Boom! Mine was running fat and bogging down. Thanks to your video I decided to try this before replacing piston/rings. My screen was blocked about 50% less than yours but it did affect the running. I used a propane torch to heat up the screen red an some compressed air to blow out the ash. Reinstalled and ran great. Thanks Again!!!!!
Boom! Mine was running fat and bogging down. Thanks to your video I decided to try this before replacing piston/rings. My screen was blocked about 50% less than yours but it did affect the running. I used a propane torch to heat up the screen red an some compressed air to blow out the ash. Reinstalled and ran great. Thanks Again!!!!!
Thanks so much! My SRM-210 is running like new after cleaning the screen.
I am so grateful that you wrote to me. It lets me know that what little I do really does help. Thanks for watching and be well!
Good diagnosis. Runs great now!!!
Good one David
Good fast diagnosis Mon Ami
Thanks for watching!
What if spark arrestor has been cleaned took the air filter removed for open air and fuel is mixed properly, what could I try next
@@tingsgwan replace the carb or rebuild it if you are able to.
Where is that filter located
On the muffler underneath the exhaust diverted plate.