@@yoamal1187 the ender 3 is $200 and the reviews are pretty good, I don't know if it's big enough for a full helmet but you can always split the model into various pieces
I'm in love with these guys, when they got on screen I got shivers. I made a 3D print just like yours and am so glad you made this video. It was informative, detailed and easy to follow. Thank you! 💕
@@dat1kid763 @dat1kid well firstly, if you aint got money how can you afford buying a bunch if 3d prints? And then we got time, you dont need to do any labour, the printer does everything for you. You do have the sanding and painting parts, but you would've needed to do that if you bought the print anyways. Skills: there isnt alot to it really, and you have youtube and every other source on the internet to guide you (like this vid). Tools: most 3d printers have tools included. All you need to buy is some filament, sanding paper, primer and paint. Patience: you just set it off to print and go watch some netflix, game or whatever else you usually do. Motivation? If you're not motivated about printing it yourself and painting it you need to realize that you wont be motivated once you find out that you need to sand and paint it yourself. Not wanting to: well its your choice, but its a waste of money buying a print for 100$ when you can print, sand, prime and paint it yourself for like 50$ you do realize thay the print you buy you have to paint and all that. The total cost would probably be like 150-200$ if you bought it..
Turned out so nice! Makes me wish I had a printer that big to make helmets! (I know you can split prints into multiple pieces but I've done that and the seam lines were HUGE...like an inch).
Only 2 things I'd recommend as an alteration are: 1 Epoxy/ fasten the visor with something better than duck tape. 2 More of a preference, but 2K clear coat by Spray Max. It is a bit more expensive than Rustoleum 2X, but the coating hardens and cures between 24-48 hours (warmer temps for quicker cure times) and you get a high gloss finish that will protect your work for years
They are the children of the cultist on the Sith moon that’s why they are called Sith troopers apparently they lived in those Star destroyers from Endor to TROS
Nice! Highly recommend wet sanding the filler primer next time. SO much easier, and little to no dust. It makes the whole process less infuriating, in my opinion. Also, for your clear coat, can't recommend enough 2K Max Gloss, it's an automotive 2 part clear coat in an aerosol can, and it gives an insane level of gloss as well as hardness, pretty much exactly the same stuff that's on your car. You can wet sand it, buff and polish it for a perfect gloss finish, just like the troopers have in the movie. It's available on Amazon. Cheers!
From what I understand, they were top of the First Order and were declared as Enforcers, better than Deathtroopers and protected Snoke himself. It was like being a covert unit when it came to High Detailed Escorts, to taking Temples from the Resistance. They were also considered force sensitive and had much knowledge on any Jedi that were unfortunate enough to cross their Platoon. (Mind you I could be wrong, since they were variations of other cloned bounty hunters)
Spoilers if you haven’t watched the rise of sky walker or the last Jedi: I think ur thinking of the praetorian guards in Snoke’s chamber in the last Jedi. Those weren’t sith troopers. Sith Troopers were members of the Sith Eternal cult that resurrected Palpatine, among whom were people who served his original galactic empire. Many of them were trained as stormtroopers for the Final Order fleet Palpatine secretly had them building on the planet Exegol, where he was hiding. The Sith Troopers themselves were just the equivalent of regular Stormtroopers in terms of their role within this new empire (I say “empire” but they technically never got the chance to take over any planets before the resistance defeated them), albeit supposedly better-trained and with better armour and weapons. There was, however, a variant of the Sith-Trooper that did act as Palpatine’s royal guard, known as the Sovereign Protectors.
@@GalacticArmory Dude you just make me think in buy a 3d printer and make this helmet, I believe so by the time I get it and finished the helmet maybe you will have the files for the full armour...Nice job
This is Awesome! Great job. What type of 3D Printer did you use?! I plan on buying all your plans but I want to make sure the prints come out just as awesome as yours bro!
For this helmet, you mention the website for the 3D model in the description. Do you use 100% scale for the standard model fit ? I will start the print and follow your guide but want to be sure to know if I need to scale it first for a standard adult head or I can use it directly? Greet video!
Spoiler: they’re only in the movie for 2 minutes total (that’s only 4x longer than Luke in episode 7)
I hate you
Bob Bob mmmmmmmm funny joke that was
Cheeki breeki Blyat 69 not really a joke, but thanks anyway master yoda
@@BobBob-qg4lo shut up bob
You are the most raw form of a Star Wars fan
Would love to see more Glossy Clone Trooper helmets...
“Shinies” ;)
"Looks like we've got a couple a shoinies"
" shinies sir?" " yeah, your armor, its shiny, like you"
Lilrobi45 Xxx shiny and new,, just like you
This is the best comment section
@@GalacticArmory How long did the helmet take to print and how much filament did it use
Holy crap that helmet is beautiful!!!!
When he says that anyone can do this mask
Him:plasma 3d maker
Me:I don't have that
@@Jacob-rm6ze even a ink printer.
@@Jacob-rm6ze cool mask, I'm looking forward to more projects of Star wars helmet's 😀👍
He sells the printed pieces, so you don't have to spend $200 on a printer
@@The_Wosh that printer is 200 dollars? Danm that is cheap for that size of printing
@@yoamal1187 the ender 3 is $200 and the reviews are pretty good, I don't know if it's big enough for a full helmet but you can always split the model into various pieces
Should do a shore trooper or an old scout trooper! Would love to buy one
Planning on buying this to wear to prom lol 😂 Going in sleek red button up, black tie and pants, helmet is a topper
i love how the sith trooper helmet design blends the first order stormtrooper helmet and the old clone trooper helmet designs together
Sith Trooper is awesome
I like the ones from the old republic
@@EchoCT-ef3xu do you mean the royal guard?
@@indreswari4493 He probably doesn't know
YES THEY ARE AWESOME BECAUSE......... they're red.
I'm in love with these guys, when they got on screen I got shivers. I made a 3D print just like yours and am so glad you made this video. It was informative, detailed and easy to follow. Thank you! 💕
You're very welcome thank you for the kind words!
To all the people complaining they don’t have a 3d printer: He sells the raw 3d print on his shop.
He is a hero for that
Why buy 3d prints when you can buy a 3d printer and print anything you want?
@@thegreenpistachio8883 money, time, skills, tools, patience, motivation, or just simply not wanting to
@@dat1kid763 @dat1kid well firstly, if you aint got money how can you afford buying a bunch if 3d prints? And then we got time, you dont need to do any labour, the printer does everything for you. You do have the sanding and painting parts, but you would've needed to do that if you bought the print anyways. Skills: there isnt alot to it really, and you have youtube and every other source on the internet to guide you (like this vid). Tools: most 3d printers have tools included. All you need to buy is some filament, sanding paper, primer and paint. Patience: you just set it off to print and go watch some netflix, game or whatever else you usually do. Motivation? If you're not motivated about printing it yourself and painting it you need to realize that you wont be motivated once you find out that you need to sand and paint it yourself. Not wanting to: well its your choice, but its a waste of money buying a print for 100$ when you can print, sand, prime and paint it yourself for like 50$ you do realize thay the print you buy you have to paint and all that. The total cost would probably be like 150-200$ if you bought it..
@@thegreenpistachio8883 well maybe you don’t want a lot of helmets, it’s just a one and done kinda thing.
Please make the armor, I love the sith troooper
Evan Veres Adidas Trooper
@@RedWyvernRising When I saw the sith troopers I totally had flashbacks to Adidas trooper, bless his heart
I love you too.
@@abstract4164 ???
To bad the were hardly in the movie 🙄
Meanie beanie
I was disappointed that they didn’t have a bigger role too, they were pretty much just pretty storm troopers, not advanced troopers
Smitty Plays STOPSPOILING
Why are you watching a video that will definitely be jam packed with spoilers?
360 Edge yeah me neither
Yesss! The video I’ve been waiting on !!! Great work
This is by far some of your best work.
I know not many people like Sith Troopers and they aren’t very important and they didn’t have much screen time but I love their armor design
I wish they were in the movie longer they seemed really cool.
Turned out so nice! Makes me wish I had a printer that big to make helmets!
(I know you can split prints into multiple pieces but I've done that and the seam lines were HUGE...like an inch).
6:01
It came out really good👏🏼
Don’t you think there is a expensive budget (3D printer)
Shadow_ Cash it’s the best way to make it sadly. Any other way takes much more effort
*an
Bob Bob the grammar first order (grammar Nazi)
I saved up some cash for a few months and bought a Ender 3 that was half off
@@the_l0ne_hunter156 just don't get a 3d printer, waste if money
Damm. First clone armor, now this. This is a real step up
Sith Troopers served the Final Order. Not the First Order. Rad helmet!
I have been a fan for a while. Keep making these awesome videos!
*grabs red nail paint paints it over the first order helmet * yes so original
Best helmet by far
Love your videos! Would love for you to cover the inside of your helmets more though! Like any padding/straps etc to make sure they sit nicely etc
Interesting idea!
I really want to do something like this later down the line.
Only 2 things I'd recommend as an alteration are: 1 Epoxy/ fasten the visor with something better than duck tape. 2 More of a preference, but 2K clear coat by Spray Max. It is a bit more expensive than Rustoleum 2X, but the coating hardens and cures between 24-48 hours (warmer temps for quicker cure times) and you get a high gloss finish that will protect your work for years
That's a pretty good first order sith trooper helmet awesome.
you should put some foam in it to make it not wobble on your head the way it is
Looks HIGHLY accurate, realy cool!
Looks good man amazing how accurate it is and it looks comfortable
I actually saw this product on amazon and that’s how I found u great build
They are the children of the cultist on the Sith moon that’s why they are called Sith troopers apparently they lived in those Star destroyers from Endor to TROS
You need to make this a full armor set
That helmet looks sick!
Awesome helmet remake dude!😆👍🏻
Helmet came out looking great!!!
The troopers served the final order. However we can't blame you since this was made a few months before the movie when we had little info.
Fantastic work man, well done and thanks for sharing 🤘🏼
Nice! Highly recommend wet sanding the filler primer next time. SO much easier, and little to no dust. It makes the whole process less infuriating, in my opinion. Also, for your clear coat, can't recommend enough 2K Max Gloss, it's an automotive 2 part clear coat in an aerosol can, and it gives an insane level of gloss as well as hardness, pretty much exactly the same stuff that's on your car. You can wet sand it, buff and polish it for a perfect gloss finish, just like the troopers have in the movie. It's available on Amazon. Cheers!
From what I understand, they were top of the First Order and were declared as Enforcers, better than Deathtroopers and protected Snoke himself.
It was like being a covert unit when it came to High Detailed Escorts, to taking Temples from the Resistance.
They were also considered force sensitive and had much knowledge on any Jedi that were unfortunate enough to cross their Platoon.
(Mind you I could be wrong, since they were variations of other cloned bounty hunters)
Spoilers if you haven’t watched the rise of sky walker or the last Jedi:
I think ur thinking of the praetorian guards in Snoke’s chamber in the last Jedi. Those weren’t sith troopers. Sith Troopers were members of the Sith Eternal cult that resurrected Palpatine, among whom were people who served his original galactic empire. Many of them were trained as stormtroopers for the Final Order fleet Palpatine secretly had them building on the planet Exegol, where he was hiding. The Sith Troopers themselves were just the equivalent of regular Stormtroopers in terms of their role within this new empire (I say “empire” but they technically never got the chance to take over any planets before the resistance defeated them), albeit supposedly better-trained and with better armour and weapons. There was, however, a variant of the Sith-Trooper that did act as Palpatine’s royal guard, known as the Sovereign Protectors.
Very nice finish!
Really nice finishing great work.
Woo its fantastic!! do you have plans to make the full armor?
Thank you! I'd love to but not until the movie is out and more accurate files become available
@@GalacticArmory Dude you just make me think in buy a 3d printer and make this helmet, I believe so by the time I get it and finished the helmet maybe you will have the files for the full armour...Nice job
@@cspulpo I hope I do!
When will you have more? You're already sold out online and I'd really like to buy :c
Will be relisting shortly after Christmas!
Galactic Armory yay
The helmet: is 3D printed in red already
“Oh I don’t think so”
You should make all the 1st order helmets. Storm trooper, flame trooper, jet pack trooper (i think that's what its called), etc.
What settings should I use I’m using a ender 3 beautiful build by the way
HAIL THE FINAL ORDER
Wow !!! Good job 😮👏👍 very nice!
Bro that’s an insane helmet that’d be really cool to have
Excellent video as always. Thank you very much.
Pretty cool design. Wish the new stormtroopers looked like that. But I'll always prefer the imperials
3d printing is cool🔥🔥🔥
You should do a full sith trooper armor 👍
I love your work man
What is the size of the filament used I've been interested in a 3D printer
Top 10 Star Wars Character that didn’t get enough screen time:
10. Maz Kanata
9. Grand Moff Tarkin
8. Greedo
7. Sith Troopers
6. Captain Phasma
5. Admiral Ackbar
4. Mace Windu
3. Darth Maul
2. Wicket
1. Boba Fett
Boba Fett needs more screen time, he’s the best character!
Just looked at the shop, I’m about to give you all my money now 😭
Sith Troopers... The first troopers I ever saw that actually could aim. But it was so rare that they had to die 15 minutes after they emerged :D
I would love to get one of these at some point
So this is where I got my helmet right?
I do not have a 3D printer because I kind of do easy DIY until now I really want one
@galactic armory what were your print settings for this helmet to print it without support on the inside?
I am asking myself the same question.
I’m making one now, 3 hours into the large part
this is beautiful
This is Awesome! Great job. What type of 3D Printer did you use?! I plan on buying all your plans but I want to make sure the prints come out just as awesome as yours bro!
Amazing work😃
Who agrees with me that this man deserves way more subscribers than just 34k. Help this man to get 1,000,000
Woah, Michael Phelps got into 3D Printing!
will you be making any more of the sith trooper helmets?
The empire needs you
This looks really cool. I liked them in the movie, but I will be unable to make this thing.
Good job anyways.
Yo whatever backing track you were using was funky as fuck
I am about to buy a 3d printer. Do you recommend the ender 3
Sick ass helmet ✊🏻
Love the helmet good work!
Could u make a full armor set of this
Hi! Everything you do is really cool! Can I buy a collapsible helmet, and I have already painted and glued it myself?
Beautiful work
I see it:
I instantly:I WANT THAT HELMET
Would you be able to make a full armor suit?
I would buy it because it looks amazing
But I can't rip
This mask is so cool
What’s a good 3D Printer that you recommend buying? AMAZING videos BTW
That is awesome work
you should use a little bit darker red
Amazing absolutely amazing
That is the best character to play as in star wars battlefront 2 cuz of the gun
I love the shirt 😂
I thought u were actually gonna make it not just easy 3d print but paint and the rest is really good
0.04 Final order
For this helmet, you mention the website for the 3D model in the description. Do you use 100% scale for the standard model fit ?
I will start the print and follow your guide but want to be sure to know if I need to scale it first for a standard adult head or I can use it directly? Greet video!
After watching this again, I just realized that the line underneath the eyes were completely ripped off on mine when I received it.
So I don’t see the 3D files for purchase in you website. Will they be available soon? Thanks
Can you link to where you get the visor material. I've done a couple different helmets but I can't seem to find a good visor material.
The sith trooper worked for the first order more like the worked with them. They serve the sith
You mean the final order
@@Aki_777j He means first order
@@caleb1505 he means the final order
@@cookiesnugglez7318 ???
@@caleb1505 what does ??? Mean?
are you ever going to make a sith jet trooper helmet?
question, do you use any adhesion? maybe a brim, or skirt or is it just the supports?
woowww!!! amazing helmet!!