We understand how to operate the box. How about showing us where the pressure sensor hooks up and the solenoids and the wiring for it so that we understand where that stuff goes. We understand the red and black is the hot and ground but as far as hooking up the rest of it, how about a diagram showing how to do it? And if we're not running CO2 or air pump, can we run this off of the turbos housings?
The blue lcds are different screens I use now because I like them better. Scramble is activated by a separate button. I have line and fitting kits but I dont sell the bottles and regulators.
First off loving the new billet look. Two quick questions. I noticed in some of the older videos the screen is gray and some of the newer videos it`s aqua blue just curious if thats a day/night feature? Other question is on the scramble setup is this being activated by a external button source or actually on the controller itself?
Randy I'm confused, which isn't hard to do. After one second you were at 15psi, and then with a ramp rate of 3psi per second,to a target of 30 wouldn't it take 5 secs to get to 30psi? The logger shows 4.4 and its at 30psi I'm only assuming the rate is psi per second, but I'm thinking I must be missing something Thanks
Friggin bad ass... I will definitely be giving this a try... save some money over the AMS. The fact you also implemented the scramble feature sold me... Now can you provide all the co2 hardware? Like the bottle and reg, ect ect? Just wondering...
![💬 How CO2 Boost Control Works [Technically Speaking]](/img/n.gif)
We understand how to operate the box. How about showing us where the pressure sensor hooks up and the solenoids and the wiring for it so that we understand where that stuff goes. We understand the red and black is the hot and ground but as far as hooking up the rest of it, how about a diagram showing how to do it? And if we're not running CO2 or air pump, can we run this off of the turbos housings?
on the scramble button..to activate it does it need constant 12v button pushed down or just one hit of the button (quick one time 12v signal)
Do you have a video that talks about the wiring especially the blue wire?
In the booklet it mentions a orange wire I don’t know if that’s a misprint
just purchased one today. can't wait for it get get here Wednesday.
Just got mine in the mail today. Very nice!
do you have to use c02?
so your scramble is stuck at 5
The blue lcds are different screens I use now because I like them better. Scramble is activated by a separate button.
I have line and fitting kits but I dont sell the bottles and regulators.
First off loving the new billet look. Two quick questions. I noticed in some of the older videos the screen is gray and some of the newer videos it`s aqua blue just curious if thats a day/night feature?
Other question is on the scramble setup is this being activated by a external button source or actually on the controller itself?
Randy
I'm confused, which isn't hard to do.
After one second you were at 15psi, and then with a ramp rate of 3psi per second,to a target of 30 wouldn't it take 5 secs to get to 30psi? The logger shows 4.4 and its at 30psi
I'm only assuming the rate is psi per second, but I'm thinking I must be missing something
Thanks
when you pronounce boost "bewsht" :D
just ordered mine last week
Friggin bad ass... I will definitely be giving this a try... save some money over the AMS. The fact you also implemented the scramble feature sold me...
Now can you provide all the co2 hardware? Like the bottle and reg, ect ect? Just wondering...
Your videos are not very informative as far as installation