High Crankcase Pressure DD13/DD15/DD16 (Relative Cylinder Compression Test)

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 มิ.ย. 2020
  • New Shop Info: goo.gl/maps/HzwG98iioszjQWRP6
    TAT Express Inc.
    972-225-3017
    4140 Langdon Rd.
    Dallas TX 75241
    In this video, I cover procedures on conducting a relative cylinder compression test for a DD13. Whenever high crankcase pressure is suspected this test can confirm if compression is being lost. This test is the same for DD13, DD15, and DD16. High crankcase pressure can be caused by multiple items, such as worn-out cylinder liner, postin ring, loose injector hold-down bolt, valve, or jakes out of adjustment. If you are troubleshooting an engine with high crankcase pressure than this test is good to conduct to ensure all cylinders are working correctly. A DD13/DD15/DD16 with high crankcase pressure can cause oil leaks and low power.
    Check out my other video on the DD platform. Common issues with the DD15 are a great video if you have just purchased or going to purchase a DD15.
    • Most Common Issues Wit...
    We also have a quick component location video for the DD15 engine.
    • DD15 Engine
    If this video has helped you in any way show your appreciation by buying me a coffee ☕️
    Cash App:$tatexpress
    Subscribe and ring that notification bell
    If you have any questions feel free to reach out to us at
    info@tatexpressinc.com
    New Shop Info: goo.gl/maps/HzwG98iioszjQWRP6
    TAT Express Inc.
    972-225-3017
    4140 Langdon Rd.
    Dallas TX 75241
    Join our Facebook group
    / 25176. .
    Check us out on Facebook
    / tatexpressinc
    ~-~~-~~~-~~-~
    Please watch: "TAT Express Live With Francisco Amaya"
    • TAT Express Live With ...
    ~-~~-~~~-~~-~
  • แนวปฏิบัติและการใช้ชีวิต

ความคิดเห็น • 92

  • @larrykussler3671
    @larrykussler3671 4 ปีที่แล้ว +2

    Very good video. Good info. Thanks for putting out your videos.

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Larry, I enjoy sharing. Thanks for supporting the channel. 💪🏼👊🏼🇺🇸🔧

  • @nathanielpoole2548
    @nathanielpoole2548 3 ปีที่แล้ว

    Good morning. I have a 2011 Columbia dd15. Driving down the interstate at about 70mph. Loss power looked on passenger side and saw oil from crankcase breather all the way back to the back of the truck. No warning. Truck would not start. Starter wet with oil. Able to bump it over but not enough battery. What would cause engine to shut down, no alarm or warning engine temperature was high too

  • @reggieshowtos9164
    @reggieshowtos9164 4 ปีที่แล้ว +3

    I will have a lot to learn from this channel. New suporter.

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Reggie, thanks for watching and happy to have you as a viewer. 👊💪

  • @redmesa2975
    @redmesa2975 3 ปีที่แล้ว +1

    Love that intro music !!

  • @josellanos9628
    @josellanos9628 3 ปีที่แล้ว

    I have dd15 2014 freightliner Cascadia I have a tick in the motor you hear when cold and oil pressure is 100 psi when starting and then idles down to about 60-65 psi and when driving it comes and goes but when it comes it feels like it wants to cut off do have any idea of what it could be

  • @supermariobronsmiranda6735
    @supermariobronsmiranda6735 ปีที่แล้ว

    Hello there sir. Thank you first of all for your very helpful videos. Question I have a 2012 DD15, I just noticed that I’ve been getting quite a bit of crankcase pressure through the oil cap(hopefully I’m explaining myself). Engine has a little over 1 million miles, now even though I see the pressure my coolant still perfect without any signs of oil. Can you kinda point me to what it could be? Would a cracked liner give me oil in the coolant?? Thank you sir.

  • @adelmujic1617
    @adelmujic1617 3 ปีที่แล้ว

    Hi, what software are you using? Tnx

  • @Tkmexpressllc
    @Tkmexpressllc 4 ปีที่แล้ว +1

    Great info!

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Tobie, appreciate the support. Be sure to hit that sub button.

  • @martinsantillan2538
    @martinsantillan2538 4 ปีที่แล้ว +1

    10/4 SIR!!👍
    THANK YOU!!

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Martin, thanks for watching.

  • @musseabdi2546
    @musseabdi2546 ปีที่แล้ว

    Will this show a head gasket issue? Thanks

  • @tmgvtransportes7997
    @tmgvtransportes7997 3 ปีที่แล้ว

    What's is the best engine for you in all this time?

  • @minhbao7863
    @minhbao7863 4 หลายเดือนก่อน

    Hi, could you please suggest what connector you use to connect from computer to truck?

  • @user-zt6bt8dp2c
    @user-zt6bt8dp2c 2 ปีที่แล้ว

    I have a Cummins just had my motor rebuild needed new block and now have high crank case pressure can hear the air after plugging valve cover outlet. They said might be the turbo if not they gonna have pull head off again.

  • @TJ-kx4bi
    @TJ-kx4bi 4 ปีที่แล้ว +1

    Thank you. Very informative. Has construction started yet on new facility

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Thanks for watching TJ. We are getting closer. 💪🏼🔧🇺🇸👊🏼

  • @singhsandhu8676
    @singhsandhu8676 3 ปีที่แล้ว

    Hey pls advice wat software or program are u using to test compression . And if u could pls drop me ur phone line I would like to speak to u when I get trouble with my DD 15 .
    Thx

  • @89081859838
    @89081859838 2 ปีที่แล้ว

    Where can I buy that computer software?

  • @darrinowens2542
    @darrinowens2542 4 ปีที่แล้ว +2

    Great teacher

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Thank you.💪👊🔧

    • @davidrodriguezherrera6271
      @davidrodriguezherrera6271 3 ปีที่แล้ว

      @@TATEXPRESSINC good afternoon I have a Cascadia with a DD15 with 800,000 miles the engine was leaking oil through the Crankcase Filter but a lot .. I replaced the filter and kept doing it but only on the climbs and very heavy when the trailer is empty it does not drop anything oil ... a workshop already removed the oil pan and checked the piston liners and you can't see a single scratch the compression test that you do in this video they did it to me and it's fine ... they want to change the turbo say that it may be that it is putting pressure to the engine by the oil return ... the engine does not show any symptoms of wear does not lose strength does not have faults does not burn any oil between oil changes ... you think that the turbo can be the cause? any recommendation I would appreciate thank you

  • @camerontempleton8898
    @camerontempleton8898 2 ปีที่แล้ว +1

    What software are you using to test with?

    • @911DavisCarrera
      @911DavisCarrera 2 ปีที่แล้ว +1

      He’s using the diagnostic link 8

  • @dnginc.transportation8379
    @dnginc.transportation8379 4 ปีที่แล้ว +1

    Great video , I have an issue with my freightliner m2 106 2010 . Check engine light on to much pressure on crank case and consuming oil. Just had pistons replaced but problem remain ? What could be the issue ?

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Thanks for sharing. DN, I would run a compression test.

    • @dnginc.transportation8379
      @dnginc.transportation8379 4 ปีที่แล้ว

      TAT Express Inc. thank you for your reply, I did and it’s high

  • @HRAA321
    @HRAA321 4 ปีที่แล้ว +1

    Hey boss... I have this code on my truck spn1328 fmi 31... injector 6 has been changed but still getting this code... I have noticed that this is showing with the engine cold... never show up with the truck hot or running on a highway. Any suggestions boss?

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว +1

      Hugo, I would recommend the compression test conducted in the video.

  • @mickromer6199
    @mickromer6199 4 ปีที่แล้ว +1

    Nice man 👌 our dealership also owns a fleet of stock trucks with a dd15s .. did this a month ago on one and got 50% on number 3... Ol mate was loaded with a B-double of cattle so had to get goin but hasn't come back yet 😳🤔 lol

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว +1

      Mick, thanks for the input. The truck will let him know when to stop.

  • @Samirphuyal33
    @Samirphuyal33 2 ปีที่แล้ว +1

    I’m having nightmare with my truck. Took it to shop more than 5 times with same issues. It’s 2017 cascadia dd13 402k miles. Truck ain’t got power and getting 6.13 - 6.33mpg . My load will be always less than 29k. And top speed I go is 67mph. Did tune up, pressure test and everything it needs. I’m still having power issue and burning lot of fuel

  • @MrNicong
    @MrNicong 2 ปีที่แล้ว

    DD13 def deleted showing solid yellow engine warning and cutting engine off. Will restart and run for a a few miles before cutting off again. A couple shops and they can't figure out what's wrong. Any ideas?

    • @musseabdi2546
      @musseabdi2546 ปีที่แล้ว +1

      Take it to the guy who deleted it.

  • @earnestbrackett1576
    @earnestbrackett1576 3 ปีที่แล้ว

    Do you do the same test on a 12.7 are 14l Detroit 60 series

  • @dougbesplug8851
    @dougbesplug8851 4 ปีที่แล้ว +1

    Do you perform the test with engine warm?

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Doug, a warm engine would give a more accurate reading. Thanks for watching

  • @nomad6199
    @nomad6199 3 ปีที่แล้ว

    Hi Adam, need some help.
    Trying to do a :
    Relative Cylinder Compression Test
    Using DDDL 8.9
    After complying with caution warning ⚠️
    The test log gives the following error:
    User aknowledged caution
    Engine is running in Compression Test Mode(NRC$1)
    The Automatic Compression Test service routine failed to run.
    Any ideas?

    • @nomad6199
      @nomad6199 3 ปีที่แล้ว

      Tried to
      1.swich key on/off/on
      2.Engage transmission then put it back to neutral
      3. Release then set back parking brakes
      Not working
      PS Truck was cold(do I need to warm it up?)

    • @nomad6199
      @nomad6199 3 ปีที่แล้ว

      DD15 engine

    • @TATEXPRESSINC
      @TATEXPRESSINC  3 ปีที่แล้ว +1

      Alex, be sure you are selecting relative compression test. Its not automatic compression test. Yes, running at temp will give you better readings.

    • @nomad6199
      @nomad6199 3 ปีที่แล้ว +1

      @@TATEXPRESSINC
      Hi, figured it out.
      Thank You
      Something with either software or the filter's drivers, reinstalled them and it worked like a charm.
      53% compression though in cylinder 3
      Seems to me that it will need an overhaul.
      Some white smoke and excessive oil out of crankcase breather.

    • @TATEXPRESSINC
      @TATEXPRESSINC  3 ปีที่แล้ว +1

      Be sure to run through trouble shooting before condemning engine. Depending on mileage as well. Valve train or loose injector hold down bolt can cause low compression and high crank pressure

  • @jayfive6971
    @jayfive6971 3 ปีที่แล้ว

    Good morning I had a 2016 cascadia Dyno’d dd15 engine 356,000 miles they said that it has 404 horse power with 3.4 blow by is that good or bad I’m not understanding the blow by scale they said the engine is healthy

    • @allatry23
      @allatry23 2 ปีที่แล้ว

      Mine is 3.3 blow I’m having white smoke come out Everytime I go up the hills what did they ever tell you

  • @abdihakimyaqub8940
    @abdihakimyaqub8940 ปีที่แล้ว

    I have 2011 Cascadia with DD15 replaced crankcase breather recently won’t crank at all if I shut of but I can jump start if someone pulls me out

    • @TATEXPRESSINC
      @TATEXPRESSINC  ปีที่แล้ว

      If the starter is not engaging, then I would recommend troubleshooting the starting system.

  • @benitojrromero8085
    @benitojrromero8085 4 ปีที่แล้ว

    On a DD15 over head valves is the feeler gauge .016 and the Exhaust .024

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว +1

      Bentio, that is correct. (in.)

    • @benitojrromero8085
      @benitojrromero8085 4 ปีที่แล้ว

      TAT Express Inc. thank you sir for your help

  • @felixsuazo8182
    @felixsuazo8182 11 หลายเดือนก่อน +1

    Can u perform compresión test on detroit serie 6

    • @TATEXPRESSINC
      @TATEXPRESSINC  11 หลายเดือนก่อน

      A manual compression test with all the correct test equipment is available.

  • @jDaniel-90
    @jDaniel-90 4 ปีที่แล้ว

    Question, i have a 2015 Dd15 approx 540k miles just recently i started noticing some black spots real minimal thinking it was oil i sent it in to Freightliner they did there test compression test and they stated it was Burnt Down Coolant. Is that the cause of it ?
    Thank You ..

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Trokero, thanks for watching. Is the engine consuming any fluids? Coolant or Oil

    • @jDaniel-90
      @jDaniel-90 4 ปีที่แล้ว

      TAT Express Inc. Negative ! I did a Oil sample on coolant before i purchased it .. no oil but it did state the test was cloudy so they changed the reservoir for me but im sure they didn’t do a proper flush ...

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Trokero, you are having black spots in coolant bottle. Does it look like it’s getting worse or staying the same?

    • @jDaniel-90
      @jDaniel-90 4 ปีที่แล้ว

      TAT Express Inc. im sure they just replaced reservoir & added coolant not drained the full system. What do you recommend ?

    • @jDaniel-90
      @jDaniel-90 4 ปีที่แล้ว

      TAT Express Inc. i took it to shop after i started seeing the black spots (Minor) i am going to monitor it closely & hope they dont keep pooping up

  • @martinsolis9671
    @martinsolis9671 4 ปีที่แล้ว +1

    Hey bud I like to know if there’s any chance to learn bout the software you’re using

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Martin, it is in the pipe line. Thanks for the support.

  • @stevepolanco0324
    @stevepolanco0324 4 ปีที่แล้ว +1

    Hey i have a dd15 after 6k miles oil starts to turn reddish, i have taken it to 4 shops and no one can find out the problem!!!

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      El nonote, is the oil level rising? If so, than I would recommend a oil sample be conducted.

  • @pat4532
    @pat4532 4 ปีที่แล้ว +1

    Sir you didn’t show how to set in PC

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว +1

      Rock, opening software and selecting the action button at top on screen then selecting relative compression test.

  • @marshnorville4962
    @marshnorville4962 4 ปีที่แล้ว +1

    DD15 REPLACED CRANKCASE FILTER STILL LEAKING OIL

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว

      Marsh, sound like high crank case pressure. I would conduct test in video

  • @quocbinhduongnt8646
    @quocbinhduongnt8646 4 ปีที่แล้ว +1

    xe này bị lỗi gì vậy anh ơi

  • @duaneporter4322
    @duaneporter4322 3 ปีที่แล้ว

    My dd15 is blowing oil out the blow by tube

    • @israelaviles5513
      @israelaviles5513 3 ปีที่แล้ว

      Did you find out the problem?

    • @duaneporter4322
      @duaneporter4322 3 ปีที่แล้ว

      @@israelaviles5513 crank case filter was bad now i have a bad value so I'm stuck

    • @israelaviles5513
      @israelaviles5513 3 ปีที่แล้ว

      @@duaneporter4322 my crankcase started leaking a little oil i guess I'm going to replace it

  • @Wazlonestar
    @Wazlonestar ปีที่แล้ว +1

    Why your shop is so expensive. You guys are charging dealership price.

    • @TATEXPRESSINC
      @TATEXPRESSINC  ปีที่แล้ว

      WH, we have a very professional and experienced team. Repairs done the first time correctly may not be cheap, but a cheap repair is only sometimes affordable.

  • @e7bk
    @e7bk 2 หลายเดือนก่อน

    I got on cylinder 4 82 then 92 then 89

  • @stilliraise9201
    @stilliraise9201 2 ปีที่แล้ว

    Wait. Don't people are saying dd13 are the worst engines on Detroit.

  • @robertoalonzo785
    @robertoalonzo785 4 ปีที่แล้ว

    I own a dd15. Ever since I bought it it's been giving me bad fuel mileage. And no power on hills. The previous owner deleted DEF, Regen and ERG. Could this be the cause of all this?

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว +1

      Roberto, we see a lot of engines with low power due to bad deletes. Have you do the compression test?

    • @robertoalonzo785
      @robertoalonzo785 4 ปีที่แล้ว +1

      @@TATEXPRESSINC Don't think so. What's the purpose of this test?

    • @robertoalonzo785
      @robertoalonzo785 4 ปีที่แล้ว

      I usually deliver around the metroplex area. I live in Mission TX. Can I just stop by at your shop and get it checked out? How much is your rate per hour or diagnostic?

    • @TATEXPRESSINC
      @TATEXPRESSINC  4 ปีที่แล้ว +1

      Roberto, we can definitely help. A compression test will give us a idea of the condition of engine. If compression is good we can test fuel system and check for boost leaks.

  • @oglaredo9565
    @oglaredo9565 4 ปีที่แล้ว +2

    Gang