INFINITI NISSAN CRUISE CONTROL WILL NOT SET ENGAGE. EASY FAST FIX!!!
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- This video will show you hot to fix adjust INFINITI NISSAN CRUISE CONTROL THAT WILL NOT SET.
www.amazon.com...
Disclaimer:
Warnings And Caution!!!!
If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein.
Disclaimer:
Warnings And Caution!!!!
If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein.
now I finally know why my cruise has hasn't Engaged for the last three years. thank you sir for a great video precise and straight to the point good job.
OMG I just fixed my cruise....it hasn't been 3 years, but i have been stopped 3 times because i have a lead foot! THANK YOU SO MUCH FOR POSTING THIS!!!
Thank you so much!
I have been struggling with this issue for long enough. Right after viewing your video I recalled replacing the brake light switch, which probably accidentally affected the cruise control switch. So I went for a ride, pulled the brakes pedal, and voila - cruise engaged!
Once again, I am grateful for your video; may you and yours be ever blessed with all the best.
Thanks for the video. Mine had a button on the brake pedal arm that had fallen out causing the the switch to remain open. The video helped me identify the problem.
Me too!!! 2001 Nissan Pathfinder. It almost looks like a nickel (hard to see at that angle) was glued to the metal, top of pedal, under the brake light switch. Under the cc switch is just a hole and a gap between switch, no contact. Is this metal "button" an oem part and available? I'm thinking of gluing a nickel or stack of flat washers to match height of "button" and adjusting cc switch as needed. Thanks in advance.
Due to brake stopper (Small Plastic cone shape ) was broken, that came to know after watching this video, at shop put new 2 nos and now working perfectly. THANKS for your effort 👌.
First, THANK YOU! This is unfreaking believable! I have been assuming all along that my Q50 was needing sonar sensors (installed them by cutting holes in bumper-long story), then I needed an ICC unit but found out I didn't need that but a new front grill camera (didn't have one at all)? Nope! I have spent countless hours researching why I don't have cruise...now I know it's this switch after pulling the break pedal up with my foot while driving and setting the cruise. Now I just need a new switch or possibly adjusting the old one. Wow, thanks again!
Thank You George you are my hero. The cruise would not set yesterday but only the word "SET" would flash.
Today I lifted the brake pedal and it now works. I did not adjust the switch however I think the problem was a floor mat corner on the brake pedal.
You are "Da Man".
Genius. What a tip! That took me 5 minutes to fix my cruise control. Thanks
I have a Nissan Xterra 2001 and I have the exact same problem, I'm check it out tomorrow and hopefully it would be the same issue.
Thank you so much for this fix and not letting us fall scam to some auto shops
Many thanks. Thought I might have an expensive repair to fix this.
But my MK1 Nissan Qashqai had this same fault. Although the procedure was different it still fixed it.
On mine, I had to remove the trim underneath the steering wheel, which gave me direct access to the switch (there's only one on my model of qashqai) I gave it a quick turn anti clockwise and it came straight out (there is no nut to loosen). Pushed it all the way back in a gave it a quick turn clockwise to lick it in place. And after about 10 mins work, I now have working cruise control.
So
Many thanks
Thanks driving now pulled up on brake pedal on 08 g35 worked thanks everyone please like this guy's video
I saw this video around the time you made it and came back to it years later I finally fixed mine today thanks!
hi thank you for the help. i just bought a buick lucerne 2006 with 60000 miles, the cruise control would not work. the light on it would come on and go off but it would not engage. thanks to you it now works. i pull up on the brake as you said and it came right on. a older lady owned it and may not have used the cruise i don't know but it works now. great. thanks dennis
Thanks! Awesome video. This is exactly what my 2012 manual Nissan Pathfinder was doing. I found the switch that you describe in the video, located on my clutch pedal. I removed the wires from the switch (very easy) & adjusted the switch in a counter clockwise direction until the clutch lever fully pushed the plunger of the switch in. Hey presto, cruise now works! Thanks from Australia.
Cruise control on a manual? Didn't know that was a thing. I should get out more. Thx!
I just picked up a used 2007 G35X where the cruise was not working. Watched your vid, made the adjustment, works! Thank you my man!
It's always something simple; you just have to know what the simple thing is.
Likely has a nut on top. I don't completely know gut I think you would turn it up up the shaft one or two turns after u loosen the lower nut. This drops the contactor lower to the pedal and then secure the lower jamb nut. Reason I mentioned it is so not to put twisting pressure on the wires if there doesn't seem to be enough slack in them. My luck would be I twisting the switch and do wire/connection damage.
Super good video. You helped alot of people
Hey man thank you sooooo much for this great information. I have 2012 Altima and I had the same issues and after watching this video and trying it on my own car it finally worked. I was ready to give it to mechanic to get it fix and I know they would of charged me shit ton of money. So thank you again
Your video was the missing link I needed! Most videos were focused on the cruise control only, but I found that my break piece had also fallen thanks to the great camera shots/you bringing it up. When the pieces originally broke, I kept them in the hopes that a mechanic would know exactly what was wrong. Yet, after using your video combined with the “one cent trick”, I tried it myself instead :) We’ll see if it actually worked in the morning…my neck started hurting from all the contorting, haha.
Man, this video is 6 years old and still very helpful. Sorted mine with the help of your video. Thanks very much!
Great info! Just bought a G35 with this issue and your video helped me fix it quick and painlessly.
There is also a small rubber grommet that controls the cc if it breaks like mine did all you need to do is take 2 dimes and place them where the rubber grommet would be this is a much more simple fix and is more likely the cause of the problem
LiL' Skurtt does it need to be completely pushed in or no
I will try tomorrow morning..as It seems that this could be the problem .. finally I will get something to try!! thanks for the video, great job
Спасибо. Я понял почему мой cruise перестал работать. У меня вышел из строя датчик на Nissan Altima L32. Я посмотрел ваше видео и мне очень помогло это. Привет из Казахстана 😊
Yes, it did work for my 2008 Altima CC is now working. Thanks.
dmmmmmn it really works in my car now after owning it for 3years😍😍😍😍😍👍👍👍👍
OMG, thank you. Had a big brake job done and cruise control didn't work when I got it out of the garage.
I would also make sure the brake lights are working correctly when you're done & adjust the brake light switch if
necessary.
+Richard Righi very good point
Richard Righi which one is the brake light switch?
@@hamdanahmed2664 it's the one to the left, with the red/brown part. You don't need a wrench, just loosen by hand it 1/4 turn and lower it down until it clicks, then tighten it back 1/4 turn. Easy adjustment.
DUDe thank you so much. 01 Maxima here and the CC never worked thanks to your video I was able to figure out what was wrong. My center console is broken but I have no idea what it did before it separated. if you know please give me a shout. thanks so much again
Just did mind 10 mins ago Definitely works
Thank you
Just want to say thank you 2011 Nissan Altima coupe appreciate that it works
Thank you very much for this video. You're a master! Thanks again.
Tnx a lot, save my money and my time, for 3 days no one couldn't find solution... nissan Qashqaei.
Hey George, Your video is clear except where is the part where you used your crescent wrench? Does the nut need to be tightened?
bro. this has been a 2-3 year issue with my car. i'm actually mad this was as simple as it was. 1 'mechanic' wanted to drop the trans and take a look inside, the other just kinda shrugged and told me 'that happens with those, even the manufacturer can't figure it out' lol.
seriously.
No way!! As I'm driving I tried it and it worked
Thanks a lot, mine is fixed now
Great video. But I just went and replaced the switch with a new one. And for some reason it just jammed my brakes the moment I hit 120 cruise control. I had to disconnect it from the pedal to be able to drive again.
10 amp break fuse on driver door fuse box was my issue. Had to push start twice and cruise would only blink.
Thank you! Worked like a charm!!
Do you have any experience with the cruise light coming on with the set light blinking?
Bizzenn1976 This just happened in my g35. Now the cruise light won’t come on
having this problem now
Same problem and not engage
For anyone with the older models G35s like 2003, you will have a different model. Do not use tools for this! You WILL break the clips! Instead, look for the long black shaft that looks like it has threads. From the plug end, turn it counterclockwise and it will click (unlock) and then pull it out and rotate it 1/4 to 1/2 turn clockwise. Push it in and turn it clockwise into it clicks (locks). Be careful, well somewhat careful, because that shaft uses a 4 square female to male locking method. If you notice the threads, they have slots running the length of the shaft so it appears thread, slot, thread, spot, etc. If it makes it easier, you can press the plug lock in and pull the plug out of the connector to give you a little more room. Pull the plug out first if you have little room and then grab the part that is connected to the black shaft to make life a little easier. No tools required!
Thanks for the video, you solve my problem for free🙏 vehicle: pathfinder r50
Did you have to remove anything to reach the fuse? Seems like i cant reach mine on R50.
Here's small trick to add to this only mess with the black one and if anything just take out the whole thing and press it back in all the way and lock it. It worked for me and so far no issues.
Yaseen Yusoof should try this one
Yaseen Yusoof with what did u lock it?
good tip
thank you for this useful informational video
will be trying next time i go out. this sounds exactly like its my problem. funny, ive worked on cars for friggen ever.... but never cruise control??? just realized it.strange.
Ive just found this as bought an x trail a year back and same issue. However mine is manual and i think this switch is over my clutch but i cant adjust it however if i push the clutch up a little with top of my foot i can engage cruise control.
Nice video. Easy-to-follow instructions.
Great information. Today I turned the CC on and the dash light came on. Trying to engage caused a flashing SET but no engagement ?
Hey George, I have a 2013 FX37 that the cruise control will drop out when the lights are turned on, every time. Changed the TPC, brake sensor, calibrated and it still does it! Mechs are clueless about and I’m not paying anymore. Ideas?
you are the bomb!! thanks for doing this video.
Interesting I'm going to try this I recently bought a 2018 altima and it's cruise control has the same problem
I have the problem of when I push the cruise control the set botton blinks fast but won't set. This happened recently. I checked the break and the button is being pushed down. Any other ideas?
did u ever figure out your problem with that. i have the same issue
Eric Montoya i have a qx56 2004 the problem is when push the suish for on the cruise control a orange light come what you think need fix please let me know thank you..
Eric Montoya I have the same issue on my 2007 qx56 any ideas??
thank u so much its work with me شكراا جزيلا ضبت معي
Thank you very much man definitely helpful you're awesome peace
Great Cruise Control Fix
I just got a infiniti ex35 and cruise control ain't working Imma try this thanks
There's also a switch on the clutch pedal that will do the same thing for manual cars.
i have the same problem for my nissan tiida 2011 and i check this pedel switch its ok, so anybody have any advise to change or repair other parts of cruise control system, i tired to find out the issue in last few year's
Tried but didn't work, any idea of what else could it be? Thank you for your video.
Ok I found what my problem was, there's like a plastic pin that press the button of the switch, this can be broken or missing so you will have a hole and the switch would not be pressed. I found my little plastic or rubber pad on the floor so I just put it back and my cruise control worked, I found you can buy it as "break pedal switch pad". Thanks to your video I started my investigation and then found the solution ❤
Hi, I have Infiniti FX37. My cruise control working only between 40 and 60 km/h. When speed is bigger than cruise control not working, only is blinking...
It could also be where the clutch sensors hit... I have a 2005 350z and where the clutch rests there was a hole where a rivet usually goes that fell out... replaced the rivet thus filling the hole so the sensor could hit and works fine.
Thank you very much sir
Thank you very much 🌹
My 2002 Nissan xterra 3.3 6 cyl. Automatic cruise control works fine on fairly level roads at 70-75 mph but jumps out of gear (automatic transmission) on long steep grades leaving engine racing til I shut off cruise. Sometimes happens with normal accelerator under same load conditions? Any ideas
Okay .. 2000 pontiac grand am. Cruise light comes on at the steering wheel but has you said it won't engage. Used to be it would only engage for short while/ short distance then go off each time. Cruise word in gauge cluster does not come on even doing the edt foot brake pedal lift. My set screws are not brown and multi coloured but both are cream in colour. So I went with the right side one closest to the center console. It had its button all the way push in I backed it off so it just barely goes in once you let off the brake pedal. Not test drive it yet to see if that helped. Does not seem to be the large cruise module under hood nor its cable nor the three fuses on passenger side dash.
THANK YOU SO MUCH
Thank you so much it works now
Thanks! Saving the day :)
Great work man...
I had a problem with both the brake lights(staying on after switching off) and an issue with set cruise control .
Thanks to your vid I was able to fix the brake light issue to keep the switch closed and engaged by using a dime and some sticky tape. The little rubber pieces that kept the switches down disintegrate and fell off.
Cruise control still won’t set , even though I used the same method of sticky tape + dime to keep the blue switch pressed down.
Any idea what else i could be doing wrong ? Thanks a ton
Thank you ask much, dude you are awesome!
Did you have to tighten it with the wrench? or does it work with just turning the black plug?
Thank you
Also where should the narrow button be on the other switch all the way in or out. Both mine were all the way it it looks like. As said I brought the right side one I believe the cruise engage switch out so after you press down on brake pedal and let go that when pedal comes back up it just barely pushes in the narrow button. Which I could attach photos to show you. Do you have an email to send you photos.
Watched one of your video's (INFINITI NISSAN CRUISE CONTROL WILL NOT SET ENGAGE. EASY FAST FIX!!!). It does not apply to my 2016 Nissan Murano Platinum. My switches do not have nuts to lock the switch. The bracket the switches are connected to seem to be pressed through the metal. [Every picture I tried to take comes out blurred.] Both the brake and cruise switches are plastic, they have threads that may be in the bracket, but the switch doesn't turn. Your video comes up short of using the wrench to unlock/lock a nut. The play of the switch is only two or three millimeters. Using my foot to pull up on the brake worked once, but only on one leg of my trip.
This is a great video, do you know if they still used a similar setup on a 2012 Versa? I'm looking at my friend's car today and that will be a great simple place to start. Thank you! :-D
Hope this works for my brand new juke..not even 300miles done yet..
By mine knowledge switch for the cruise is the brown one not the black, black is for the break light.
What does the cruise control do?
Does it let drive automatically on the highway or...?
I have this problem with a 2007 nissan Qashqa acenta (uk).... would this be the same fix
i have a infiniti qx56 2004When I press the power button of the cruise control the light orange come so tam well you know you can be to repair it
I have 2012 altima and the after hitting cruise control the my car won't change gear.... it stuck in 2nd gear...... it won't move..... can you tell what to do....? cause I took back to the dealer and he told me he fix it.... but it still doing the same after getting back the car.... .. I don't know what to do now...
Great! Thank you
Will this work for a Infiniti QX60 2015
Hola buenas tardes,
Yo tengo un problema con mi módulo de control de velocidad.
El switch del pedal y el switch en el volante funcionan bien.
El fusible está bien.
En el tablero el indicar de encendido (ON) funciona.
El problema es que el módulo de control de velocidad no logra mantener la velocidad, sino que se va desacelerando hasta llegar a los 48 km/h y se autodesactiva.
Como dato adicional, el módulo de control de velocidad fue sustituido por uno de medio uso pues el original se averió por corto circuito.
I had a problem where my brake light was always on, because my 2003 G35 is already 15 years old I guess, so the plastic part broke on the upper part of the brake pedal, but I fixed it to where the brake lights work fine now, but I guess because the brakes were messed up due to the brake switch, now the cruise control doesn't work.
You could show how to test the switch so people dont just go out and buy them without knowing.
THANK YOUUUUU
Thanks man, that was greatly appreciated.
Hello thanks for sharing. My Infiniti Q50 cruise control disengages automatically. Any fix ? Also the rpm keeps fluctuating slightly up and down
Rpms fluctuating is a misfire
My 1996 infiniti i30 is cut off while giving gas, what could be the reason?
thank you alot
I have the same problem butthis solution didnot help is there any other possible solutions
? thanks
How’d you take the bolt off for it to be able to twist
Hey man I have 2003 infinity g35 sedan and my cruse control is not working . When I click the button on the steering wheel to turn it on the light that says cruse control comes on but when I let go of the gas it slows down. I tried to fix it and adjusted like you did but it’s still not working. Can you help me ?
this guy is not a " Real" mechanic look at his tools 🤣 go to your local autoparts store and make a couple of buddies there. its your best bet.
Wonder how much would the dealer charge you for something that simple
What did he need the wrench for?
Why did my break lights stay on when am getting it that fixed
My switch is being pressed and still wont work any ideas?