FOR THE LOVE OF GOD! please everyone reading this comment remember to replace the O ring that sits on the EGR cooler under the manifold. I did this job with my ol' man and after a long time putting it all back together the engine coolant was pissing out the bottom so we had to start all over again from the beginning 😭😭😭 learn from our mistake and purchase that seal!!!
I think its better to own and maintain 220 cdi 150 ps, very simple , reliable and more economic engine ! V6 is a pain in the ass and big waste of time and money, just some my opinion !
@@joesaric1 ive owned my chrysler 300c v6 CRD for few years now and i still love it. Ive replaced all the common faults including the broken gear shift plastic hook and these bastard seals, i would do it all again to keep it running. The engine has 180k on it and sounds sweet as a nut. I abuse it on race days and have nitrous running through the things a tank
There is a kit out there, can't remember from whom, that has all the seals for everything. I THINK it might be IDparts, but I bought it when I did mine and it was well worth the piece of mind to replace them all...
@@trentcarlson4857 i was extremely disheartened. Was off road for weeks and weeks waiting on a coupler joint for the mani's. I was balling about in a KA... finally got all back together and that happened... square fucking one. Gluing them poxy swirl motor clips back together... nightmare.
Hi merc man ive changed more than 30 sets of oil cooler seals mainly on w164's. I leave the thermostat housing on taking the long bolt out and leave the swirl pot motor attached to one half of the manifold. Disconnecting at one point towards the turbo, makes it slightly easier. Best time 5.5 hours drive in then road test all parts ready to go including brake cleaning oil down. Some do take longer, bolts on turbo and egr need to be changed other wise they have a greater chance of snapping for the next guy. Like your clip simple piece by piece break up. 😉
Hi buddy Do you normally just replace the seals and reuse the old oil cooler or you install a new cooler every time? Just about to order the parts as I am planning to do this job in the next 2 weeks. Thanks in advance.
Great video! I'm wondering how long does the fix last and have you seen any OM642 leaking again after replacing the seals? I'm viewing an 2012 ML350 this weekend and it has had the same issue and Mercedes fixed it with Mercedes parts in 2018. Mercedes replaced the oil cooler seal (MA642 188 05 80), oil cooler sing (MA642 180 01 65), and bunch of other gaskets. And looks like the Mercedes parts have defects and would not last long, I'm worried that the oil leak will happen again on the car I'm viewing in a few years. Thanks!
Mate I respect your patience but honestly I will never ever buy a new Mercedes only I keep OM606 I gave up with Mercedes new engine faulty technology with all my respect. Thank you so much for your Video Mate u are a legend 🫡 Cheers Matt
Hi @mercman, I believe I have this problem on my E350d. Are you based around South East London? Or do you know any garages that will fix this in the area? How much do you estimate the cost would be ?
Hello great video, I had a question: How did you cleaned the oil off. Ive replaced the oil coolers seals but i haven’t found a solution to clean all that oil out.
Just wow. I wish I could make a TH-cam car DIY video half as good as this 🤣. This is by all accounts a pain the backside job to do on these engines - however your instructional video is so good that makes it look doable (if I weren't so lazy these days). Subscribed, great channel - keep it up!
Great video. Thumps up from my side. Thank you for sharing. But please also add important information's for all watchers. 1. be careful at the moment where you are removing the turbo-holder. At time 3:33. There is a hole which goes directly to the motor-center. It is the oil channel of the turbo. If there some dirty stuff falls in, then you are risking a motor damage. Be sensible and clean it carefully immediately. And close with paper towels the hole before you proceed. 2. after you are done, please make an oil change before starting the motor. Water and dirty stuff is mixing through the oil holes under the oil-cooler. I got a lot information's where after this oil-cleaner change the motor got damaged through this dirt-water stuff. If you are done with the change of the oil-cooler and oil+oilfilter, then you should release a plug of motor electric and give some start tries to turn the motor/pump and so on. After several turns, plug the removed cable back. Start the motor and of course delete the occurred error message in obd. These are just my hints for the community in yt ;) Wish to all much success...
As u can see there is tones of work to do. For mechanics, they don't wanna take any risks of a bad cooler and also they need to make money from parts. TBH,I believe the main reason is they don't wanna take risk doing all of these shit again and if it's mechanic's own car they would change the cooler as well. Time is money.
From the video it's not that hard,I'm doing it right now,I know how it feels like. There is also a huge risk to damage other parts. Pretty frustrating.
Hi MercMan, I thought Mercedes knew about this problem way before 2012 and have had been using the purple seals ever since. Do you think the 2014, w166 series OM642 would have already been modified?
Hi, when you order the seals from mercedes they only supply the purple ones, you cant get the orange ones no more, i have done a 2014 c class W204 OM642 and they had the orange seals, so i think your W166 will have orange too..
fantastic video. I have to change my oil cooler and was wondering if I tackle it myself or fork out thousands for someone else. I was able to follow your steps so I feel a bit more confident about doing it Thanks
Are you UK based? What is the main cause for them to go in the end i have slight leak now, can it leak around engine sump? Or is it mainly by gearbox as you said?
Hi there where are you located? I have a Chrysler 300c crd 2006 with the V6 Mercedes engine and have the oil leak problem but can’t find anyone to do the job for me, I would like to come and see you about doing the job, regards Ergun
Thanks for the video, it was very good Question: is there anything someone can do to prevent (or reduce the chance) needing to replace those seals? Perhaps a different oil? I've got a 2007 R class with the OM642 engine. it has 215,000km, it gets an oil change service every 5,000km, using 5w-40. It hasn't had a problem (knock on wood). Thank you :)
Hi Ali, from my knowledge and experience these seals perish due to heat and where they are located, so i don’t think there is anything you can do to prevent it, the new seals however are modified to last much longer so the only cure is to change the seals..
@@mercmantips That's a shame. I've read about a ton of common issues with the OM642, including the oil drip from the turbo inlet, but I've solved that by installing a catch can. Makes me wonder how effective R&D was for this engine 😂. I guess I'll have to keep hoping nothing happens anytime soon. thank you (subbed)
MercMan Tips damn! 😂 i love the w164 shape believe it is half good engine once all small errors fixed? Do you find remapping these much better performance wise? Motorway etc take off
MB f*cked it up big time on this model. The leak does not stop until you replace the gaskets with the upgraded purple viton type. This tells you that MB acknowledges the issue but refuses eat the cost. The purple gaskets themselves are $5 each but the entire gasket kit is $105 retail at MB parts store. The local dealer charges 15-18hrs of labour, $240 per/hr being the current rate. This issue occurred on my 55k miles driven E350 Bluetec, its sad the owners have to pay for it. Otherwise, this is a good car and a good engine. This is an easy but time consuming job, however its doable by a DIY'er.
Wow, someone must have been smoking something funny when they designed that engine! I am looking at doing it on my 2012 ML.....Oh boy! MB have quoted me $4500 for the job...assuming no other issues found....Ouch!
Can you please list all the other gaskets that you replaced? One is manifold. What are the other ones? I will be doing this repair next week. Thank you!
if i could add one comment other than nice clear vid , one tip id add is when reinstalling intakes loosely install the bolts into the egr to exhaust flange shown at 2;48 in this video before you tighten down the bolts for the right hand intake manifold to save many stressful attempts to line up the bolt holes after the fact.
Remember to be very clean and before removing the turbo pipe or oil cooler to clean all the sand and debris. If you don’t sand or debris could find its way above the crankshaft bearing and seize the engine.. i have seen it happen when i worked for mercedes a few years ago.
Hi buddy Do you normally just replace the seals and reuse the old oil cooler or you install a new cooler every time? Just about to order the parts as I am planning to do this job in the next 2 weeks. Thanks in advance
An additional oil separator with crankcase gases must be installed on these motors. The engine will live longer, swirl flaps and particulate filter . На эти моторы надо ставить дополнительно сепаратор картерных газов с возвратом масла. Двигатель дольше проживёт , вихревые заслонки и сажевый фильтр.
Hi do you know of any products or companies that do this modification as a bolt on unit? Are you talking about a oil catch can/ breather type of mod? Thanks for the info too.
Looking at doing this myself, but not sure about what seals to buy. there are really cheap ones from China, and then there are the genuine Mercedes ones. The look and feel identical, but 1/5 price difference. Should I get OEM or cheapies?
Nice Video Mate. Wish I'd seen it before pulling the box and sump and then realising it cam from higher up, had her stripped in 2 hrs thanks to you. Bit longer back together. Thanks for taking the time to make the Vid.
Do you know maybe which motor oil is better for W203 220 cdi om646 without the Dpf ? ( Mobil1 0w-40, Oem Mercedes 5w-40 (229.5) or Mobil X1 3000 5w-40) ? Thx
Hello Mercman, I managed to reset the service light of my Daewoo Matiz. However, i have now started to get an unusual noise from the wheel bearing on my second car. What can you advise. It is a Fiat Multipla. Many thanks!
I have 2014 gl is it same engine? And can you please share how’d you clean all that oil before installation and what seals should be replaced? Thank you so much for your time.
![CAMPปลิ้น | EP.82[1/2] แก๊ง 3 สาวเพื่อนซี้บุก CAMPปลิ้นครั้งนี้ห้ามเสียอาการ](http://i.ytimg.com/vi/_6WUjXHe1TM/mqdefault.jpg)
FOR THE LOVE OF GOD! please everyone reading this comment remember to replace the O ring that sits on the EGR cooler under the manifold. I did this job with my ol' man and after a long time putting it all back together the engine coolant was pissing out the bottom so we had to start all over again from the beginning 😭😭😭 learn from our mistake and purchase that seal!!!
I think its better to own and maintain 220 cdi 150 ps, very simple , reliable and more economic engine ! V6 is a pain in the ass and big waste of time and money, just some my opinion !
@@joesaric1 ive owned my chrysler 300c v6 CRD for few years now and i still love it. Ive replaced all the common faults including the broken gear shift plastic hook and these bastard seals, i would do it all again to keep it running. The engine has 180k on it and sounds sweet as a nut. I abuse it on race days and have nitrous running through the things a tank
There is a kit out there, can't remember from whom, that has all the seals for everything. I THINK it might be IDparts, but I bought it when I did mine and it was well worth the piece of mind to replace them all...
I would puke. This might be one of the worst jobs i have performed.
@@trentcarlson4857 i was extremely disheartened. Was off road for weeks and weeks waiting on a coupler joint for the mani's. I was balling about in a KA... finally got all back together and that happened... square fucking one. Gluing them poxy swirl motor clips back together... nightmare.
Probably one of the best car repair videos I’ve seen, love the format of “show and do” simple but effective
Great video, am almost complete on doing a 2011 vito van, there is a few different things, but what a big job. 👌
This is exactly what I needed!!! Thank you so much. The editing was perfect to, straight to the point! Cheers mate
Hi merc man ive changed more than 30 sets of oil cooler seals mainly on w164's. I leave the thermostat housing on taking the long bolt out and leave the swirl pot motor attached to one half of the manifold. Disconnecting at one point towards the turbo, makes it slightly easier. Best time 5.5 hours drive in then road test all parts ready to go including brake cleaning oil down. Some do take longer, bolts on turbo and egr need to be changed other wise they have a greater chance of snapping for the next guy. Like your clip simple piece by piece break up. 😉
Thanks for the info sash, i will try your way next time 👍
where are you located any chance you can do my 2009 ml320
how much?
@@elpimpi7135 Australia victoria
Hi buddy
Do you normally just replace the seals and reuse the old oil cooler or you install a new cooler every time? Just about to order the parts as I am planning to do this job in the next 2 weeks. Thanks in advance.
Are you mechanic bro or ?
See i told everyone those engines weren't that scary...Thanks great informative tutorial im waiting on a gasket kit now...
JUST an observation, lot os oil on the turbo intake, need new breather valve and watch out for blow by.
GREAT VIDEO
This is the best approach so far. Thank you for posting this video.
Thanks for the comment, please subscribe if you have not already 🙏
can you make a video how you rebuild it step by step :) very nice work i love your Videos Thumbs up for you
I had that same breakdown 4 years ago with 170,000 km and my mechanic changed my oil radiator because he said that they went bad and were oval.
Great video still can't believe all this work to change a couple of oil cooler seals. Mercedes engineers.
😂
Imagine if they had just used the right seal material from the start.
Real Craftsmanship. ✌️
Great video! I'm wondering how long does the fix last and have you seen any OM642 leaking again after replacing the seals? I'm viewing an 2012 ML350 this weekend and it has had the same issue and Mercedes fixed it with Mercedes parts in 2018. Mercedes replaced the oil cooler seal (MA642 188 05 80), oil cooler sing (MA642 180 01 65), and bunch of other gaskets. And looks like the Mercedes parts have defects and would not last long, I'm worried that the oil leak will happen again on the car I'm viewing in a few years. Thanks!
Had mine replaced in 2013 on an OM642 CDI. Still dry in 9/2021.
Replaced mine in 2020 and it started ti leak again one week ago 😔
@@Mr.DIY.S.S.C could be seals that got fit unproperly during replacement
Mate I respect your patience but honestly I will never ever buy a new Mercedes only I keep OM606 I gave up with Mercedes new engine faulty technology with all my respect.
Thank you so much for your Video Mate u are a legend 🫡
Cheers
Matt
Hi @mercman, I believe I have this problem on my E350d. Are you based around South East London? Or do you know any garages that will fix this in the area? How much do you estimate the cost would be ?
Hey man! Love your vids. Keep up the good work. When the opportunity strikes, maybe a video on OM 651 timing chain replacement. Cheers!
and here’s me thinking that doing N57 oil cooler gaskets are a nightmare 😂
I need my seals replacing, how much does this guy charge to do the job, ill travel happily to get it done
did you ever find out ?
@@fctuning i just had mine done last week - paid £1200 at my local garage
Wow! Thanks for making this video. I see why the mechanic is charging 10 hrs of labour for a GLE 350 blutec.
Amazing skills!
Hello great video, I had a question: How did you cleaned the oil off. Ive replaced the oil coolers seals but i haven’t found a solution to clean all that oil out.
Great help. In the middle of this job for the first time and this just what I needed !!
Nice old sealing collection! Kind of trophys (-:
Thanks for the comment, please subscribe 🙏
yep, loved it too!
Reminded me of old western movies with Indian showing scalps
✌️
Doesn’t look like a diy project hehe
the high-maintenance design is why used Benz are amazingly dirt cheap
Don’t look like it, but it is. Just time consuming. Lots of parts but not that hard. Did it on my R330.
Just wow. I wish I could make a TH-cam car DIY video half as good as this 🤣. This is by all accounts a pain the backside job to do on these engines - however your instructional video is so good that makes it look doable (if I weren't so lazy these days). Subscribed, great channel - keep it up!
Had these done on my s350 last year at main dealer £1200 they better have put them purple seals in 🤞🏽
dealerships only use the OEM parts to yield prescribed life span.
Hows it been?
Mobile Disco Wirral spot on mate put 100,000 more on it since 👍🏽
Merc500 jesus wow amazing believe always change fuel filter alot to while your getting oil? I like the w164 shape loads
Mobile Disco Wirral cars now on 275,000 miles change oil every 8,000 it’s a working car all motorway miles 👍🏽
Wow 👍that’s a big job for a couple of seals, and by your collection you’ve certainly done a few! Thx for doing the video.
Can you share the torque specs for this job? Much appreciated.
I’ve been looking for the same info.
I usually tighten until they strip, then back off a quarter turn.
Great video. Thumps up from my side. Thank you for sharing.
But please also add important information's for all watchers.
1. be careful at the moment where you are removing the turbo-holder.
At time 3:33. There is a hole which goes directly to the motor-center. It is the oil channel of the turbo. If there some dirty stuff falls in, then you are risking a motor damage. Be sensible and clean it carefully immediately. And close with paper towels the hole before you proceed.
2. after you are done, please make an oil change before starting the motor. Water and dirty stuff is mixing through the oil holes under the oil-cooler. I got a lot information's where after this oil-cleaner change the motor got damaged through this dirt-water stuff.
If you are done with the change of the oil-cooler and oil+oilfilter, then you should release a plug of motor electric and give some start tries to turn the motor/pump and so on. After several turns, plug the removed cable back. Start the motor and of course delete the occurred error message in obd.
These are just my hints for the community in yt ;)
Wish to all much success...
Who’s also here for the hand signals 🤣🤣
Glad you love them hand signals
Definately best video about oil cooler Seals.
Thanks For the support and comment James, please subscribe if you have not already
James Parus agreed
What a disastrous design.
I wish i had superpowers like you. :))) touching parts to remove them and 1 single touch to reassemble everything.
Lol
Excellent job mate I was confused from two day I changed the main seal because of this leakage but now tomorrow I ll do this job regards
i have do the same
Excellent video! Thank you!
Question: Is there any reason to also replace the cooler itself when changing the seals?
As u can see there is tones of work to do. For mechanics, they don't wanna take any risks of a bad cooler and also they need to make money from parts. TBH,I believe the main reason is they don't wanna take risk doing all of these shit again and if it's mechanic's own car they would change the cooler as well. Time is money.
From the video it's not that hard,I'm doing it right now,I know how it feels like. There is also a huge risk to damage other parts. Pretty frustrating.
Hi MercMan, I thought Mercedes knew about this problem way before 2012 and have had been using the purple seals ever since. Do you think the 2014, w166 series OM642 would have already been modified?
Hi, when you order the seals from mercedes they only supply the purple ones, you cant get the orange ones no more, i have done a 2014 c class W204 OM642 and they had the orange seals, so i think your W166 will have orange too..
MercMan Tips naughty isnt it! Shame ! Found out they make them in alabama! Have you done any w166 yet? Might aswell keep my w164
MercMan Tips do you have any contact or name of garage you work in ease
fantastic video. I have to change my oil cooler and was wondering if I tackle it myself or fork out thousands for someone else. I was able to follow your steps so I feel a bit more confident about doing it Thanks
What do you mean $1500 in labor??!?! Its a 9 minute youtube video!!! Great work!
Are you UK based? What is the main cause for them to go in the end i have slight leak now, can it leak around engine sump? Or is it mainly by gearbox as you said?
NIce video, and very helpfull thaaanks!!
Thanks for the comment, please subscribe 🙏
MercMan, where is your shop or you have a website for your shop? I need to bring my ML350 Bluetec to you for this.
Hi there where are you located? I have a Chrysler 300c crd 2006 with the V6 Mercedes engine and have the oil leak problem but can’t find anyone to do the job for me, I would like to come and see you about doing the job, regards Ergun
Thanks for the video, it was very good
Question: is there anything someone can do to prevent (or reduce the chance) needing to replace those seals? Perhaps a different oil?
I've got a 2007 R class with the OM642 engine. it has 215,000km, it gets an oil change service every 5,000km, using 5w-40. It hasn't had a problem (knock on wood).
Thank you :)
Hi Ali, from my knowledge and experience these seals perish due to heat and where they are located, so i don’t think there is anything you can do to prevent it, the new seals however are modified to last much longer so the only cure is to change the seals..
@@mercmantips
That's a shame. I've read about a ton of common issues with the OM642, including the oil drip from the turbo inlet, but I've solved that by installing a catch can. Makes me wonder how effective R&D was for this engine 😂. I guess I'll have to keep hoping nothing happens anytime soon.
thank you (subbed)
MercMan Tips damn! 😂 i love the w164 shape believe it is half good engine once all small errors fixed? Do you find remapping these much better performance wise? Motorway etc take off
Hi MercMan Tips ! Great job , need this things changed on my car Where You located? Wonder how much time it take for this job ?
Can you do this job for me, I have a Chrysler 300c crd 2006 it has the Mercedes engine please let me know.
MB f*cked it up big time on this model. The leak does not stop until you replace the gaskets with the upgraded purple viton type. This tells you that MB acknowledges the issue but refuses eat the cost. The purple gaskets themselves are $5 each but the entire gasket kit is $105 retail at MB parts store. The local dealer charges 15-18hrs of labour, $240 per/hr being the current rate. This issue occurred on my 55k miles driven E350 Bluetec, its sad the owners have to pay for it. Otherwise, this is a good car and a good engine. This is an easy but time consuming job, however its doable by a DIY'er.
Wow, someone must have been smoking something funny when they designed that engine! I am looking at doing it on my 2012 ML.....Oh boy! MB have quoted me $4500 for the job...assuming no other issues found....Ouch!
Can you please list all the other gaskets that you replaced?
One is manifold. What are the other ones?
I will be doing this repair next week. Thank you!
this repair process cost by Mercedes benz service around 2600 euro its like (130 working hour +500 euro for materials ) its painful ):
Amazing amount of work. How long does the job usually take?
MB bills this as a 12 hour job. Definitely doesn't take 12 hours, but can range widely depending on skill level.
Subscribed already .
Lots of information .
Thanks .
if i could add one comment other than nice clear vid , one tip id add is when reinstalling intakes loosely install the bolts into the egr to exhaust flange shown at 2;48 in this video before you tighten down the bolts for the right hand intake manifold to save many stressful attempts to line up the bolt holes after the fact.
What year of 350 cdi did they fix this i have a 2012 cls with same problem, im selling it ina few days and want to buy a 2015 or 2016 cls 350 cdi
Remember to be very clean and before removing the turbo pipe or oil cooler to clean all the sand and debris. If you don’t sand or debris could find its way above the crankshaft bearing and seize the engine.. i have seen it happen when i worked for mercedes a few years ago.
Oh my! That’s more than I would be confident to try and do myself! But thanks for the video 👍🏻
Stright up all experience. But information or info from the start. Audio. ?
Are you for real all this experience ???
Hey MercMan, Did you have to drain the oil and coolant to do this job?
I dont drain the oil, but i drain the coolant or it will make a mess when you start removing the coolant parts
@@mercmantips Hi, please I need your contact details asap, my email is splitspectrums@gmail.com. thanks
as a general idea how much do you charge for a change? I have a jeep grand cherokee 3.0 CRD with om642 and I think I have same issue
That's a lot of work! Bad designing from Mercedes there.
Great video though. Love the music.
Love the trophy collection of seals :) Where are you based mate ?
I think have a same problem you have some address or you just do this movies? Grate job thanks for showing
Hell of a job, paid about 300euros to the mech for fixing that
My man.... Please... We have just noticed one of these leaks on our e350... Where are you based?
W212 2011 have same problem?
Hi buddy
Do you normally just replace the seals and reuse the old oil cooler or you install a new cooler every time? Just about to order the parts as I am planning to do this job in the next 2 weeks. Thanks in advance
I need this on mine. What does it cost to do this? Great video and liked the style.
How much will this cost on average to repairs plz reply my cars has the same problem just bought it 6 months ago 😭😭
How many hours you charge for this ? 15?
Great Vid, where are you based, I may have some work for you?
Thanks for the video. Fucking seals....
Thanks for the comment, please subscribe 👍
Do the intake valves need to be cleaned periodically? Thanks
An additional oil separator with crankcase gases must be installed on these motors.
The engine will live longer, swirl flaps and particulate filter .
На эти моторы надо ставить дополнительно сепаратор картерных газов с возвратом масла.
Двигатель дольше проживёт , вихревые заслонки и сажевый фильтр.
Hi do you know of any products or companies that do this modification as a bolt on unit? Are you talking about a oil catch can/ breather type of mod? Thanks for the info too.
Bonjour. Tu fais la mienne ? ??? Ml320 w164
I wish mine would come apart like that....
How much you charge for a service like this please thanks
Hi, cool video. How much to do this job on a 2008 GL320cdi? Where in London are you and what's your contact number?
Did you ever find this chap?
Thank you it's great Job 👍👍👍
Somebody from Northern Ireland help me with my merc
Excellent video
Hi. Great video. I have this issue on my merc c350. Can I bring it to you? What are your contact details or where is your garage? Thank you
Did you ever find this chaps contact details?
That's a great video indeed! Do you have the torque specs of all those bolts?
Anyone have them?
Plz merc man do mines for me 😭😭😭😭😭😭😭😭😭
Those trophies though. *shiver*
Looking at doing this myself, but not sure about what seals to buy. there are really cheap ones from China, and then there are the genuine Mercedes ones. The look and feel identical, but 1/5 price difference. Should I get OEM or cheapies?
OEM without a doubt you dont want to do this job twice
Would advice you drain oil and coolant first
Nice one mate where are you based, can I ring you to do mine as well?
mine leaks oil from the intake silencer resonator is it normal?
Great work, can I know how much it cost for this job?
Hey m8 where can i buy those purple seals?
Hi mate I have this problem where are you based
I need this job done on my CLS320. How do I make contact with you to book it in?
Did u Ever find this chaps contact details ? @mercman. Where are you based ? What’s your garage name?
How much torque needed for the two t45 torx bolts mounting turbocharger to the pedestal? Thanks for the video.
this is the best video i have seen greets
Thanks for the comment and support, please subscribe!
Nice Video Mate. Wish I'd seen it before pulling the box and sump and then realising it cam from higher up, had her stripped in 2 hrs thanks to you. Bit longer back together. Thanks for taking the time to make the Vid.
Some work what would job like that cost to do
Where do u get the new uprated seals from please?
Do you know maybe which motor oil is better for W203 220 cdi om646 without the Dpf ? ( Mobil1 0w-40, Oem Mercedes 5w-40 (229.5) or Mobil X1 3000 5w-40) ? Thx
Best video , thanks for this bro
This is already standard on this engine model, and all V6 engines have the same.
Hello Mercman, I managed to reset the service light of my Daewoo Matiz. However, i have now started to get an unusual noise from the wheel bearing on my second car. What can you advise. It is a Fiat Multipla. Many thanks!
I suggest you buy a Merc!
I have 2014 gl is it same engine? And can you please share how’d you clean all that oil before installation and what seals should be replaced? Thank you so much for your time.
Love the new intro!