Thanks. I was able to fix my partner's z flip 4. Her phone was shutting down whenever the phone was flipped. I thought something was loose inside so I watched your video and tried to disconnect and reconnect everthing. After that, phone is working just fine. Thanks, bro!
Thanks, yeah if it was an entirely new design I would have for sure taken it all the way apart, but since its so similar to the flip3 and the fact that other people will post videos on the hinge within a week or two after my video, I didn't want to render the device useless since there usually isn't that many views on my videos to recoup the cost of the device. :)
@PBKreviews great video, none the less. But the Z Flip 2 & 3 screen can be plugged into Z Flip 4 temporarily just to access the info from Z Flip 4? I'm not planning to fix the Z Flip 4, but there is some footage I really need from it 👀 Thanks in advance
Maybe down the road you could show how the hinge assy is installed since lately many users are reporting failures without any type of over use or abuse. with the hinge failure the phone is pretty much unfoldable. Great video should come in real handy for all the bad Flip 4 phones.
Question.... would you know why my z flip 4 disconnects from battery when i close it? It's either getting a short somewhere or the hinge is pulling the battery cable somehow? It only works when it's open. The second i close the phone it turns off and i cannot turn it back on until i open it up again.
My zflip4 would just shutdown when closed, unless it's charging. Gave it to a service center 2 days ago. They said it'll be fixed for free cuz it's under warranty, was told it was something to do with the motherboard. Got the phone back today, it had no more scratches on the body aswell as the screen protector, almost as if the entire phone was new😅. Though I think it's something to do with the battery in the top half of the phone👍 Hope yours is fixed
This was very informative. I can see how both battery capacities add up to 3700 mah. I'm waiting for this phone to ship. Thanks for the info on its internals.
Good video. My other halfs phone has just packed up. It works fine when open but after its closed, it refuses to come back on. If you tap it, eventually, it comes back on. Sent off under warranty and they refused to repair it, saying it had been damaged. It literally hasn't got a scratch on it. Always kept in a case, never dropped. Samsung want £425 to repair. My response this product isn't fit for purpose.
I can assure you that it's the teeny weeny flimsy hinge samsung used on the flip 4. when mine dropped Approx 12-16 inches off the table the fall caused the hinge retainers on one side to shear.. No magnets at the hinge end. That's why I will never own another Samsung flip or fold.
Amazing video ! You are by far the Master of teardowns ! I have a couple of questions for you. How much heat was applied and for how long in order to remove the back covers and what do you recommend for the heating ? Hot air gun or rework station heat gun ? Also, can you point to where the test points are located for model F721W ? Thank you !
I prefer to use a hair dryer. Less of a chance of damaging any components. Just apply enough heat so its hot to the touch and use a suction cup tool to help gain leverage. You can always apply more heat if needed. I don't know where the test points are.
The frame and overall build I would say is good and would last 2 years for sure, but I am not a fan of these foldable screens. I've had them crack out of no where in the crease before and I just don't feel like I would use one as a daily phone without making sure I have some sort of insurance plan on it :)
@@PBKreviews yes indeed, that aluminum frame looks chunky and sturdy but the fragility of that foldable display cannot be ignored...I am one of those primitive fellas who only use one device at a time...and I am a sucker for compact devices, hence I was still using my appalling battery life plagued iphone 12 mini...I have pre-ordered the flip 4....this is gonna be my one and only primary device, so I did make sure to get samsung care+ ....thanks for the teardown...
Always love your disassemble videos sir. Any chance you would consider doing a video on removing or replacing the screen on any Samsung Foldable device?
@@PBKreviews Just viewed it Thanks. I have had all the foldables at some point after they came out and i always wondered how the screen looks underneath! Your Awesome!
Used this video to repair my phone. I found one with a bad esn on ebay and used it to exchange the screen. I just took the motherboard from my phone and put it in the ebay phone. Worked flawlessly and was easier than trying to get the screen off the frame.
Hello, thank you for this amazing video. By the way, Im having a network/sim problem, I tried all the troubleshooting steps and nothing work, so I think the problem is the hardware? Do you know which part do I need to order? Is it the PCB?, Wave antenna? Qualcom x65 modem? Please help. Thanks
Great video, now i know how it looks inside, by the way, can i hace model.or name of the glue remover? I like to remove the glue from macbook pro battery , thanks
Watching from my flip 4 and I love it. But in paranoid about the screen breaking like the flip 3 so many complaints and pictures and reviews of the crack on fold
@@PBKreviews So out of all of these do you know which are the main ones responsible for 4g/5g data. I get "emergency calls only" or "No service" message.
Brother need an advice ..can we replace flip 4 with flip 3 display..my flip 4 display is broken so can I replace it with flip 3 display …? Plz let me know
This is one of the best videos. I was wondering, though, if anyone knows what that's little unused circuit connector on the right side? Im thonking its for repair or data retrieve but its a mystery
Hi, thanks for perfect video, can I ask you about tips wish way possible to buy new screen Samsung Z4 flip - my it was broken after my new phone was fallen . Thank you man.
They sell the outer and inner screen assemblies on ebay but the inner is a bit pricey. If you broke your inner, I would suggest sending it to samsung for repair since their price would be cheaper. Here are some links for example: www.ebay.com/itm/334568591062?hash=item4de5d78ed6:g:ARsAAOSwRLVjLBj2&amdata=enc%3AAQAHAAAAoEgJMboZ%2B20Uf6QV0E2LNB5Qs21bpDpHcTZvz3HfNRXmQu4g79iy0yyM%2FkusIl1vK4lYiL%2FmP0gVa8ua0uDvnYWwMrCTj4pNp3jykHlekgmklPqv66UPNv8vAXQR2SyfST66Fg9tr1LmTyV9tPQcJh30LK2W1K89FbuZdwVKHIlkFBKfG6jUlQW3JkwDT8VKfEx7rHEs8TeT9kKbJGoVnOs%3D%7Ctkp%3ABk9SR6T1x8CHYQ or www.ebay.com/itm/334604966540?hash=item4de8029a8c:g:5mgAAOSwXOBjV8vv&amdata=enc%3AAQAHAAAAoIOmlJqFvhRcdr8tSXjIFpmmGHusSfSvVwHaMYdxUowGnBxo8Tl6TuSSBswTK2adxkTq%2BKk8B%2BBV%2BquuyPkpFlv8ut%2BG60aNBccv2VbCtksAybjlxacJqFJzgsHp1Fes8mzuEcVHVUbXOgJfUQ5pIL38zx8oGe708JfRl31V%2BuDYGh02FfL2kE7lx2YWDd%2FFg%2B4Z8em6kK%2FUpEDfCJaf%2BP8%3D%7Ctkp%3ABk9SR6b1x8CHYQ
Thanks! You can see the teardown video of that phone at this following link: th-cam.com/video/g9fVEGdVT38/w-d-xo.html&ab_channel=%E5%BE%AE%E6%9C%BA%E5%88%86WekiHome . I don't think I will be doing this one, due to the cost vs views I get on these model videos.
Yeah, you would need to cut out the cure in place gasket holding it in place with a razor but you would need to re apply a new seal with either cold glue or some sort of silicon filler to keep water and debris from getting inside the phone as well as potential for the flex moving around and getting damaged.
If you mean the folding screen, you can but since the cable is attached on the bottom to the sub board, it would be more difficult to work with when you cant completely remove that screen to have room to work, on top of the fact you might damage the cable by moving it around a lot.
Here is a link, you can scroll to the ones on the bottom which say service pack: www.mobilesentrix.com/catalogsearch/result/?form_key=qnmj5knRUiVPgs7e&q=galaxy+z+flip+4 or you can search them on ebay etc.
Hello! I'm getting the "Phone temperature is too low to charge" issue, so I was wondering where the temperature sensor is located so i could replace it. Could someone point it out for me?
Thanks! It's not too difficult, its just glued in with a cure in place gasket, so you would need to use an x-acto knife or razor blade to carefully cut the glue around the camera sides and gently pry out the camera.
flip3 is still good? I mean, performance for a wife not so much involved in games etc? resistance to open/close? screen in general? because this is too much $
Yep, well last years both ran off a single cable and connector, but yep there a slot which doesn't have a connector soldered to it on the board. I remember reading somewhere about them moving to one antenna with newer chipsets and so forth, so not sure if they changed the design last minute to go with one instead of two. Another thing I would thing was 2 would generally provide uninterrupted signal where if one was blocked by your hand, the other would kick in, but I guess the antenna is positioned in a place where usually ones hand would not be blocking it often.
On my flip 4 the screen has broken all the way in the middle where is the hinge. Anyone has screen replacement? If yeh 2nd screen ia better? My phone is on screen replacement. Now am hesitating to keep the phone or sell it.
Hey bro, the service center contacted us, they say upon replacement of screen, battery will be replaced as well charging us 63USD for the battery. Do you know the reason for this? Thanks
Sometimes the service centers depending on models of phones have replacement parts which come pre assembled and semi complete, meaning samsung has the parts ready to go so all they have to do is move over the motherboards and re assemble so it saves time and work.
The 3d graphite works just as well as a vapor chamber and as of the S20/Note 20, Samsung has been generally using the 3D graphite in place of the vapor chambers on their flagship/top tier devices.
@@PBKreviews "3d" graphite is just a graphite sheet(the one they use seems low quality tbh, plastic) hq graphite sheets are generally black.., they literally couldnt have cared less about the cooling, damn i have 5 sheets of 500x500 graphite sheets, thats how much i am fixated on cooling, dont get me wrong, it really does matter i think you also know that.
@@PBKreviews theres literally nothing, not even graphite behind the screen..also TIM application on the SoC is quite shitty, what is that, a dot in the middle? LOL they didnt even try..
Don't always be fooled by the shape of the motor. Since z axis vibrator motors can also come in the cylindrical shape. So the shape of it doesn't necessarily mean its the old vibrator motors. However I'm not entirely sure what motor is used in the Z flip 4 so I can't dive in any further about that.
Thanks. I was able to fix my partner's z flip 4. Her phone was shutting down whenever the phone was flipped. I thought something was loose inside so I watched your video and tried to disconnect and reconnect everthing. After that, phone is working just fine. Thanks, bro!
You're welcome :)
Hello boss. Same problem din po saakin ginaya nyu lang po ba lahat?
I am experiencing this problem too
Would you help me to fix it.
Same problem here, but I have no tools on me currently to try and fix it. I'm in college and need my phone to contact my parents and do work.
Great effort, but would have been better if you kept on tearing down. I'm mostly interested in the new hinge design and updates to the display.
Thanks, yeah if it was an entirely new design I would have for sure taken it all the way apart, but since its so similar to the flip3 and the fact that other people will post videos on the hinge within a week or two after my video, I didn't want to render the device useless since there usually isn't that many views on my videos to recoup the cost of the device. :)
I've had my 4 since like January n been great .
@PBKreviews great video, none the less. But the Z Flip 2 & 3 screen can be plugged into Z Flip 4 temporarily just to access the info from Z Flip 4?
I'm not planning to fix the Z Flip 4, but there is some footage I really need from it 👀
Thanks in advance
Maybe down the road you could show how the hinge assy is installed since lately many users are reporting failures without any type of over use or abuse. with the hinge failure the phone is pretty much unfoldable. Great video should come in real handy for all the bad Flip 4 phones.
People think they are the hinges but in reality it's actually the magnets that hold the phone together.
Question.... would you know why my z flip 4 disconnects from battery when i close it? It's either getting a short somewhere or the hinge is pulling the battery cable somehow? It only works when it's open. The second i close the phone it turns off and i cannot turn it back on until i open it up again.
My zflip4 would just shutdown when closed, unless it's charging.
Gave it to a service center 2 days ago.
They said it'll be fixed for free cuz it's under warranty, was told it was something to do with the motherboard.
Got the phone back today, it had no more scratches on the body aswell as the screen protector, almost as if the entire phone was new😅.
Though I think it's something to do with the battery in the top half of the phone👍
Hope yours is fixed
This was very informative. I can see how both battery capacities add up to 3700 mah. I'm waiting for this phone to ship. Thanks for the info on its internals.
You're welcome, glad it was helpful :)
Good video. My other halfs phone has just packed up. It works fine when open but after its closed, it refuses to come back on. If you tap it, eventually, it comes back on. Sent off under warranty and they refused to repair it, saying it had been damaged. It literally hasn't got a scratch on it. Always kept in a case, never dropped. Samsung want £425 to repair. My response this product isn't fit for purpose.
Thank you for these step by step instructions. You should give lessons to everyone on how do create viewer-friendly DIY videos!
You're welcome and thanks 👍
I can assure you that it's the teeny weeny flimsy hinge samsung used on the flip 4. when mine dropped Approx 12-16 inches off the table the fall caused the hinge retainers on one side to shear.. No magnets at the hinge end. That's why I will never own another Samsung flip or fold.
Amazing video ! You are by far the Master of teardowns ! I have a couple of questions for you. How much heat was applied and for how long in order to remove the back covers and what do you recommend for the heating ? Hot air gun or rework station heat gun ? Also, can you point to where the test points are located for model F721W ? Thank you !
I prefer to use a hair dryer. Less of a chance of damaging any components. Just apply enough heat so its hot to the touch and use a suction cup tool to help gain leverage. You can always apply more heat if needed. I don't know where the test points are.
Super thanks bro! Very educational indeed
Glad you enjoyed it!
What do you reckon? does the overall engineering and build look durable for a 2 year span?
The frame and overall build I would say is good and would last 2 years for sure, but I am not a fan of these foldable screens. I've had them crack out of no where in the crease before and I just don't feel like I would use one as a daily phone without making sure I have some sort of insurance plan on it :)
@@PBKreviews yes indeed, that aluminum frame looks chunky and sturdy but the fragility of that foldable display cannot be ignored...I am one of those primitive fellas who only use one device at a time...and I am a sucker for compact devices, hence I was still using my appalling battery life plagued iphone 12 mini...I have pre-ordered the flip 4....this is gonna be my one and only primary device, so I did make sure to get samsung care+ ....thanks for the teardown...
Always love your disassemble videos sir. Any chance you would consider doing a video on removing or replacing the screen on any Samsung Foldable device?
On the Z Flip 3 video I did, I removed the foldable screen so you can watch that video and see it.
@@PBKreviews Just viewed it Thanks. I have had all the foldables at some point after they came out and i always wondered how the screen looks underneath!
Your Awesome!
أحسنت يا صديقي. مزيد من الإبداع
Used this video to repair my phone. I found one with a bad esn on ebay and used it to exchange the screen. I just took the motherboard from my phone and put it in the ebay phone. Worked flawlessly and was easier than trying to get the screen off the frame.
Hello, thank you for this amazing video. By the way, Im having a network/sim problem, I tried all the troubleshooting steps and nothing work, so I think the problem is the hardware? Do you know which part do I need to order? Is it the PCB?, Wave antenna? Qualcom x65 modem? Please help. Thanks
Your teardown is top and clean
Great video, now i know how it looks inside, by the way, can i hace model.or name of the glue remover? I like to remove the glue from macbook pro battery , thanks
Thanks. www.ifixit.com/products/ifixit-adhesive-remover?variant=39915173740647
Incredible video, thank you
You're welcome!
Thank you sir much appreciated for a professional level explanation 👍 ❤
👍 you're welcome
İ think channel should have more subscribers i love you broo
Thanks! 👍
what is the reason why when some of the flip phones are blinking when flex mode? is that related to screen or other hinger related problem?
Watching from my flip 4 and I love it. But in paranoid about the screen breaking like the flip 3 so many complaints and pictures and reviews of the crack on fold
Beautiful.. Love from 🇮🇳
Thanks! :)
I have a question... If the pcb board charger are faulty, do affect the signal network?
Hi I need to change the bottom battery but have 5 screws that won't come undone. How could I go about getting them out? Thanks
I went to know if the flip is not opening how would I do it
Which cable is for the screen? Or screens?
Thank you. love this video. :)
You're welcome :)
YOU ARE THE BEST...
Thanks! :)
@@PBKreviews please disassemble RED MAGIC 7S PRO if you can.
@@PBKreviews where can i buy an original lcd for my POCO X3 PRO if there is? I hope you can help me or give me some tips. Thank you.
I'm getting no signal on my flip 4. Do you know where the antenna is located and how to replace it? Or how to push it down to make better contact
There are multiple antenna, from ones in the frame, to motherboard and sun board contacts, to the plastic covers over the motherboard etc.
@@PBKreviews So out of all of these do you know which are the main ones responsible for 4g/5g data. I get "emergency calls only" or "No service" message.
Can i use Z Flip 4 Screens to be used to a Z flip 3 as replacement? THanks
nope it wont work
Brother need an advice ..can we replace flip 4 with flip 3 display..my flip 4 display is broken so can I replace it with flip 3 display …? Plz let me know
Thanks for this great video, can you tell us where to get parts for it?
Respect🙌🙌
👍
whats does the large organge flex is for?
Nice video!
Thanks!
Anyone know if the storage chip be easily upgraded with a SMD reworking station?
WoW
So Good Mr From Iraq.
Thanks!
This is one of the best videos. I was wondering, though, if anyone knows what that's little unused circuit connector on the right side? Im thonking its for repair or data retrieve but its a mystery
Not sure which connector you are referring to.
Please where I can buy the screen to make replacement by my self
Hi, thanks for perfect video, can I ask you about tips wish way possible to buy new screen Samsung Z4 flip - my it was broken after my new phone was fallen . Thank you man.
They sell the outer and inner screen assemblies on ebay but the inner is a bit pricey. If you broke your inner, I would suggest sending it to samsung for repair since their price would be cheaper. Here are some links for example: www.ebay.com/itm/334568591062?hash=item4de5d78ed6:g:ARsAAOSwRLVjLBj2&amdata=enc%3AAQAHAAAAoEgJMboZ%2B20Uf6QV0E2LNB5Qs21bpDpHcTZvz3HfNRXmQu4g79iy0yyM%2FkusIl1vK4lYiL%2FmP0gVa8ua0uDvnYWwMrCTj4pNp3jykHlekgmklPqv66UPNv8vAXQR2SyfST66Fg9tr1LmTyV9tPQcJh30LK2W1K89FbuZdwVKHIlkFBKfG6jUlQW3JkwDT8VKfEx7rHEs8TeT9kKbJGoVnOs%3D%7Ctkp%3ABk9SR6T1x8CHYQ or www.ebay.com/itm/334604966540?hash=item4de8029a8c:g:5mgAAOSwXOBjV8vv&amdata=enc%3AAQAHAAAAoIOmlJqFvhRcdr8tSXjIFpmmGHusSfSvVwHaMYdxUowGnBxo8Tl6TuSSBswTK2adxkTq%2BKk8B%2BBV%2BquuyPkpFlv8ut%2BG60aNBccv2VbCtksAybjlxacJqFJzgsHp1Fes8mzuEcVHVUbXOgJfUQ5pIL38zx8oGe708JfRl31V%2BuDYGh02FfL2kE7lx2YWDd%2FFg%2B4Z8em6kK%2FUpEDfCJaf%2BP8%3D%7Ctkp%3ABk9SR6b1x8CHYQ
great video
btw can you do the realme gt2 master explorer edition its a new phone with the all new LPDDR5x and a leather back
Thanks! You can see the teardown video of that phone at this following link: th-cam.com/video/g9fVEGdVT38/w-d-xo.html&ab_channel=%E5%BE%AE%E6%9C%BA%E5%88%86WekiHome . I don't think I will be doing this one, due to the cost vs views I get on these model videos.
Hello. Where can I order a backer? The glass has cracked
check mobilesentrix.com or rounded.com or ebay.
GREAT VIDEO!!
Thanks!!
Thanks for this...keep it up
Thank you, will do.
Much appreciated 😀
Can the flex between the upper and lower halves be replaced.
Yeah, you would need to cut out the cure in place gasket holding it in place with a razor but you would need to re apply a new seal with either cold glue or some sort of silicon filler to keep water and debris from getting inside the phone as well as potential for the flex moving around and getting damaged.
can i just remove the front glass to just replace the back hinge??
If you mean the folding screen, you can but since the cable is attached on the bottom to the sub board, it would be more difficult to work with when you cant completely remove that screen to have room to work, on top of the fact you might damage the cable by moving it around a lot.
Samsung best mobile in 2022 z flip 4 ❤❤❤❤
would love to buy the zflip 4 but man, that fragile screen is a worry..too bad theres no full body flips cases for it.
yup
have
Give him a like, he deserves a billion likes 👍
Thanks! :)
Test please IQOO Neo 6 missing part ☹️
Bekar phone h woh
Where to buy lcd screen replacement?
Here is a link, you can scroll to the ones on the bottom which say service pack: www.mobilesentrix.com/catalogsearch/result/?form_key=qnmj5knRUiVPgs7e&q=galaxy+z+flip+4 or you can search them on ebay etc.
How do i fix the hinge on it?
Thanks 👍 brother
No problem 👍
after any mobile cover removed look like human body organs 🤣
Hello! I'm getting the "Phone temperature is too low to charge" issue, so I was wondering where the temperature sensor is located so i could replace it. Could someone point it out for me?
If I'm not mistaken it requires the wireless charger to be replaced or disconnected. Aside from that, the charging port/sub board.
@PBKreviews Ah ok, thank you!
Nice video !! How easy it is to change the front camera? You don’t do it that’s why I ask . :)
Thanks! It's not too difficult, its just glued in with a cure in place gasket, so you would need to use an x-acto knife or razor blade to carefully cut the glue around the camera sides and gently pry out the camera.
flip3 is still good? I mean, performance for a wife not so much involved in games etc? resistance to open/close? screen in general? because this is too much $
Ok. Impresif !
:)
thankyou
Mine broke in 2.5 weeks. Posted a video. Defective.
oh that sucks
Great !
Good job
Thank you :)
Super thanks
The super thanks is a button you click that is like a donation.
👍
It's funny cuz it looks like the connection for the 5 mm wave antenna on the bottom is still on the motherboard
Yep, well last years both ran off a single cable and connector, but yep there a slot which doesn't have a connector soldered to it on the board. I remember reading somewhere about them moving to one antenna with newer chipsets and so forth, so not sure if they changed the design last minute to go with one instead of two. Another thing I would thing was 2 would generally provide uninterrupted signal where if one was blocked by your hand, the other would kick in, but I guess the antenna is positioned in a place where usually ones hand would not be blocking it often.
On my flip 4 the screen has broken all the way in the middle where is the hinge. Anyone has screen replacement? If yeh 2nd screen ia better? My phone is on screen replacement. Now am hesitating to keep the phone or sell it.
영상 감사!
You're welcome :)
Nice!
Thanks!
bro you better hire someone to prepare good thumbnails and new logo for your channel
I'm ok with the logo for now, maybe when my channel grows will consider making changes to it :)
1:10 did you say graphene?
Are you sure? I could'nt find any details about this.
Yes, graphene/graphite help to transfer heat.
literally only watched this video for screen repair, not a full teardown.
Good
👍
Wow!
👍
nice😎
Thanks ✌
Wow so amazing how no heat was needed 😂
of course it's needed. I Just don't show the heating because it will be a waste of time on video and people skip through it.
Wow....
Wait, this one has two batteries or what?
yeah
I'm the gadgets lover but, i'm not fan of those foldable phone actually.
yep, neither am I. :)
honor magic 4 pro disassembly
Not sure if I will be doing that one, but I will look into it.
Finally the've updated the camera sensors
:)
Bad one after one year.. The battery damaged and disconnected
Hey bro, the service center contacted us, they say upon replacement of screen, battery will be replaced as well charging us 63USD for the battery. Do you know the reason for this? Thanks
Sometimes the service centers depending on models of phones have replacement parts which come pre assembled and semi complete, meaning samsung has the parts ready to go so all they have to do is move over the motherboards and re assemble so it saves time and work.
Just the video I was waiting for, hate that phone teardown monopoly jerryrig zack fraud and his stupid "LiKe a LiTTLe LeGoOoOOooo"
:) Glad you enjoyed it.
disassemble a Galaxy buds 2 pro
i will look into it
thats some bad bad cooling, no VC for this phone like it was rumored..
The 3d graphite works just as well as a vapor chamber and as of the S20/Note 20, Samsung has been generally using the 3D graphite in place of the vapor chambers on their flagship/top tier devices.
@@PBKreviews S22 ultra has nano-TIM and vapor chamber..
@@PBKreviews "3d" graphite is just a graphite sheet(the one they use seems low quality tbh, plastic) hq graphite sheets are generally black.., they literally couldnt have cared less about the cooling, damn i have 5 sheets of 500x500 graphite sheets, thats how much i am fixated on cooling, dont get me wrong, it really does matter i think you also know that.
@@PBKreviews theres literally nothing, not even graphite behind the screen..also TIM application on the SoC is quite shitty, what is that, a dot in the middle? LOL
they didnt even try..
Can you add a SD card slot?
nope
Impressively tiny Mainboard
coin vibrator in a $1000 phone :(
Don't always be fooled by the shape of the motor. Since z axis vibrator motors can also come in the cylindrical shape. So the shape of it doesn't necessarily mean its the old vibrator motors. However I'm not entirely sure what motor is used in the Z flip 4 so I can't dive in any further about that.
Haw mach
This is model no good 😁
А можно по руский
first?
👍 :)
These phones are the biggest pieces of shit Samsung has put out,a complete rip off
My flip 4 has a black line in middle and also the lower half of phone flashes every time i opens it .... can it be right without chanting folder ??