ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2020
- This video will also work on the GMC Sierra, Yukon or Suburan of the same years 1992,1993, 1994, 1995, 1996, 1997, 1998. It will work on the 1999 GMC Suburban, Yukon and Chevy Tahoe. They didnt change until the 2000 model year. Hope you liked the video. The link to the lights is below. Enjoy. If you can hit that like button and subscribe. Not a sponsored Video. The sealight product has held up for a week since this was filmed with no issues. If I run into an issue I will update this and make a new video.
www.amazon.com/SEALIGHT-Headl... - ยานยนต์และพาหนะ
![The Wall Song ร้องข้ามกำแพง | EP.202 | ตั้ม วราวุธ / เบสท์ คำสิงห์ | 18 ก.ค. 67 [1/5]](http://i.ytimg.com/vi/cwIoA7XHqnE/mqdefault.jpg)
I just bought these for my dually. Those t10 bulbs lower corner turn signal lights I got the AMBER T10 led bulbs. It looks fantastic. Great job on the how to video. Helps out alot
Great video and so clear. Your little partner did a great job for a kid👍. I did my high beam with leds but had to adjust them downward to use as low beam until I got the low beam 2006. Once I install the low beam this week I will have to adjust the light height so it will be normal again. Yes, led upgrades are amazing. Just be cautious on which leds you use because I've heard and seen for myself how the back of the leds get extremely HOT 🔥. These of course were dodge vehicles I heard and seen where it started to melt the back of the housings a little to where the bulb was loose. On newer vehicles don't forget to use canbus and load resistors to prevent flickering or possibly overload to the leds. I have noticed this on dodge vehicles and also newer vehicles. You can find led headlights with the box like shown here that have all of that included so an easy install. Hope this helps. Remember, you get what you pay for when it comes to leds. Do the research and you should be fine. Happy upgrading everyone.
Awesome video. Thorough run thru. Very well explained. Thank you for posting
If you do this you will love driving at night again in your truck. Best mod I have done to a vehicle. Thank you for the comment.
Thanks! Bought the same brand LED for my '99 GMC Suburban, and it took 10 minutes to change them out.
They are still working on a couples of my trucks and I love them.
I replaced my yellowed headlight housings/lenses with some jazzy prismatic housings and ordered a set of LED bulbs. Wow, what a difference. This week I'm going to install a relay and set up the wiring so that when the high beams are turned on the regular low beams stay lit. I don't know why they made it so that the high & low beam lights alternate but want all 4 lights on when I hit the brights.
Did you ever do it?
You did this video at my speed. That was exactly what I needed.
Glad it was able to help you. Thank you for the comment. I appreciate it.
upgrading to LEDs in my 98 , its has been years since changing a headlamp in my chevy . Saved me lots of time just knowing i need a 5mm socket lol
Great upgrade I did this on my wife's GMC Acadia I wish it would have been this easy
Makes it nice to drive
Pretty simple installation looks great 👍
They are so nice to drive with.
Thx for the video , great job !!
By the way look up the video to stop that annoying door chime . I pulled mine out . It's so so so simple.. and I also pulled out the fuse to my Day time running lights .
Thank you. I will have to do that. Thanks for the comment.
Excellent video bud. Much appreciated. I was only gonna do the high beams on my wife's Tahoe, but might need to do both. And thanks for showing the comparison of the lights side by side. A huge difference
I have not tried them out in fog yet, but I love them and see so much better at night. Thanks for the comment and support
Very Informative video and straight to the point would you please send me a link where I can get the same exact brand thanks
Goto Amazon and type in sealight 9005 and 9006 bulbs
Lighting is a big deal! I upgraded my lights on my accord big difference for sure! Great video!
Thanks so much for the comment. Lights are a huge part of driving comfortably at night. Gives you confidence
@@NVSRides You're welcome bro! Yes they are especially for these up coming months where it gets darker early. Confidence is a must with lights! That's why I changed them before the change in weather as well.
Thank you!! I just got a 96 chevy and wanted to change the lights and this video helped tremendously. Thank you
You are most welcome. Thanks for the comment.
@NVS Rides another question sir, did the lights hold up? Any problems with the Led lights?
Thank you sir
No they are still going strong. Just bought another set for a 99 suburban.
Missed your beautful k1500 on the channel love it
Thank you so much for the support and comment
Thanks a lot for this video and tutorial. I just received and installed the LED bulbs and I can tell a huge difference. Thanks for sharing the order details also, AutoZone was gonna hit me for $200 for the same bulbs. Very informative. Thanks a lot 💯
P.s. your cameraman did an awesome job as well! Peace!✌️
Thank you for the comment. It really makes you feel like you are safer while driving. Glad you like them as much as I do. Mine are still going strong today.
Yes sir, absolutely!
I must be a Rip van winkle when I went to the parts store for head light bulbs they were $50.00 These new halogens are impressive I have a 94 and 95 same color will upgrade.Thanks
I really love them. They are still going strong.
Was wondering what size socket bolts are?I found their 3/16 dont know if that's the socket size though, Well check
I'm doing it to my Suburban which is just like yours white even down to the fender guards/extensions. Thank for the video 👍
Gonna put some hikari bulbs in my truck thanks for the vid
Let me know how you like them. Thanks for the comment.
They look great. Time to change your turn signal lenses! They are only $10 a piece.
Great job guys!
Thank you so much. If you get them you will love them.
starts 5:25 just twist the light in normally and plug the plugs together. done
Just wish the LEDs weren't so freaking expensive.
They are not too crazy. I think these lights range from on sale below 50 bucks to 60 bucks. They are still going strong today.
Wow what a difference, I need a set of them in the wife’s Tahoe lol 😆
You might have to. They make night driving way better. Thanks for the support and comment.
70$ per side or for both sides.
Thanks for posting
Yes that was for both sides. Thanks for the comment.
@@NVSRides thanks
More obs suburban videos would be great 👍 amazing video
I will see what I can do for you.
Great job sir
Thank you for your time in leaving this comment.
Nice work, and help from your buddy... get anybody giving you the "high beam" flash ?
Not yet but I am sure they will.
Mine are the same ones, they aren't that bright. But wow the old ones were SO BAD. Replaced all the lights with led and the assemblies around the truck.
Very simple to do
Good looking out Burning Rubber!!!!
Thank you so much for the comment.
I just got a 98 chevy, this helps a lot. Thank you. Is there a new link for the light builds?
It was at the bottom of the description but it looks like they must have come out with new ones or something. You will love them.
Thanks for the video, can you tell me where you purchased these lights?
Awesome! My only question is how you turned the lights off lol my 98 running lights are always on if the ignition is on but I’d like to Shane that if possible.
Just push the parking brake down just a little. Not enough to engage it the brake but that will shut them off. If that doesn't work you will have to try one of the other options.
Pretty simple install
Simple install but big gain driving at night.
Cool
i saw this video was posted a while back, are the headlights still working good? i’m considering buying these for my husbands truck. his is a 1998 chevy k1500 with the original lights & grill as well.
I freaking love these lights and with it dark so early they are getting used a lot. I love being able to see better when I drive. Have yet to drive in heavy fog though.
@@NVSRides i finally revived them in the mail! & he is gonna love them! Thank you!
I am so glad that came. He will for sure love them
How do botón lights come off same way or different
So what exact model did you get? I have the exact truck you have.
I have a 2000 classic obs Chevy. They were made in 2000.
Just found your video. Nice upgrade. Unfortunately the link doesn't work anymore.
Sorry it was not sponsored by those lights have been good by the sealight brand. Just look up the brand and search by your vehicle and you should be ok.
You did not have to align the lights after yo make them even again ?
So can you replace the housing like this without having to take the grill off? I am doing this myself and not a mechanic!!
Yeah the headlights come out.
So I don’t have to take the whole
Grille off?
nice job but expensive bubbles
That annoying beeping (chime) can be easily removed by pulling out the fuse for it
one of my bolts are not wanting to come out, what is your suggestion
I had that happen on a different vehicle but was able to get the normal/low beams in. It is in one of my newer videos. Usually the plastic breaks and just spins with the bolt so you would need to grab it some how and undo the bolt.
I need to change my 92 chevy's headlights
Any complaints with these bulbs now after a year?
Not one. I bought them for my suburban as well. They can reflect on fog more than the factory yellow ones did.
What can you do when the 5mm bolt just keeps spinning?
It doesn't loosen.
Try just pulling up and out on it. Might already be loose but just not able to be pulled out easy
Same issue with mine, they just keep spinning. They're soaking in wd right now and I'm just going to try yanking and pray to God they don't snap.
I love this old truck but I need lights to plow up in Minnesota!
My bolts were rusted into the fixture so I'm taking the grill off and removing the four bolts out that actually hold the headlight in place. Not super difficult but just a little extra time.
Lights are bright now though 😎
Well how do I make it not spin cause nothing in doing seems to get that damn screw off
You would have to grab it with some needle nose pliers or something to hold the bottom while you turn the top
I just installed LED headlights. in my 99 Tahoe and any time the key is turned on, even if the headlights are off, they are on... Very dim but, still on
That is your daytime running lights.
Push your parking brake pedal down just a little bit and they usually go off.
@@NVSRides I don't have daytime running lights... I guess I do now. Would it help if I put a resistor on them?
How many come in the box (2 or 4)?
All 4 came in this set, but some come with only low beams or hi beams.
How are the LEDs and drivers holding up? I feel like a lot of times, especially with AC LEDs the ac/dc converter is what actually dies.
And these are so bright you probably won't even have to clean the UV haze off. And will spend less time and not much more money!
Interesting I never thought of that storage compartment being a location for a second battery. Which I'm guessing some diesels might have? I use it for my tie down straps to have handy and half way clean if I need them.
Leds are great. Have not had one issue with them minus people flashing their lights at me thinking my brights are on. Thank you for the comment.
2 yrs later.. how have those bulbs held up?
They are still working great. I have them in a few vehicles now with no issues
Thanks for the reply. Can you send link, description link is expired
i have them in my 2001 f150 and im going to be buying them for my 1996 k1500 great video! thx
They keep changing the link. Just search by brand.
It is amazing the difference they make in driving. Really good way to stay safe.
I can't get the screw out...any suggestions? Just spins...
Wat did you do ? I have same issue
Eventually you just need to pull up they are tight.
Or you can just take the whole front grill off and on boat the entire headlight housing as it gives you more room to hide the wires and use wire loom.
The link doesn't work
Why’s his son got finger nail paint?
She is a girl 😂.
The BIG question is how long will they last?? Never been impressed with Chinese products.