How to LS swap 95 OBS (PART 2)
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- On this video I'm showing how to LS SWAP your 88-98 OBS. There are many ways and different combination on how to do a LS SWAP but at least you will get an idea of what all you need to do. Like always I'm hoping this helps many people out there and if you have any questions, I'll do my best to respond as quick as I can. Please subscribe and share my videos if you haven't already to help grow the channel and hit that like button for me! Also feel free to message me on Instagram to get a quicker response (Sups_Garage) God bless you guys and I'll see ya'll on the next video!
Add me on Instagram! Sups_ Garage
/ sups_garage
Part Lists
6AN Radiator Transmission adapters
a.co/d/9SkNHz2
6AN Steel Braided Transmission Lines
a.co/d/dsrYF5V
6AN Radiator to Transmission Lines adapter
a.co/d/ggpfihZ
6AN Steel Braided Fuel Lines
6AN Transmission line adapters (Came with this fuel line kit)
a.co/d/ikbDzBP
6AN Return line adapter
www.summitraci...
6AN Fuel Filter Adapter
a.co/d/d1ojc9L
Temperature Sensor Adapter
a.co/d/b9vZFoC
Standalone Harness
a.co/d/hvlVLn6
Mass Air flow Sensor
a.co/d/gGRISXd
O2 Sensors
www.summitraci...
EV1 to EV6 Injector Adapters
a.co/d/1hOYuBY
Spark plugs
a.co/d/1I4Bjm7
Drive Belt
Part# 1105K6
Low Profile Oil Pan
a.co/d/74vpnX6
R4 A/C Bracket
a.co/d/8e0fsQO
Oil Pressure Sensor Adapter
a.co/d/iQX2Auy
A/C Lines
a.co/d/eRThLrd
Radiator Stem Port Fitting
www.oreillyaut...
Shorty Headers
speed-engineer...
Motor Mounts
a.co/d/eKgQcMb
I found your videos because I am getting ready to LS swap my 1996 OBS GMC and my guy this is the most comprehensive video series for an entire swap I’ve ever seen, thank you for taking the time to make these. You are a blessing
Thanks for that brother! I do it for you guys! 😊👍
Thank you for making the best ls swap video I’ve seen on TH-cam
I appreciate that brother 😊👍!
I have a 90 obs I was thinking of LS swapping, these videos make the process seem easier than I thought! I appreciate the videos man!
U should brother u won't regret it and thanks for the support! 😁👍
I have a 90 too! Single cab short bed
I just slapped the 6.0 in mine yesterday. not horrible to get thr engine in. fuel system is simple cooling is simple. the only real pain is wiring but there are guys who make custom harnesses or you can make it simple and go carb if you feel like it
I heard it is easier to go carb brother but I have never done it so I don't have any experience on it lol
This is the best Video on LS SWAP FOR 95 Chevy OBS WELL DONE
thank you! 😊👍
By far the best video I've seen on the swap. Thanks!
thanks for the support brother!
This videos help me a lot to do my swap thanks for share your knowledge brother god bless you
I've been stuck on the wiriring and searching for months for a video with this exact information. Thank you bro.
Hope it gets you where you need to be brother!
@SUPSGARAGE it definitely will. Wiring is my kryptonite. Been stalling for months because I didn't want to mess up this very expensive build. You got a sub for sure.
@sbickmore15 thanks brother! add me on Instagram if you got any questions 😊👍 sups_garage
@SUPSGARAGE oh damn, you're not far from me. I'm in N. Houston if you ever travel for meets or shows I'll keep an eye out.
@sbickmore15 I'll keep that in mind brother!
There are Alignment marks around the shift shaft area of the neutral safety PRNDL switch on transmission. You would shift trans to neutral and align the marks and tighten down the 2 13mm bolts.
Also the 2 plugs Into that PRNDL switch are glued in so it helps to warm the plug area with a heat gun before removing plugs. Do not overheat!!
@JayJay-de8vq thanks for adding that on here brother 🙂👍
@@SUPSGARAGE absolutely no prob! I'm just starting to look at doing an LS swap on my 95 c2500 suburban. The TBI 454 is just to weak with such low compression.
@JayJay-de8vq lol yes I agree that's why to me ls is worth it
Well done man. Straight forward and easy to understand.
Great video very helpful I'm going to swap a 1994
Thanks brother I hope this helps you on ur swap!
If your new at ls swapping buy a vortec truck instead of tbi. Half the process
How is that bro ? Is the 98 vortex easier to swap ? I bought a 5.3 with the harness and transmission for $300 and I’m planning on swapping it on my 98
I have a 96 and I can’t get the power steering bracket to fit
can u send me a pic to my Instagram? sups_garage
Frickin sick!
What the pin out for rpm
Shop didn’t hook it up 😔
Were you able to run the stock 4160e that came in the 95??
I didn't brother. I ran the one that came with the LS to avoid any delays trying to figure out what I'm needing to make them work together.
You don’t need to change driveshaft length?
I did not have to brother it fit right in
Jesus Is King bro Amen
Amen to that brother!!! 🙏👍😁!!!
How’d you get your fuel gauge to work?
You have to make sure you keep all your engine grounds brother. One of them are the ones that ground your fuel pump and your gauge.
@@SUPSGARAGEappreciate the response brother
Great video! Did you use the factory oil pan or a low pro pan?
Thanks brother I used the low profile one brother cuz at the time my truck was at a 4/6 drop
@@SUPSGARAGE Mine is pretty slammed as well. Just wondering if it's going to be a problem.
@danbuildz2054 if urs is 4/6 then don't risk it n get the lowering pan
Did you do a 134a conversion (ac) ?..if so, what did you replaced besides the low and high side hose...i bought a new condenser and wondering if i should stick with r14 or convert to r132a
Mine still uses R12 brother
Ah ok. Thanks
How did you bend the power steering lines, planning on keeping my original lines but could you bend by hand or do you need a special tool
I did it by hand brother just do little by little until u have enough room
Your videos are exquisite very good
thanks brother!
For some reason my ls has a Camaro oil pan and will not bolt up to transmission , stock truck oil pan clear 95 Chevy cross member ?
the stock one should clear it brother
Thank you
Do you have to get a transmission cooler
I didn't mine plugs into my radiator like the original one did and haven't had any issues with it brother
Hey man do you remember how much you torqued the engine mounts bolts(x2) ? And the bolts(4 each side) to engine ? ..loctite?
I didn't use a torque wrench brother just did it by hand lol and I didn't use any loctite
@@SUPSGARAGE Alright, thank you anyway. Happy early Thanksgiving. Hahaha
@MetalSlug270 likewise brother!
@@SUPSGARAGEthank you
My o2 sensors aren’t reading any idea what could be the problem?
which ones did u use?
@@SUPSGARAGE borch brand whatever it’s spelled lol and same plug as yours but not sure why but they aren’t reading
@BryanAlcala-wv6eo I had the same issue then I bought the AC Delco ones on my description and it fixed my issue lol hope this helps brother
Whats the part number for your power steering hose pressure side ?
I don't know brother cuz I didn't have to replace mine
Did the oil pan work out? Reading the reviews on the one you posted does look to good?
Yes it works no issues with it till this day brother
Hey man i just swapped an obs and not getting power to the starter, i did exactly what you did with the standalone harness any ideas
anychance you can message me on Instagram brother sups_garage
Your original heavy purple wire. Mak sure it's on the "S" terminal
Did you have to change cross members or use a a different trans mount?
no I did not have to brother I had a aftermarket transmission mount already but the one from the LS transmission should work just as fine as well
Hey bro, do you have the part number for that oil pressure sensor adapter?
Here you go brother
LS Engin Swap Oil Pressure Sensor Adapter M16 1.5 Adapter to 1/8 NPT for All GM LS Engines LS1 LSX LS3 4.2L 4.3L 4.8L 5.3L 6.0L 6.2L a.co/d/9NQbrFV
@SUPSGARAGE bro you're a lifesaver.
@sbickmore15 Glad to help!
So did you merge the transmission wires togethwr
only the one for the speed sensor brother
Hey where did you get the harness?
Amazon brother if u need the link it's in the description 😊
And which driveshaft did you use
just the orginal one that was already on my truck brother
what trans did you use? 4l80?
Latter generation 4L60E
Clean the bay
I know 🤦♂️ lol
Hey where 7:46 did you get the connectors?
if ur meaning the adapters for the injectors I got them from Amazon
Did you keep OBS pcm hooked up?
yes I did brother
What transmission? Stock 95?
No it's the 4L60E that came with the 03 Tahoe engine brother
You have the part number for the harness on Amazon?
Here you go brother
ZZCSZ LS Standalone Wiring Harness 4.8 5.3 6.0 Compatible with 1999-2006 GM Vortec Engines 4L60E with Adapter Transmissions Complete Wire Harness for Fuel Injection System DBC Engine Harness a.co/d/0F0Ra8T
Also all the other links to the parts are on the description brother 😊👍
@@SUPSGARAGE awesome thanks