceps
bprc.me/LED_Kit
bprc.me/Iron
bprc.me/Mics
HORIZON
bprc.me/RealFlight
bprc.me/PlaneStand
bprc.me/330S
bprc.me/230S
bprc.me/150S
bprc.me/150FX
bprc.me/InFusion180
bprc.me/A10
bprc.me/AeroScout
bprc.me/AirTractor
bprc.me/Apprentice
bprc.me/Beechcraft
bprc.me/CarbonCubS2
bprc.me/CZ_Cessna150
bprc.me/CZ_Cub
bprc.me/Cherokee
bprc.me/CirrusSR22T
bprc.me/CitationLongitude
bprc.me/Commander
bprc.me/Conscendo
bprc.me/Draco
bprc.me/Duet
bprc.me/EC1500
bprc.me/Eratix
bprc.me/Extra300
bprc.me/F14
bprc.me/F15
bprc.me/F16
bprc.me/F18
bprc.me/F4U_Corsair
bprc.me/Fw190
bprc.me/Habu
bprc.me/Maule
bprc.me/Opterra
bprc.me/P39
bprc.me/P47
bprc.me/P51
bprc.me/PT19
bprc.me/Pitts
bprc.me/Radian
bprc.me/RV7
bprc.me/SportCub
bprc.me/SU30
bprc.me/T28
bprc.me/Timber
bprc.me/TwinOtter
bprc.me/Ultimate3D
bprc.me/UltraStick
bprc.me/Ultrix
bprc.me/V900
bprc.me/V1200
bprc.me/Valiant
bprc.me/Vapor
bprc.me/Viper
FMS
bprc.me/FMS_A10
bprc.me/FMS_ASW17 | bprc.me/HH_FMS_ASW17
bprc.me/FMS_BAE_Hawk
bprc.me/FMS_Beaver | bprc.me/HH_FMS_Beaver
bprc.me/FMS_F4U_Corsair | bprc.me/HH_FMS_F4U_Corsair
bprc.me/FMS_Flash
bprc.me/FMS_Fox | bprc.me/HH_FMS_Fox
bprc.me/FMS_Futura
bprc.me/FMS_Maule
bprc.me/FMS_Moa | bprc.me/HH_FMS_Moa
bprc.me/FMS_P40
bprc.me/FMS_P47
bprc.me/FMS_P51
bprc.me/FMS_PA18
bprc.me/FMS_PC21_Pilatus | bprc.me/HH_FMS_PC21_Pilatus
bprc.me/FMS_Pitts | bprc.me/Pitts
bprc.me/FMS_Rafale | bprc.me/HH_FMS_Rafale
bprc.me/FMS_Ranger | bprc.me/HH_FMS_Ranger
bprc.me/FMS_SkyTrainer | bprc.me/HH_FMS_SkyTrainer
bprc.me/FMS_SU27_J11
bprc.me/FMS_T28
bprc.me/FMS_Yak130 | bprc.me/HH_FMS_Yak130
bprc.me/FMS_Zero
TOWER
bprc.me/TH_ASW28
Arrows
F15 bit.ly/33BP9Xs
F4U Corsair bit.ly/3mCrjRJ
F86 bit.ly/3rdtttV
BAE Hawk bit.ly/3pSmp4v
Bigfoot bit.ly/3oyKrlz
Edge bit.ly/3dt9rUT
Hawkeye bit.ly/3dvC0AW
Husky bit.ly/32lxCCu
P51 bit.ly/3bgcH8l
Pioneer bit.ly/3GhbN5w
Prodigy bit.ly/37zJxzt
T33 bit.ly/3DuVOPp
Tecnam bit.ly/3wVIqUk | bit.ly/3CYD2TY
Trekker bit.ly/34jhgLZ
Viper bit.ly/3uinxlD
Marlin bit.ly/3AThncQ
Dancing Wing
PT17 bit.ly/3H5B3Nu
Storch bit.ly/3iZsatV | bit.ly/3LSYT0y
Stick 14 bit.ly/3y2HWLU
XFly
A10 bit.ly/3oUxF10
GlaStar bit.ly/3BwE9Xx
J65 bit.ly/3EpgpoR
Sirius bit.ly/3apzHhf
SU27 bit.ly/3PqTIpK | bit.ly/3QGqa8G
T7A bit.ly/3oLy7ic
Dynam | OMP bit.ly/3mcU0Ew
E110 bit.ly/3yVniit
E120 bit.ly/3OOmlOi
E160 bit.ly/2DXmEGU
E200 bit.ly/3RemwEd
K123 amzn.to/2EerkpG | bit.ly/3PKg5r6
K124 amzn.to/3bqGF9F | bit.ly/34BaZXP
FW200 bit.ly/3LVXu9Q
ASW28 bit.ly/2VlLtBm | amzn.to/3A8D5bS
Phoenix Evo bit.ly/3Q4gSU4 | amzn.to/3nX4okg
A380 amzn.to/3OviGE3
747 amzn.to/3EREOVC
787 amzn.to/3J3Fppx | bit.ly/2y3C1e9
Spitfire bit.ly/3smaEWE
BF109 bit.ly/3rlrUen
T28 bit.ly/3398xse
F4U bit.ly/3h3OhNI
P40 bit.ly/3OTlUSK
P47 bit.ly/30hZiqN
P51 bit.ly/2JQDtDj
F16 50mm bit.ly/3Kga0Av
F18 50mm bit.ly/3mm9xSY
#rc #airplane #p51
You are so lucky Brian ! LOL Cheers from Canada - Love your channel - you keep it light and informative - I learn so much from you each time ! Thank you 👍
i did buy the p-51d and i gave in and got an NX8. Your videos are friggin amazing and have tought me so much ty ty ty
I really want this same plane I looked at the rerelease and it was approved on my birthday. Also love y’alls jokes that get thrown in.
Brian- just ordered this and the eflite corsair through your youtube site. Been watching you for quite some time. Thank you for the extra effort you go through for your channel!
Thanks Jeff! Glad you're getting some value out of it, and you will LOVE these planes! Watch the P-Factor...it'll sneak up on you!!!!!!!!
You have a great wife there to have your stuff all over her kitchen! Thank you for the video . I ordered my P51 the other day and sure excited to get it !! .I enjoy your videos thank you for the helpful tips!
Thanks Mark, and I sure do!!!! She's amazing, and I'm so blessed to have her in my life ;)
As for the P-51 - amazing plane, you'll LOVE it!
@@BrianPhillipsRC I have a question before I buy the p51, Can I use a 3S too (without underpowering it)?
I appreciated that you went a little more in depth on radio setup this time tbh...I'm starting to play with mixing now so thanks for the little tease on that lol! Shutting off the annoying battery warning made up for it 😁
Love Your work BP.
The Maiden show was da Sheeeeeeeeeee already!
Only You Mate.
Brian it’s much easier to pull plane out of the box if you open both sides . The vacuum won’t hold it from sliding out. It will slide out like butter. Awesome looking bird. Might have to get me one some day. 😊.
I would do anything just to get that plane. I freaking love that plane I have the June ninth P 51 but I really want the blue nose!!!!!!!😍😍😍😍😍
I thank you and the camera crew for your super video as usually. And I think that you should say yes to a ix 14. But it’s the difference big comparing nx 10 . You have to think about the people that are new to this hobby, and learn from you setup . Because and don’t think you gone get a new to this hobby by a ix 14 . Thanks again. Martin
ordered using your link thanks for the makin the setup easy. I was wondering how far back or forward you place the battery to get the cg right
Figures...I finally found all the parts I needed to repair my June nite. It's all the same except for the livery and now it comes with an AVIAN ESC, so Hello Reverse thrust.
I just wanted to say thank you for helping me with the Carbon Cub S2 you video helped out tremendously. I just had a question to see if you could answer for me. I am a newer pilot and the High and low switch on the DXS what does it do?
Beautiful P-51 and amazing video as always! Sorta got my curiosity up keeping the screen outta camera view till you got the New Model popped up, "Think it's gonna be released" ......
Hummmmmmmm.... 🤫🧐🤔
Brian, first, let me say I find your help videos some of the best I've ever seen. You have a unique way of incorporating important additional information as part of your presentation. A good example is now you can slow down the Utube voice speed via the settings (I never knew that!). I am setting up my second Eflite airplane (I'm an old builder of RC models that at age 75 have decided to buy them assembled these days!) I've been following this P51 assembly and my question has to do with Thrust Reverse. Since I'm using an NX6 transmitter and only have Aux 2 reserved for AS3X/Safe I must move to an 8 channel transmitter to enable Thrust Reversing. Is that correct? Again, great video's which are greatly appreciated!
My box should arrive on Tuesday 🤓 Just to find somewhere to fly it now !
AWESOME! Go for it!!!
@@BrianPhillipsRC FINALLY flew it yesterday, was very odd doesn't look bent but had to ride left aileron way too much to keep it flying. Wondering if I had CoG miles out so I'm re-watching your vid : )
Oh yeah!!!!!
I can't remember the Ace's name, but he named all his planes that and was in several theaters of war.
good catch camera crew…distorted batt tray due to over tightening straps causing binding.
the way the prop is pointed down and to the side on RC stuff, I was wondering is that the same on full scale ?
George Preddy is ace who named his planes Cripes... Shot down by friendly fire. Should've been Yikes So Mighty!
you mention the radios... I've yet to step up from my DX6i , and am debating the NX8... which planes have you used up all 8 channels?
Hello Brian. Which one do you like more, this on or Arrows 1100mm. Thank you!
I purchased this plane and love it! I noticed I’m getting total voltage telemetry for the pack on non-smart batteries too! I looked for an update for my other ar631’s. Is this a version 2 or something? I don’t see updates for my older 631’s that include this feature. Just hoping to pick your brain. Thanks!
You will get NOMINAL VOLTAGE, just not cell per cell - and then it does the math for an estimate too in the Telemetry screens.
Nice flying as usual Brian, great film work too, also as usual. One comment on the plane: doesn't that prop look a little small to be scale?
Kooks in the Lab find the perfect medium.
Rip it off an use 12x12, sounds amazing and chunders the air We breathe.
Vroooom Mate!
This Is my 1st BNF Model and watching you set this up seems like a lot of work for me being a noob. My Q: Are there profiles all ready set up I can use for this plane?
Glad I came across this channel I've never flown planes before only drones would this be easy for a beginner to start off with to learn how to fly?
Cheers
You COULD, but it's not as easy as some other choices. This would make a better 3rd or 4th plane, in my experience, which was similar for me, but this has SAFE (Auto-Leveling) in addition to (AS3X) stabilization, so you'll have an easier time than I did when I first got my Blondie (3 liveries ago, and only had Stabilization at the time, no auto-leveling).
That all being said, if you already fly drones, you'll have some of the "Basics" down...just you have to KEEP flying forward with a plane, which can be a HUGE change for drone pilots.
This is kind of our copy and paste "beginner list", but might help you put your finger on your own pulse, and see where you land (yes, pun intended - lots of "Dad jokes" around here, please forgive me)...
OR, you can just jump in with two feet, if budget, and skill won't be a huge issue for you...
bprc.me/P51 - You want the 1.2m - NOT the 1.5m - the bigger is a LOT harder to fly, which is somewhat counter-intuitive in the fixed wing world...
bprc.me/Tx - I suggest the NX10 for a semi-experienced flier who THINKS they will stick with it for a while...then you're not chasing good money after bad to buy the "entry level" stuff that you have to upgrade for your 3rd or 4th plane (this is super annoying, and expensive, of course).
2200 bit.ly/3aUgpo8 - you can use 3S or 4S, but if you're like me, you'll defer to the larger pack. you can also use a bigger capacity pack, if you wish, but these 2200mah 4s 30c packs will serve you well....but you might already have some from your drones, if you're dealing with 2200 or similar size packs. Shoot for 4S for best results.
S2200 bit.ly/3b2wp7y - This charger will get you where you need to be up to 6S, and you'll LOVE how easy it is to use.
Beginner list
Description | Purchase | Videos
Habu STS 70mm RTF | bit.ly/3ci5eWD | bit.ly/3ontBF9
Apprentice 1.5m RTF | bit.ly/3BlSjh9 | bit.ly/3b6kCVP
Carbon Cub S2 1.3m RTF | bit.ly/3PqNR4A | bit.ly/3J6WmQ3
T-28 Trojan 1.1m | bit.ly/3PmbxHf | bit.ly/3v8zGJi
Apprentice 1.2m RTF | bit.ly/3BlSjh9 | bit.ly/3Bk60wG
Sport Cub S2 UMX | bit.ly/3yYkrUs | bit.ly/3PL8vfJ
AeroScout 1.1m | bit.ly/3OlqyYQ | bit.ly/3ztp9Li
Trekker 1.2 RTF | bit.ly/34jhgLZ | PNP bit.ly/35xOPu8 | bit.ly/3PHoZ8M
Bigfoot 1.3m RTF | bit.ly/30mYdOq | bit.ly/3zqIxZu
Pioneer 620mm RTF | bit.ly/2YotgbY | bit.ly/3OvJLad
Prodigy 1.4m RTF | bit.ly/37zJxzt | bit.ly/3cvccaZ
Ranger 1.2m RTF | bit.ly/3bHFIKr | bit.ly/3bCezZB
RC Simulator bit.ly/3aWiW19 | bit.ly/3h9StjB
USB Simulator Interface Wireless DSMX Dongle bit.ly/3ztFZK8 | bit.ly/3h9StjB
@BrianPhillipsRC Thanks so much for the reply. I appreciate it ..I'll have a look thru the list you sent and work out which one would suit me best to start with 👌.If you ever want to head to Japan and fly, let us know more than happy to help out .. Cheers again mate ..
I have the iX14 - it has already gone back to Horizon/Spektrum for issues with ghost screen movement and OS issues. I'd suggest that if most of your base is on NX Platform - stay with that. I am keeping my NX10 - until I get back to trusting the iX14. It is VERY different (Android OS) but much simpler to set up new models. My $.02. HNY!
Ever try ELRS?
Very sweet Brian. I love the P-51, but I'm curious, how you would stack this 1.2m up to the P-Eflight 51D Mustang 1.5m, obviously bigger, fly's bigger, but maybe the handling of the 1.2m is better?
Yes, ..... better.......better......better........better.......better.....!......!.......!.......😁😁
Always been leary of those computer radios...I'm an electronics idiot! I've watched you set up that NX 8 so often...I now think I could pull it off! Much easier watching than trying to understand a manual! I only have a DX4e so I'm way overdue for an upgrade due to flaps and retracts. I can fly one without flaps. Problem I have is most likely never will have the money to invest in said upgrade due to bring retired and trying to survive on Soc. Sec. The hobby is becoming too expensive for me to continue. I do enjoy the learning though!
brian im tore between this p51 or the xfly a-10 love them both would love your recommendation im in canada and horizon hobby does ship to canada love you guys you have taught me so much
P-51 all day long. A-10 is amazing, but I haven't even flown the A-10. If you want an A-10, we've done a few, and the Eflite OR FMS options ARE AMAZING! (Can't speak to XFly just yet...but fixed gear...really????)
XFly A10 bit.ly/3oUxF10 (this one is Twin 50mm)
Eflite A10 bprc.me/a10 (this one is Twin 64mm)
FMS A10 bprc.me/FMS_A10 (this one may be available in Canada soon, and it's HUUUUGE twin 70mm)
@@BrianPhillipsRC p-51d it is the xfly a-10 doesn't have flaps or even a rudder wth? guess its yank and bank on that one lol not really into it the a-10 from eflite is purrrrrrfect love it eflite ROCKS
My next plane 100% But as controllers go I'm not sure I would ever give up my TX16xmkII
I've heard good things, but haven't used one, so I can't say. My only expereince with OpenTX was with the T8SG, so a far cry from the TX16.
What up😃😃😃😃🌞
I have a question. What's the difference in binding with safe select enabled vs not enabled. Just asking because I see you binded it witout safe select but in the programing of the switch for as3x, off, safe it seems like safe select was working
I don't even know if you can do it that way anymore. GREAT QUESTION THOUGH! The manual seems to claim we can use bind plug to do the "OLD METHOD" but I just use FORWARD PROGRAMMING all the time now. I apologize for not knowing the answer to this, in whole, but I suggest you just bind it normal, then use FORWARD PROGRAMMING to turn on SAFE, if you wish to assign it to a switch.
@@BrianPhillipsRC no problem! Your videos have helped me so much and I appreciate it. You and camera crew are doing a fantastic job with the videos !
thats what cats do, I didnt find anything annoying didnt even notice .
Hey Sir, long-term viewing first time messaging.. love ya work & assistance but wanted to ask are your P51 landing flaps loud like mine, like the servos doesn't shut up.. & what are those reversed pliers to unclip the linkages?
Much Respect & love from Perth Australia, West Coast Baby 😂
Oh say, the Camera Crew is Awesome 👌
If they're LOUD, check for binding. They get louder at the end of stoke (full landing flaps, OR fully retracted) but you still don't want to heat up that little tiny motor by over-driving them. If this happens, you can from OFF, idle the surface into it's position to squish the foam a bit (over-bend it into home or down position a BIT) OR trim the foam if you really want to get aggressive. Make sure the linkages are clear of the foam at full deflection too.
Yeah, the camera crew is amazing!!! thanks
will you to try the tx 16s radio
Megan and I have been debating it for a few months now!!! IX14 vs NX10...we may end up with both so we can keep "training" people who need help with the NX, but I really want the extra channels of late - we've now run into 3-4 planes where we could have used the extra channels.
What size are the screw for the horizontal elevator??
I wish I could tell you. Very sorry, but don't know.
Question if you have time. I have a grass field only. Had issues getting this plane to take off. It kept dipping the nose into the ground as I tried to take off. I have many other planes (commander, ultimate 3d and a bunch of umx) that have no issues on this run way. Any suggestions on why the p-51 is so nose heavy to take off. I even moved the battery further back then it should be with no better results.
It is tricky. Try holding the tail, and pushing it a bit to help it get rolling, if you're okay with such a thing... the other option, that DOES work, is to bring a large bed sheet, or similar, and stretch it over a short section of the grass, and staple it down. This will give you a STARTING PAD. Might be enough help to fix your issue.
You can also buy WEED BARRIER and just roll it out, then staple it down, same thing. The "real" fields use Geo textile fabric, if you're curious, but you may already be aware...it's real pricey!!!
@@BrianPhillipsRC Thank you Brian, I've Been know to hold a tail or two so with that experience we will see. I will keep you posted on my success. Grateful for the tips.
The livery is an actual war plane his confirmed plane take downs on the side the white marks on the blue I think his name is also on the plane by the cockpit
Oh look, another Mustang. Cool paint though.
My p51 is brand new the motor surges after about 1:00 to 1:30 of run time do you know what that could be?
WOW! Battery is bad, not fully charged, or you're in the throttle 100% for the duration of that flight.
1) Try another battery FIRST, if you can.
2) If that doesn't work - make sure the battery charger is good - seriously, this could be hiding in plane sight
3) Next, check your ESC settings for LVC. You can do this in your Tx similar to how we setup REVERSE THRUST...only you're looking for another value. If it's too HIGH, you could lower this setting, but I don't think you should NEED to do this. I bet your battery is kaput.
Good luck, and hope it's simple!!!
what company do you work for to get free RC planes and stuff
But my P 51 was on the wall and it fell because the cord broke holding it in so I need a new one but it’s like 300 and I don’t have that money 😞
How much did it cost?? US and Canadian??
There's links. I can't say how much it would go for in Canada. I know it's CRAZY up there from the conversion rate, and the VAT - gotta love "FREE" Healthcare ;)
Horizon Hobby >>>>> bit.ly/3ohT4zT
Could a beginner fly this plane
I had one WITHOUT SAFE and AS3X when I was on plane #3 (or 4????) ;) So, Yes, BUT I also did a LOT of crashing with mine to be fair ;)
My tail wing spar did not go in easy. 😅
At least you got it in ;)
@@BrianPhillipsRC 🤣 drilled it. Added LEDs
anyone else yell at on screen Brian to take the box off the stove? 👀
Nope lol that's where he puts it in EVERY unbox, build, radio setup video
@@deandagner I learned to filter it out long ago!
No...
Never paid any mind to it
Wrong!!! There's a big difference between the Dx8 and the Dx10 even with the $40 battery.