ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- My Cruise Control started malfunctioning with this random blinking action on my 2012 Infiniti G37 and wouldn't activate until I restarted my car, but then it would soon do it again. I found out the cause and hope this easy fix helps you.
Subscribe for more awesome videos! bit.ly/Gq37Sub
Get your Infiniti shirt here: bit.ly/Infinit...
Like Hoodies? Get your Infiniti Hoodie here: bit.ly/Infinit...
Vehicle: 2012 G37s 6 speed
Instagram: @GQ37Official
Music: "Surface" by Loxbeats (No Copyright Music for Vlogs)
**This video contains affiliate links, which means I receive a small commission on a purchase without any additional cost to you, if you buy something through my links. As an Amazon Associate, I earn from qualifying purchases. If you do purchase from my links I greatly appreciate it and know that it helps keep this channel going!
3yrs later you are still saving people haha, happened to me today thanks. my break switch nut snapped off a few months back and i just DIY fixed it for the mean time, but im gonna add a stronger and sturdier bolt.
Hey glad this helped! I recently did a similar video for my Nissan 350z after experiencing a non working cruise on that
Thanks! That’s exactly what my Titan is doing.
We were on a road trip and had the cruise control blinking. Thanks to your video we were able to get it working and had a much more pleasant trip. Great video
Thanks, So glad to hear that this was helpful!
I’ve found if your brake fluid is low, it will cause that to happen, especially if it’s just at the line and I accelerate (causing the fluid to tilt backward) will set it off. I just top off my brake fluid and it goes away
I knew about these buttons and I actually have some spare new ones for each clutch and brake as well as the rubber button that goes on each pedal. Didn't know it wad causing stupid light to flash. With a tuned car and extra maps it's important to be able to use the cruise control always. Tha ks a million like the shirt!
I was getting this issue about 2-6 times per week randomly since I bought my g37 and I haven’t had the blinking cruise light for about 2 weeks now since I sprayed all the buttons on my clutch and brake. Topped up my brake fluid as suggested by one of the other comments too, no issues since.
Whoa cool. I never thought of this. Gonna see if that's the problem on my versa. I thought it was a speed sensor. The brake switch makes more sense now as it always happens when I just start out. Now I get up to speed, go in neutral, turn the engine off and back on while rolling, and all is fine, until likely, when I use the brake a few times! We'll find out!
Thanks mate, I had a problem with my nissan Dualis cruise control, when I turned it on the cruise light was on but the "Set" light would only flash and not allow it to engage. I cleaned the brake light switch and the clutch switch with WD40 which did not seem to make a difference, however I decided to see if there were any error codes that needed clearing and sure enough there was one, which after clearing it became operable again.
Thank you so much 🙏 You are good man 👍
Thanks so much for the video. Issue resolved.
Awesome glad to hear it!
Yes! This worked for me! Thanks!!!
Awesome glad to hear it!!
Good info thanks for sharing!
It works on my 06 quest v42 thanks alot
If this doesn’t work its worth changing over your spring squib/Clock Spring (nothing to do with the time) as the cables tends to snap from there. You will need to remove the entire steering wheel to get to it
yep, especially if it works when you turn the steering wheel, but wont' work when the wheel is straight.... this was the case on my fx35
I had a problem with my nissan Dualis cruise control, when I turned it on the cruise light was on but the "Set" light would only flash and not allow it to engage. I cleaned the brake light switch and the clutch switch with WD40 which did not seem to make a difference, however I decided to see if there were any error codes that needed clearing and sure enough there was one, which after clearing it became operable again.
Damn bro this might work for g35 too should change the title
Will this also work on a 2003 Nissan Altima S?
Possibly, but this other video I did on my 350z might be closer to your altima switches, hopefully one of them helps. th-cam.com/video/NPSNYonzO0E/w-d-xo.htmlsi=R9qtNTLWI1I456iS
@@GQ37official Thanks.
About 2015 Q50 cruise control is blanking so I guess what I will try that thank you.
It did work
I eventually found out what my issue was with my cruise control and it turned out to be nothing to do with the cruise system, it was in fact a faulty turbo charger temp sensor! I had read on another forum that this can happen when the sensor fails or starts to fail, error code on the OBD scanner was P0096. the new sensor cost $60 and literally an easy 2 min fix, being as it is located on top of the negine near the rocker cover, happy days again.
Thanks for sharing that, hopefully that will be helpful for someone searching here in the comments, was that a Q60 or what vehicle?
@@GQ37official a 2013 Nissan dualis diesel, 1.6 tdi.
I wish I was at 94k miles lol I’m 144 just bought my car yesterday loving it
Worked for my 2009 370z with manual transmission there were 3 push switches two on brake pedal and one on clutch sprayed them all and clicked them a few times by hand problem has not appeared since thanks
Awesome, glad that helped!
I have a convertible, the cruise control is flashing and one day the top will not open, did that have something to do with?
Hard to say, I'm not familiar with the convertible mechanisms, but wouldn't think the convertible control unit would be connected with the cruise. If the method on the video doesn't fix the cruise then it's probably electrical.
I've noticed that when my cruise control does that, I also can't use the steering wheel buttons to control the radio/cd player.
That's how my FX35 was, classic signs of a bad clockspring.
@@GQ37official Had it looked at today. They said it was a bad combination switch on my vehicle, not a bad clockspring. Almost $600 to fix.
@@CynsCorner ouch. That sounds really high, they much be charging about $350 for the install. It could be swirches, they both plug into the wheel, switches and clock spring, it's just way more common for the clock spring to fail. The switches are easier to get to than the clock spring since they're in the steering wheel which you have to take off either way, clock spring sits back a little further. My Infiniti dealer charged $250 to install a clock spring on my fx35 about 2 years ago (including the part) so that's why it sounds high. Unless you're doing it yourself I'd get s 2nd quote on install. Good luck and hope that fixes it!
@@GQ37official - Yeah, I'm definitely going to be getting another opinion. Research indicates the average cost should be about $175 less than what they're charging. But when I looked up the part itself, one site said it was $500+ for the part alone. Blargh ...
WD40 works! I am pretty sure now it's the spring problem.
Glad this was helpful for you!
I tried the wd40 today let’s see if it goes away. Thank you
If not it may be an adjustment or the rubber stoppers for the switch on the pedal did a separate video on it for my z that might help th-cam.com/video/NPSNYonzO0E/w-d-xo.htmlsi=SSUO18TmK-vyLzvW
My tail lights are blinking when the car is locked. Plus sometimes the tail lights stay on
2015 Infiniti Q60 Convertible here, I cleaned both the rubber bumpers and spring and it is still doing this. I noticed every time i hit gas hard it causes it to go off every time any ideas? All fluids just got replaced a few days ago this was happening weeks before going to the dealership where they could not find a code for it.
usually has to do with the switch not getting pressed adequately. The bumpers can become week and not put the right amount of pressure on the switch to fully press / depress it. In my case my button itself was becoming jammed and a little wd40 on the button fixed it. Some people have just replaced the rubber bumpers or adjusted the bolt for it to move closer or further away as mentioned in the video so that it's getting the adequate amount of pressure. You can also put something on top of the rubber bumper to make it closer to the switch, several layers of thick tape or a zip tie, something that will stay on while you try it and see if it works. Most dealerships don't even know what to do with this as it won't show up on a scanner. Hope that helps as I know this is an annoying issue.
Hi thanks for upload
Any suggestion , My cruise control of nissan altima 2012 fix on 93km/hr , below speed keeps working, if i accelerate above 93km/hr its getting disconnected, then i have to switch off the car for ten seconds to start again , I've tried all but doesn't work for me .
Plz ur help
If it works below 93km/hr but not above that sounds like a sensor issue. May have to take it to the dealership or mechanic of your choice to have it diagnosed.
@@GQ37official I've changed both speed sensors but still the same
@@beautifulmind3847 change gear box
@@jinkazama3699 thanks i will try to check it
@@jinkazama3699 lmaooo
my cruise control doesn’t work at all anymore after I changed my battery. and airbag light came on
I used to get the flashing cruise set and now none of the buttons work. I replaced the clockspring and steering wheel and still nothing. The other buttons work but the right side buttons don’t do anything at all
weird, definitely sounds like the clock spring, that should have fixed it. 🤷♂
@@GQ37official I already replaced it with an aftermarket one, nothing
@@drake4121 the code may be different if after market, the new clock spring may need coding to the original setting.
@@bernardmiler3106 it turned out to be the Uprev tune. I switched to Ecutek and my cruise control Is back to normal.
I just had this happen to me, but my car will shut off. Is that the same issue?
No, not sure what would cause your car to turn off. That sounds much more serious than just a cruise control issue. 🤷♂️
Definitely sounds electrical vs just the cancel switch. Might be ecu related? Definitely report back here if you find out what it is in case anyone else has that issue.
Interesting I’ve replaced both switches and still will randomly get it...
did you fix it
I think I just pissed mine off more by doing this... no fix for me.
Sorry to hear that. does yours work at all? If your cruise activates when you're turning your steering wheel it could be a clock spring. For me, it was just random, it would start blinking when I didn't even have the cruise turned on 🤷♂️
I had a problem with my nissan Dualis cruise control, when I turned it on the cruise light was on but the "Set" light would only flash and not allow it to engage. I cleaned the brake light switch and the clutch switch with WD40 which did not seem to make a difference, however I decided to see if there were any error codes that needed clearing and sure enough there was one, which after clearing it became operable again.
No to wd40. Yes to wd40 contact cleaner
My problem is that when the headlights come on, the cruise goes out, after a restart with the lights on it flashes and won’t set. Freakin Weird!
That is weird. Maybe clock spring but I haven't heard it that issue before, definitely wound electrical
@@GQ37official I remember having a taillight replaced, maybe a short or something triggering a signal resembling a brake signal( honest spitball here?.)
Problem went away, not sure what fixed it, ain’t kissin that Gift horse, I’m just Scootin’ On!
Nope is not working for me, thanks anyway..
could be your clock spring, does the cruise / volume controls work when you turn your steering wheel? Sometimes there's a short and it only works when turned. This was the case on my FX35