Kudos for your video. Your input was the key element in my successful endeavor to add cruise control to my 2010 Toyota Corolla base model. Oh, the thrill of victory! Thanks, again.
Hi @bullelephant1, I just installed cruise control in my 2010 Toyota Corolla CE. The button works and the cruise indicator shows on the dashboard, but when I tried it on the highway at 100 km/h, the car slows down when I remove my foot from the accelerator, even though the dashboard still shows "cruise." How can I fix this issue? Am i missing something?
I have a 2013 Tacoma base cab, 2wd, 4 cylinder, manual transmission, and they removed most of the prewiring in this model (2012 to 2015). I had to get the cruise switch with the horn ground harness, which works out the same as your 3 pin connection. I also had to get a clutch switch and found the factory harness did have a connector for that, but no cruise light and I need to run a couple of wires (ground & ECM) and hope it will work then. The connector you were trying to get the female terminal pin out of has a little lock on the side opposite of the connector release, you have to pry it up just a tad and then you insert a push pin in the large hole to pull the wire terminal out. Glad your worked out easy and the earlier automatic transmission Tacoma's did too.
I have an 09 corolla ce automatic. Did everything with a new stalk, plugged in and even put pigtail pin in upper left. Horn works but cruise doesnt. Smh
I bought the cruise control stalk and just installed into my 2018 Hiace van. Its not working at all, seems the van dont have prewired the cruise control system.
Thanks for the video. Is there anyway you could know for certain if a car already has cruise control installed if the switch is missing? I have a Camry 2005 Manual GLi. It has the 'CRUISE' logo on the instrument panel and also the hole where the cruise switch is supposed to be installed, but I'm not sure if that's the only thing missing. I've scoured the entire internet with no real luck.
I would think so. Most all cars already have it, but are just missing the switch. Do a Google search and see if you can find anything. Good luck with your project!
Kudos for your video. Your input was the key element in my successful endeavor to add cruise control to my 2010 Toyota Corolla base model. Oh, the thrill of victory! Thanks, again.
Hi @bullelephant1, I just installed cruise control in my 2010 Toyota Corolla CE. The button works and the cruise indicator shows on the dashboard, but when I tried it on the highway at 100 km/h, the car slows down when I remove my foot from the accelerator, even though the dashboard still shows "cruise." How can I fix this issue? Am i missing something?
I have a 2013 Tacoma base cab, 2wd, 4 cylinder, manual transmission, and they removed most of the prewiring in this model (2012 to 2015). I had to get the cruise switch with the horn ground harness, which works out the same as your 3 pin connection. I also had to get a clutch switch and found the factory harness did have a connector for that, but no cruise light and I need to run a couple of wires (ground & ECM) and hope it will work then. The connector you were trying to get the female terminal pin out of has a little lock on the side opposite of the connector release, you have to pry it up just a tad and then you insert a push pin in the large hole to pull the wire terminal out. Glad your worked out easy and the earlier automatic transmission Tacoma's did too.
Hi I have a Toyota auris (Corolla in USA) it’s 2013, how do I know if it’s pre wired for cruise control? Thanks
Absolute fab was giving up from 🏴
Sir one request from India could you please make an video for how you opened up the steering airbag safely? Thanks for sharing this video.
What is the name of those keys you said to use to remove the wire in the white plugs?
Search for terminal removal tool kit.
@@aadiversified5541 Thanks for the video and the response!
Hello, do you know if the Toyota avensis 2.0 vvt-i 2005 is compatible? (5 speed manual)
I have an 09 corolla ce automatic. Did everything with a new stalk, plugged in and even put pigtail pin in upper left. Horn works but cruise doesnt. Smh
Nice video i have nsp 120 manual chasis pls help
I bought the cruise control stalk and just installed into my 2018 Hiace van. Its not working at all, seems the van dont have prewired the cruise control system.
Did u work it out or gave up ??
do some research and you probably need to run one wire to the ecu. its no rocket science
What year corolla? How do people leave that bit out
Mine is a 2009.
which model chases i have 1nrfe nsp120 does this same ?
Thank you!
I was try on Land Cruiser prado 2015 model Type TX but it’s not working
Can you help me sir
I'm not sure if those are set up like the Camrys and the Corollas. Wish I could be of more help.
Thanks for the video. Is there anyway you could know for certain if a car already has cruise control installed if the switch is missing?
I have a Camry 2005 Manual GLi. It has the 'CRUISE' logo on the instrument panel and also the hole where the cruise switch is supposed to be installed, but I'm not sure if that's the only thing missing. I've scoured the entire internet with no real luck.
Awesome
is toyota corolla 141 2008 comes with cruise control?
I would think so. Most all cars already have it, but are just missing the switch. Do a Google search and see if you can find anything. Good luck with your project!