Showcasing the lift and drop speed of my Advantage 4 post Lift as well as how the automatic wheel stops work. www.advantagel... newageproducts... #lift #garagebuilt #ford
Thanks for the video! You are the only one I could find that shows the lift operate in real time. I just ordered the Advantage SS-11000-WD for my home shop. I choose this model because it can do everything up to dually trucks, and comes with the 240 volt motor, which I am hoping helps it to run just a little bit faster. Even if it doesn't, it should have a longer life span than the 120 volt motor. I like overkill...
I have the same lift, but the XL version. Seems like mine raises much faster then that. I will need to time it as a comparison. Great to see a video of a full demonstration of the lift.
I think they should be the same as the specifications state they both have the 1.5 HP 120 V motor. I like the XLT version, I would have got it if I had a bigger garage.
Yes this seems slow. I imagine your XLT is faster, even being taller. I install a LOT of lifts both residential and commercial. I also have done tons of the Advantage products. We actually did a side by side today. The motor in this video is surely slow. Not by much, but slow. And it’s not a HP issue. It’s all in the valving. Something is a hair off either in the pickup valve or possibly the tube or startup valve? No matter a 1.5hp 2hp or 5 hp the speed up and down is all valving. It’s kinda like a transmission in that way. The 1.5 just works a little harder from and energy consumption standpoint and has a 10 min cycle, meaning it should only be run full rise a max of once every 10 min. This is why commercial shops sometimes go with a 240vac 5hp motor. They can cycle much more often before getting warm.
The speed of the lift is not dependent on the voltage or horsepower of the motor. It is dependent on the GPM (gallons per minute) output of the hydraulic pump which is the same regardless of voltage or horsepower. Motor RPM will increase GPM but again, voltage has no effect on motor RPM. It is a very nice lift; I am considering the XL version for the shop I'm building.
The limitation is amperage. Residential 120V circuits are usually limited to 1500 watts. 12 amps, because derating 80% of 15 amps. But 240V circuits routinely allow 50 amps, so about 8 times more power. More power, more GPM.
how much does a lift like this one cost, and can I put one on one side of my garage if the garage is only 17 feet wide? Do you think it would block the access of the second car (an SUV)?
Can someone help me please? 1) Can you suggest any proven methods of installing such a lift in a garage that has a slope of at least 4-5 inches? 2) Also, would the lift shift if I don’t bolt it to the ground? (I would rather not anchor it as my concrete slab is only 4 inches thick.) Last question: 3) Is 4 inch thick concrete floor even enough to to support the lift with the vehicles? I would appreciate if you could please answer all or at least some of my questions🙏
thats a pretty steep slope. you cannot level the lift itself to the posts and would rather require you to shim under the base plate with suitable steel or heavy duty rubber pads to level it out the best you can (check with Advantange on tollerance for slope). 4" of concrete is more than enough for a 4 post and it does not need to be bolted down unlike a 2 post.
It’s a 4 post, they don’t have to be. They come with casters so you can move them around. They recommend bolting them down if you’re in an earthquake prone area.
Great car lift , but do not trust ramps staying in place with weight of safety plate . Ramp kicked out on my 2020 GT350 knocking off my back end , $600 damage.
It's great to see the actual lift time. Most videos speed up this process. Great video!
Got mine yesterday. Me and wife put it together and had it running jn 5 hours. Already love it
Thanks for the video! You are the only one I could find that shows the lift operate in real time. I just ordered the Advantage SS-11000-WD for my home shop. I choose this model because it can do everything up to dually trucks, and comes with the 240 volt motor, which I am hoping helps it to run just a little bit faster. Even if it doesn't, it should have a longer life span than the 120 volt motor. I like overkill...
I have the same lift, but the XL version. Seems like mine raises much faster then that. I will need to time it as a comparison. Great to see a video of a full demonstration of the lift.
I think they should be the same as the specifications state they both have the 1.5 HP 120 V motor. I like the XLT version, I would have got it if I had a bigger garage.
Yes this seems slow. I imagine your XLT is faster, even being taller. I install a LOT of lifts both residential and commercial. I also have done tons of the Advantage products. We actually did a side by side today.
The motor in this video is surely slow. Not by much, but slow. And it’s not a HP issue. It’s all in the valving. Something is a hair off either in the pickup valve or possibly the tube or startup valve?
No matter a 1.5hp 2hp or 5 hp the speed up and down is all valving. It’s kinda like a transmission in that way. The 1.5 just works a little harder from and energy consumption standpoint and has a 10 min cycle, meaning it should only be run full rise a max of once every 10 min. This is why commercial shops sometimes go with a 240vac 5hp motor. They can cycle much more often before getting warm.
Gorgeous lift, garage and of course... car.
Love it.
It seems like the back left was sticking a little, have you tried waxing the posts. Nice lift
Perfect lift for home use! Thanks for sharing! Happy New Year! 👍👍
Hell of alot faster then putting the car on 4 jack stands
God I want one! I wish I had bought the non Ali cert model at only 3500 bucks 2 yrs ago
Recession coming.... They will drop a little.
Sound like the locks are firing at different times.
The speed of the lift is not dependent on the voltage or horsepower of the motor. It is dependent on the GPM (gallons per minute) output of the hydraulic pump which is the same regardless of voltage or horsepower. Motor RPM will increase GPM but again, voltage has no effect on motor RPM. It is a very nice lift; I am considering the XL version for the shop I'm building.
The limitation is amperage. Residential 120V circuits are usually limited to 1500 watts. 12 amps, because derating 80% of 15 amps.
But 240V circuits routinely allow 50 amps, so about 8 times more power. More power, more GPM.
This type of motor has only one speed. 3600 rpm. Constant.
Hydraulic pump GPM depends on its vanes and is given at 3600 rpm.
Ford Lebanon has a GT500 CFTP in the showroom now.
Eric called me about that car.
how much does a lift like this one cost, and can I put one on one side of my garage if the garage is only 17 feet wide? Do you think it would block the access of the second car (an SUV)?
Nobody reads people's comments on this channel :(
You should be able to put a 220v motor on there and double the speed. Does advantage sell any?
That is sweet
Can someone help me please? 1) Can you suggest any proven methods of installing such a lift in a garage that has a slope of at least 4-5 inches? 2) Also, would the lift shift if I don’t bolt it to the ground? (I would rather not anchor it as my concrete slab is only 4 inches thick.) Last question: 3) Is 4 inch thick concrete floor even enough to to support the lift with the vehicles? I would appreciate if you could please answer all or at least some of my questions🙏
thats a pretty steep slope. you cannot level the lift itself to the posts and would rather require you to shim under the base plate with suitable steel or heavy duty rubber pads to level it out the best you can (check with Advantange on tollerance for slope). 4" of concrete is more than enough for a 4 post and it does not need to be bolted down unlike a 2 post.
I keep having issues with my rear locks not releasing
The lock rods probably need adjustment
@@EnthusiastsGarage Do you have to pull your handle down rear hard to release the rear?
@@czwhat328 no, once the locks clear the posts I have a good amount of clearance. I had to adjust mine one and now they are perfect
I will try and adjust mine this weekend and see if it works better. Thanks
thanks for all the useful information. did advantage install that for you or you hired a local installer / did it yourself.
Advantage
@@EnthusiastsGarage thank you. How much was the installation cost? Or was it included.
@@SRG7796 $1200 for delivery and install.
@@EnthusiastsGarage thank you
Is there a reason why the lift is not bolted to the floor? found other comment that explained it
It’s a 4 post, they don’t have to be. They come with casters so you can move them around. They recommend bolting them down if you’re in an earthquake prone area.
For the track size yours looks like its wider what is your track size. My car is 80 inch wide I am scared it will not fit.
I have a widening kit, bumped it up from 75 to 83
@@EnthusiastsGarage thank you for replying so they sell the widening kit or did you get nd it from another company?
@@dedricbullock5567 they sell it but you have to ask for it.
Great car lift , but do not trust ramps staying in place with weight of safety plate . Ramp kicked out on my 2020 GT350 knocking off my back end , $600 damage.
Who did the install for you? How much total?
The lift company, $7300.
Here is a link of me lifting my Advantage SS-11000-WD with the 220 volt motor. th-cam.com/video/KrdH1hqmSKI/w-d-xo.html
slooooow
It doesn't look like it's even bolted to the floor.
It’s not, doesn’t need to be. It comes with casters to move it around.