Plywood Wall! - NO Nail Holes!
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Today we install the Okoume Plywood using some crazy effective glue, rebating and patience
First track is “Darling” by DJ Quads
TH-cam: www.youtube.co....
Soundcloud:
/ djquads
Second track is "Morning Jog" by Hi Malachi / hi_malachi
...
I'M ON INSTAGRAM TOO
www.instagram....
The below are affiliate links. I get a small percentage when you buy using these links. It does not cost you anything extra, but helps supports the channel. Thanks!
My Tools
Tool belt amzn.to/3dXMZnk
Tool belt shoulder straps amzn.to/3AI0VLU
Hammer with wooden handle amzn.to/3jRhQ92
Rubber grip for hammer amzn.to/3jTM7UE
Speed Square amzn.to/3yAaE5f
Makita Circular Saw amzn.to/3qYzaKH
Track Saw amzn.to/3dV9wkF
Awesome ratchet clamp amzn.to/3dSGa6s
Impact driver (main drill) amzn.to/3xDmBat
Other drill for pilot holes amzn.to/3yAYjh4
My Table Saw amzn.to/2UzuOxp
My favourite vacuum (newer version) amzn.to/3yxss0S
Full face mask amzn.to/3hH4Cce
Ear muffs amzn.to/3yNAWBl
Green line laser level amzn.to/3yqYdJ0
The Camera Gear I use
Main Camera amzn.to/3AD2if5
Backup Camera amzn.to/3jTGTbv
Main Lens (main camera) amzn.to/3wp0hzU
Lens for Backup Camera amzn.to/3jWaFfU
Microphone amzn.to/36pNWAA
Tripod amzn.to/3yxSeCb
Headphones amzn.to/3xqm2R4
Drone amzn.to/3xp9OrO
Aeropress (Coffee) amzn.to/3ijpvdQ
Donate here if you want to help the channel, thanks!
www.paypal.com...
SEND STUFF TO HERE
PO BOX 3506
Richmond 7050
New Zealand
Disclaimer:
These videos are intended to provide information and inspiration only. If you choose to imitate, duplicate or copy anything you may have observed in these videos, you do so at your own risk. Scott Brown Carpentry Ltd does not take any responsibility for any action taken as a result of the information or advice on this TH-cam channel and shall not have any liability in respect of any injury or damage that may result.
To view full disclaimer, click here: www.scottbrown...
Instead of putting blobs of adhesive behind the board put small circles of adhesive. It holds it back better to the wall especially if the boards arn’t quite straight. The small circles act like suction cups. Sounds daft but works
Yep creats a vacum
Great advice
Also has much better drying characteristics, vs. a blob that might not have any air exposure in the centre. Usually recommended for mirror installation.
@@jacobmailman Is it it better to do small circles across or a squiggly line across if i'm going to use the same amount of adhesive?
@@timetraveller9690 The reason people do blobs is because it prevents gaps in the event there is a dip or a bow in your board and when you squish and press the board against the wall it'll naturally spread your adhesive. I've never tried circles, but the squiggly line would be worse as you would get the "suction" or vaccum effect they're referring to. If you know both surfaces are perfectly straight then the most glue surface area as possible is beneficial, which is when you should use the squiggly line to save glue and maximise glue surface area.
Blobs to ensure glue is connecting to both surfaces. Circles for suction. Squiggly line for even coverage.
5:55 and 12:40 got a bit excited to see that grain wrapping going on. Most people will never notice the hard work put in to make that happen.
Yep, I noticed the care in matching the grain on the adjacent pieces. Nice job. Wish builders in the US could do as nice a job but there’s a rough and ready quality to workmanship in this country. I was an architect in Sydney before I came to the US. I never anticipated the poor standard of work here. Looks like New Zealand and Australia knows how to do it right. Thanks for the video.
Second time watching this vid and caught that on the second watch. Gorgeous!
One of my favorite parts of a video like this is watching the eyes of the craftsman when they are really concentrating. That's the difference between a good job and a great job. He really cares about the details.
You get what you paid for.i am sure he is not very cheap but worth it amazing job he does ✌️
Picking up heavy hints of Neistat in the video edit... made me quite nostalgic. Nice build.
It amazes me how you can be my favourite youtuber when Im not even close to being a carpenter. Your doing something right mate. Keep it up
i read "it amazes me how you can be a famous youtuber when you re not even close to be a real carpenter...." Should get an hour or two more sleep i guess
Yeah Amazing. no nail wall... Glue... and nailed. Terrible.
@@johnsmithington3167 no nail HOLES
@@TEAbAGGINGmASTER Oh was that in the title? You eat any lysol yet?
There's just something calming about his videos. Great editing. No hype, just easy to watch, listen to and of course, watching someone excel at what they do be sports, or carpentry, is always inspiring and fascinating.
I’m a mature age apprentice Chippie in Brisbane, and try to watch everything you put up, to pick up all the tips/tricks etc! Big fan of the stuff you do mate!
Thanks mate!
Tx, next time someone calls me uncle I'll say no, call me mature age apprentice...
I've never seen spray paint elevate aesthetics by this much, ever.
If your sticking boards on I find it better to do circles with the silicone/glue , when you push the board on it acts like a suction cup, Good job looks great
Chris Kane this guy knows whats its all about
@@jamatoke there isn't really a right or wrong way to do it mate, The comment was more for a DIYer or an apprentice using a lower quality of silicone and even on a rough or uneven wall not a fresh boarded wall, And the need to avoid 2 part glue, It can be expensive if you can't justify the need to buy it (I use it for kitchens)
@@chriskane9230 I think he was complimenting you mate... but still an informative comment... cheers
May want to consider using aluminum Z-clips as panel fastening. Alows panels to be installed plumb and corners can be square. Wood and drywall expand and contract at different rates, meaning eventually something will give... Hope this helps
I would suggest you run your Paulk Workbench over your table saw and cut it in half lengthwise. Then install two side panels so you basically have two narrow Paulk Workbenches. They will store the same in your van, will assemble as a single bench with two squeeze clamps at the ends holding the two halves together, but will be much lighter to carry around. You might even find that you prefer working with a half bench better, but you have the option of the full. Also, the half benches will store in your van on edge so they will take up less space.
THAT...is just what I was looking for!!! what a great solution to router the edges to maintain a perfect shadow gap! About to embark on a full height room at home with this look - and you just solved a major problem ! Great work guys - love the attention to detail!
Love to see two tradesmen producing fine work and having great craic at the same time.
I liked the reminder also of your beautiful country's genius contribution to pie gastronomy, steak and cheese.... brilliant!! Happy memories of visiting New Zealand and touring in a camper, must look at getting down again!
Great channel.
😂 that's great man, glad you enjoyed it
I've already watched this twice, and just noticed; it's funny to hear someone outside of the U.S. to say "five Mississippi's" as a way to count off some time. :) Keep up the good work Scott!
Growing up in Canada we always counted either by steamboats or Mississippi.
First time I've EVER seen someone just that Plumb and level line method!! I've been using that for 25 years to custom fit mirrors tight between walls. Exactly like what you do Plumb line a level line eight measurements off of those and you have an out of square custom fit mirror tight to all the walls! Outstanding
I can't even get a tradie to show up and here's two at work, doing a great job AND letting people know if they've accidentally broken something. Unicorn!
Fantastic work. Love your craftsmanship, light humor and no drama business sense. Btw, in case anyone cares, that "level line" you refer to @2:20 is called a "datum".
Just a little tip from a uk Carpenter here......apply the gun adhesive in circles, that way when you push in place, it’s creates a little suction, and it’s less likely to pull away :) love the vids by the way bro ;)
My brain tells me that would create high pressure cavities that would tend to push the board apart. My brain isn't known for always being right.
Randall Mitchell well it works, try it and you’ll see :)
@@solobuilder7451 Your presented qualifications support your statement better than my thoughts unsupported by experience or research 😄.
Really liked hearing the explanation on the reason for the rebates and reference lines. Keep sharing your knowledge!
Fix all is amazing adhesive, you can paint over, it never cracks.
Handy tip:
You can clean this adhesive with baby wipes from your hands or tools when it's still fresh!
Did a similar job about a month ago. I use tongue and grove method instead of a lamp joint between the black stripes and also use cladding bracket or what ever they are called. Like the way it look the only thing that hits my eyes is seeing the face of the plywood and the edge of the plywood at the corner joints.
That’s some smooth carpentry there, hope the home owner appreciates the high skill level and flawless finish
Thanks pal
Yeah but he's still waiting for his $5 🙃
I think the home owner do, Scott and Pareau keeps coming back to this house.
How could anyone dislike this.
Looks like walls in an uptown exec office or museum.
Very pretty work.
The black rebate frames the plywood beautifully
Humor and sarcasm on a construction site is universal😁👍
That is one of the best looking walls I have ever seen! If someone told me to cover a wall with plywood I'd think they are nuts. Now? Not so nuts!
Awesome!
Architectural-grade plywood is a whole other level of quality than the construction grade stuff seen in big box stores.
Of course, execution by the carpenter is key, and Scott nails it. (pun intended)
Birch ply is some of the tastiest looking cladding there is.
@@alanr745 I've seen hoop pine used as soffit on a job,I was installing longline 305 wall cladding , finished product was stunning.
@@alanr745 what do you mean "pun intended"? this is a nail-less wall! u crazy
I have put my wall using mdf coated with melamine which is far better than 12mm plywood. U don't have to sand and polyurethane. One of major problem of plywlod is they come in bending. U have to nail at the end.
Ha! I didn't know the Mississippi was an international counting standard. Good work!
Came to comment the same!
The English speaking world over counts Mississippily. 👍
😂😂
We use it in Norway too hehe
In Denmark we use cases of beer 🙄
This is so nice. Wish there was more videos showing the process of plywood walls on youtube
6:52 I like how u used the Japanese hand saw instead of a jig saw. Real astute!
Started my working life as carpenter then went into mechanical heating and ventilation fitting...wonderful to see such attention to detail with perfect execution...
As a framer, I wish I had more time to spend filming things like you do. Love the videos Scott! Keep crushin' it.
Yeah like only finish guys have spare time to Set up a camera.
Yeah, you got to get the job done, plus filming, it's a bit of an ask.
nice to see another framer legend commenting on others. started building my own tiny house, learned all framing technique from you bruh!
Go pro
Hi Matt which cities you are ?
What a true joy it is to watch what so many think so wrongly is a simple thing, done so well!
I didn't know people from other countries used Mississippi to count too :-).
The walls look great!
Fellow carpenter(USA)
Fantastic job Scott and crew. This way of solving problems helps me a lot in renovating my 120 years old half-timbered house in the middle of germany, where there are no straight surfaces or 90 deg. angles. You just got a new subscriber. Stay safe and regards.
Well this was a random YT video that appeared in the Up Next and it was really interesting. The black rebate a simple idea but what an impact to the design & finish.
Wish I had seen this before lining our lounge with Okoume face ply (also called Rapid Ply here in N.Z), we butt joined our sheets on the studs, but there was still a small gap here and there, which didn't really look that great when filled with "no more gaps". The gap filler and the Okoume cant really be sanded that well, so we just got a rough looking join and painted over it. Negative detailing is the only way to go!!! Something I find useful is a couple of adjustable steel tent poles. The pack down to 1.6 metres long and extend to just about double that. You could use them with a block to hold up the ceiling or door frame pieces of ply. I use them to hold shower liners in place too, they lock off with a small triangular headed bolt and with two people you can get significant pressure on them. Love your videos, very entertaining and helpful, thank you!
7:10 the sound of the router goes well with the music!
im a cabinet maker and when we glue out splashbacks on we silicone we do little circles not blobs because it creates a suction cup and sticks on better and easier you should give it a try
chiefpete Hmm have tried the suction cup thing still unsure if it works o
chiefpete or not don’t really understand how it’s suction works
Nice job ! This looks a lot like the composite pannels we install on commercial building, using strips of flat black aluminium for between panels and 90degree ones for the corners
Very good finish to a tricky job bespoke joinery 10/10 ! Bigger firms here in uk would supply everything over size then the site lad would make it work cutting everything again precise probably having to run the router down the edge after it had been finished with the paint ... I’m on your level cut, manufacture and install there onsite... no mistakes. Very impressed
Thanks mate !
Carpenter in MB Canada. Insane how different we build. Keep up the awesome work guys.
Kyle GUY the whole video I’m just thinking “these poor folks have no idea their house was built using the wrong measurement system.” Haha cheers from The States - love the content!
@@davidpritt5080 haha we use both systems in Canada, we're trying to move away from imperial.
Just wonder why they needed to have the sheetrock at all. Why not just build directly off the studs and build it like a stage flat with a 1 x 2 grid frame behind for additional structure across the ply if needed? Would this idea make sense if you were doing new construction and wanted a plywood wall? (I am working on a lab room that needs to have mount-points anywhere on a wall and not just for aesthetics) I think maybe they came in after the sheetrock was laid and decided to work on top?
Looks Great! We do a similar install on commercial projects. Only we don't use or rely on glue that can over time give way with expansion and contraction (happen d to us before) Instead we now use hidden panel clips that are invisible once installed and are more reliable then just glue. If there's an error you can always unsnap, correct your mistake and re-snap into place. Makes for easy accessibility for future in case you ever need access to the for wall outlets or anything else.
Absolutely wicked. Been wondering for some time how this was made - now I know! Keep it up Scott. Lovely channel!
Thanks Ruben
Scott's videos make me feel like NZ is the most pleasant place on Earth. Every project seems so fresh and enjoyable.
cool project! Well done, and NO NAILS, love it. AND when you are finished the owner hammers some 3 inch nails smack in the middle for his pictures, LOL
LMA🤣
This just gave me a fantastic idea for my laundry room. The house is older so want to have access. Will frame but create these panels but use Allen key screws to hold panels in place. That was if I need access it is easier than drywalling etc.
Pretty slick! Funny how plywood linings are so foriegn to (what seems ) the rest of the world.
Lol I know right . Love the channel btw bro
Wood paneling takes more time than sheetrock, so it is not used as often... And when it is used, it is not precision fit, but rather relies on edge pieces and moldings to hide the edges. Cutting it so precise that you can leave the edges visible like in this video is not done by builders because it increases the time (and thus money) spent on labor. They would do it cut to the nearest half inch and then rely on molding to cover the gap. I had an aunt that I remember as having had mahogany paneling in her living room 50 or so years ago... I visited her maybe 20 years ago and discovered that at some point, she had decided to have it covered with sheetrock so that it could be painted a light color and be brighter. What a waste...
@@jakeblanton6853 it really doesn’t when you add in the time it takes to have it finished. The cost would mostly increase in material. Also finish carpenter leavening a half inch gap should be sent home not called back. 1/8” expansion gaps were used in older homes but modern paneling butts or gets an aluminum trim.
@@SurelyLightFoot -- I'm going by what I remember from back in the '70s with respect to the paneling that I saw and the houses that I saw in the '80s and '90s with sheetrock. Paneling back then was often done with a piece of quarter-round, inside corner, or outside corner mouldings where walls intersect, although the panel to panel fitment was directly touching and if done right, you would not see the joint. I'm sure that some of it was because the walls were not perfectly straight and there might have been a difference in the width at the top vs the bottom, but by having the mouldings there, it allowed the installers to be a bit sloppy in their cuts. If your intersecting walls do not have any moulding at the intersection, then you're going to have a noticeable line even if you are a sawblade thickness off, whereas if you have a 3/4" moulding that goes there, you don't have to be as accurate.
Now, on a side note, do you remember the "board and batten" style of siding that came about as sawmills developed and we moved away from log homes and to lumber framed homes? By putting the batten over the gap between adjacent boards, you closed up the air gap while also allowing for the siding boards to not be perfectly fitted to each other. It's actually a pretty useful technique and it is still used today, although more as an architectural design use than being functionally necessary. If you are a DIYer and building a shed, large dog house, or whatever and do not have someone else to help you handle the larger pieces of lumber, the board and batten style of siding makes it easier for you.
just wanted to thank the fans for committing to this journey with me. i love you guys so much, none of this is possible without ya’ll seriously. XO
So nice watching a video and when people talk about measurements they use the metric system!
Nice job! These walls reminds me of the sound proof panelling you get in slightly more modern theatres, music halls and recording studios.
ok..so seeing youtube online vs thru my TV flatscreen shows the "READ MORE" and above it you added 1st song "DARLING" by DJ QUADS. Thanks!!!! Wish I had seen it on my laptop a year ago wondering and wasting time. NOW I KNOW HOW TO FIND SONGS ON ANY VIDEO...and find it via youtube videos. BIG THUMBS UP! its really a catchy song Scott.
I like doing DIY jobs for my friends and myself. i really look forward to your videos. great to watch real craftsmen at work , a joy to watch ! ! ! thanks
im in the same boat....and only recently, as in today, found this vid. I am still in AWE of the skills shown here. WOW. BRAVO!!!
My Basement Contractor clad all the walls with 1/2 Plywood before installing the Drywall and the Insulation. Super Job, very strong, and solid..
Neat job. Same method I use when fitting wet wall panels in shower enclosures.
thanks for the rebate-tip!! That's exactly how I want my the plywood on my cieling to be! 😀
Quality work, plywood's been around for 150 years, shame it's so underrated ....
david hoop pine ply isn’t underrated in Aus if price is any indicator ;)
Sxcitment and Brilliance...! Great Wall workflow and video, the close ups are super.
From experience applying you glue in circles it creates a suction
Love the look of the plywood panels. A tip I learned from mirror guys, if you make a circle with a thick bead of panel adhesive, you will have a suction cup after you push the air out. This is very effective with heavy panels and ceiling work. Nice work, love the video, keep rocking it!
THE stripe on your t shirt at the beginning matches your van..... I see some merchandise opportunities....
There is a story behind that just going to have to watch some of his videos
Looks like a terrific job and fantastic wall covering. Just the idea I needed. May I ask what type of plywood and thickness it is, please?
Love this channel. Try circles with the glue it acts like a suction cup
Hey there.. I am chethan 22 year old from India.. I am thinking of doing this plywood business, but my parents tell me that you should not do that, but I love that I have lot of ideas in my mind about this business... What do you suggest me because you're experienced one,
Holy Crap! They count using Mississippi in New Zealand?
We use it in Norway too hehe
And the uk
Lol... oh yah!!!
I suppose, in New Zealand, they could use Whanganui instead of Mississippi.. or maybe I’ll use it here in the US just to be different.
@@chrishaug and Canada aha
Yep we sure do!
Oh and I'm from Wanganui and I don't know why we never thought of that 😅
We love our tracksaw too! Had to take off 7mil from 1200 to plumb a cabinet against some poorly built drywall....cant beat it
To be honest id much prefer wood paneling rather than drywall. Looks way cleaner. Higher end. 👍
theres a lot of commercially available hardware for hanging panelized interiors. try z clips or one of the many fabrications by monarch metals. much safer than relying on adhesive.
Awesome project. Did you end up edge banding all the exposed edges??
Wait ... I already watched this video before. Good for you Scott Brown Carpentry. Good for you.
Is it usual over there to not apply edgebanding on panelling jobs like this one?
Was wondering the same thing
He should of rebated those windows one to match the edge rebate
If a customer asked me to line their wall in ply I’d of thought they were crazy. You guys have done a good job and it looks great.
Imagine a guy doing the maintenance on this 40 years later :-)
Pure Rage!
why? I'm no carpenter (obviously) what will the issue/s be in 40 yrs time ?
staffcarpenborg anything... new pipes.. running electrical.. moving a wall
jomsart
It’s plywood construction. Warping ? Poor execution?
The most irritating thing about our industry is knowing that some “armchair/weekend warrior” type is spouting off about another mans efforts. Post your resume’ next time. Love to see it.
Those last pieces being fitted in at the window is satisfying to watch. This is one nice wall. Awesome stuff.
No cuts where the inner layers pop out leaving a void?
Must be some pretty good ply
literally shows that at the end
Hi Scot. When using glue to apply sheets on ready made wall try to apply glue in shape of circles. When pushed against the wall glue will spread a bit and it will act as vacuum, sort of, giving more grip between sheet and wall
Looks good except I don't like seeing the ends of the plywood that are exposed.
Newbie here from Philippines....i like the way how you install those woods. I love the idea same as your other vlogs been watching it & i learn a lot. I will use it when i will make my own tiny house...Thank you & God bless.
It was like listening to a foreign language...... I only caught every 3rd or 4th word 😂😂😂
Ps. Awesome work, I wish there were talented craftsmen like you in my country 👍👍👍
In the middle of a self build at the moment. Having seen the finished wall, its a feature I'm now seriously considering. It looks great.
Use a laser to create a datum line and you can’t go wrong, glad to see fix all being used in New Zealand, sumo grip is better (UK) though. Excellent craftsmanship though. Big fan, big thumbs up 👍
Cheers Rich!
you need to screw the drywall more as it is the support for plywood, then run a continuous bead of glue around edge of panel followed by a smaller circle bead of glue in the center as it creates a air pressure fit guaranteed to never come loose. I have done this, interesting finish BTW
What type of adhesive do you use? I'm wanting to do 1x4 wood slats on my ceiling with 1/2" exposed black gaps. I'd love to not have visible nail marks if possible. Any tips?
Nice vid last you've just given me the best idea for one of my rooms, brilliant. Rubber dub subbed.
If all guys are as nice as you are, it makes me want to move to NZ and work and live there!
In the 70s my mom had wood paneling in her basement too... The more things change the more they stay the same I guess.
Thanks for the tip about the reference line. Appreciate that. Thanks for the video have a good weekend.
Cheers man , happy to help
Hi, what is the black tape you're using at the edges?
that was paint.
@@epsospremium6088 It is not clear: what is painted with paint? What kind of plane is there? It’s hard for me to ask questions: Google translator writes nonsense))
Владимир, мне кажется, они выбрали четверть с обратной стороны и закрепили туда планку из более тонкой фанеры в плоскости задней стенки стеновой панели. И вот именно эту планку они и красят чёрным.
He explains it around 9:00
Thats the neighbourhood I grew up in … YAY for Ponsonby !!!!
The only thing I miss from NZ, meat pies!
Another option to put the plywood up with no fixings is split battons. It does create extra gaps that you will have to fill, but is removable.
Edge banding the sides would have made it perfect
They make edge banding that looks like the edge of plywood. It's a look.
I love how different the building techniques are in new Zealand as they are here in the UK. But not only that the breakfast is so much different too. Wtf is a steak and cheese pie??? In the UK the only viable breakfast for anyone in the building trade is a triple breakfast baguette with extra grease
Similar to a pasty from greggs etc but waaay better and more variety
Were you wearing a shirt at the start of the video with the same decal as your van? That's an awesome move!
I was thanks
Great great great... as a carpenter I always wanted to do that on some projects, the only big problem that I have is the walls are not straight enough here in Norwest Pacific and the wood frame has lots of movements. Sometimes I miss steel European structures level and plumb forever. Cheers guys very fine work.
How good is Soudal, we use it everywhere. Much more user friendly than sika
Not really. Just cheaper 🤣
Wow I'm very impressed i totally appreciate your layout and approach skills that are simple but so complicated all at the same time... great job guys!!!!
"67% of the time it works 100% of the time"
Plywood wall finish... In Canada we screw drywall over it ;)
Too easy to scratch the minute wood veneer....
like the way your videos start by saying you got brown hair
When using high tack I like to make little circles on the back of the plywood works like a suction cup.
Hey Scott. Great job on the plywood wall. Just curious, Does Paerau work for you, or is he also an independent contractor? If he is independent, how do you bid the job, and split the proceeds working as 2 companies? Cheers
madebyMichael according to a previous video, Paerau is a builder just like Scott and they work together when the job is big enough. I’m curious as to how they split wages too
@@MustardMade Thanks, I did see that previous video, but it did not explain how their partnership works.
madebyMichael as a kiwi, I’d say fiddy fiddy split. They both find jobs. Awesome work!!
Scott. Your Videos are so cool man. I live in Australia and am renovating my first house. You have given me such good insight of things i want to do. Thanks mate.
Carpenters: "I'm a mil out", "There's a gap between the gib and the jam", "steak and cheese pie", "looks mean bro".
Americans: wat
Kiwis, Americans, ;-) The fush and chups caught me completely by surprise, too! :-D
Cos in New Zealand and here in the uk us carpenters measure In millimeters which is a lot easier to understand and it’s more accurate.
This question may have already been asked, if so, I apologise for not reading all previous comments. Why take the extra time manually setting up the track for every rebate with the router, why not use the edge guide on the router set for the correct width from the edge?