Thanks for taking the time to post this video! It helps interpreting the directions. I know this video is a few years old, but the instructions and part numbers changed a bit. But the basic steps still apply. If doing this alone, some of the bolts and nuts are impossible/difficult unless you have very long arms. One trick is to use get the nut and bolt together and then use a small amount of the sealing tape (or duct tape) on the nut to "hold" while tightening on the other side.
Started to put this together today (got up to the tables but it was raining and didn't make sense to put weatherproofing on yet... Probably could've gotten the roof on). The instructions suck, so this video was my salvation. Thank you!
I’m glad to see that it takes only 30 minutes and 29 seconds minutes to install. Seriously, thank you so much for the video. For all your efforts, The shed company should compensate you.
My Mom lost the instructions and this video was how I put mine together so thank you and also shows you the quality of the video . Granted I do have construction experience but this video really really help! Thank you !
Good job, I’ve been rewinding this video all day today lol ugh we spent 8 hours on this damn shed today! Had to take breaks, it was 94 here in Denver Colorado today, we still have the top middle part to put on the roof and the doors to do tomorrow after work! Ours is on a big wooden base
Thank you so much for making this video! I’m going to use it while assembling 2 of the 8’x10’ sheds! You explained everything so perfectly, I’m not afraid to tackle these bad boys at all! Then I have to assemble the 10’x12’ version!
Really good points to look out for. I have had two of these sheds at different houses and they are amazingly long lasting for the money. Mine was $309 including tax. The base cost almost as much. I bought nine 2x6x8s and two 2x6x12s plus 3 sheets 3/4 inch plywood (everything weather treated. Cost was $188. Good job Tasty, great voice adds Value to the listening.
You’re the best man, this video truly helped, I got half way with the build and I was getting confused with the instructions, but your videos made it more clearly on how to get this done now
We are in the middle of building this nightmare shed as I watch your video. Thank you for posting as watching this video and referring to it for the ladder half will help for sure
Dude you’re my hero I haven’t watched yet but I tried to put mine together last week and the instructions were awful, this will be conquered this weekend
Man I wish I found this video earlier! Spent a day working through the instructions. We have the top to build and your video was very helpful! I know we can get this done tomorrow! Thanks for sharing!
Thanks for this fine video! Arrow should pay you a fee👍 it was a bit of a challenge even with two of us. Some small spring clamps helped hold pieces while assembling. Also a magnetized cup holder for screws etc. For us it took easily 2 days steady. Best to you and allergies.😆
Great video,I’m on day 2 and my daughter and I will be installing roof, I would’ve trimmed that tree first in your video because I see them branches crashing down on your well built shed, thanks for the video. We painting ours and bolting it to our deck.
Hey Toasty, Interesting how 11 people gave this a thumbs down. LOL. I always watch videos from others before starting a project and I made no exceptions with this shed. I am a pretty handy guy myself, but like to see what mistakes others make so I don't have to learn the hard way. Your video is far and away the best step by step video I found. So from one professional to another you can see why I am puzzled by the thumbs down of the 11 geniuses that apparently snapped their fingers and the shed magically appeared. I do not post TH-cam videos but am going to do a short for this shed. If you don't mind I would like to add your link for the step by step assembly. I am basically going to share some info to help speed up the process vs. taking the manual at its word. I'm not doing an assembly video. Thanks for the great video and God Bless. Chazz
Nice video content! Sorry for the intrusion, I would appreciate your initial thoughts. Have you heard about - Mahorrla Wooden Paradise Method (just google it)? It is a good one of a kind product for building better sheds and woodworking without the headache. Ive heard some incredible things about it and my buddy at last got cool results with it. 👍😎
Me and my wife just built one of these sheds this weekend. Pain in the butt putting together. You're video is way better then the directions. Wish I would've watched youre videos instead of directions
YOU ARE A LIFESAVER! A friend of mine gave me his storage building, used and unassembled of course. However some of the numbers are rusted making it impossible to read them. I have the instructions which are pretty easy to understand but it's hard to actually distinguish one part from another at times just by looking at it on paper. Thanks a million for sharing!
You should've gotten paid for this video. The blueprints in the manual are very small and hard to decipher at times. Your video helped greatly I appreciate it.
Thanks for the video. I think instead of swinging the camera around showing the completed parts, maybe an overhead, stationary view would help. Most of us are pausing the video several times to keep up.
Thank you so much , best assembly video ever (not just shed assembly video but best assembly video ever)). I absolutely subscribed right away and so should everybody else
Anchoring is key. And after many years when the base has rusted again it's time to replace or repair. I had an older version at my rental take flight during a storm a few months ago.
Yeah, me and my boy just put one together in 12h including building a wood platform. We wasted a lot of time sepperating the washers and putting them on the screws. I would recommend to buy the smallest self taping screws with rubber washers so you don’t need to mess with the cheap screws they supply you with. This shed build wore me out.
bought a 6x8 but the corners had no ID on them . watched ur video and it was great , helped me big time . didnt know that the corners were different sizes ? had to rebuild it . poor instructions. didnt see any dimensions on this video for panels . would have helped . great video anyway . thanks guys
I see that you put this shed up a couple years ago. How is the roof holding up. I am going to put on up. I am in northern Wisconsin where we get a good amount of snow. I will be putting some extra support. Great job explaining how to assemble. Thank you!!!
Looks good. I just did one. An wanted to see what the differences were. No rubber seal. An wasn’t sure where to use that tape. How long did it take you? I did it by myself an that’s was not such a good idea.
I've got one similar to this one that I bought 20 years ago and left it on my front porch in the box for a number of years before I got around to unboxing it, had some surface rust issues and will be painting before assembly, I've got the manual around here SOMEPLACE but have all the hardware, mine's a 10x9 1/2 (I think) your video is definitely helpful, thanks.
This makes me feel better about leaving mine sit for 3 months. It was delayed delivery for a month, and by the time I got it, it was our rainy season. So I'm finally putting it together!
I've just got the walls done up, never did find the manual so I'm winging it, next is the roof, it's been interesting, I just turned 70 today and am doing this all by my lonesome, rust removal and rust thru I "fixed" with silicone caulk and plasti dip covered with primer and paint, hopefully rust bleed thru won't be too bad. I built 4 2x2 wood jigs for initial construction to hold corner panels up till I got the top pieces screwed in, I'm paying for my procrastinating on not doing something with the kit, a real pain in the butt, holes don't line up, 1/8" drill makes it all work after a fashion, it's all a customized job at this point.
Use self-tapping screws or make your own holes if there's parts that don't quite line up. It even says in the manual that things might not always line up so you might have to make your own.
My wife and I have been putting this together for two days and we are just now putting the walls up. We noticed they did not put the holes in the right place so I drilled some of my own. Have you had that problem?
interesting points ,if anyone else trying to find out backyard storage sheds plans try *WoodBlueprints. Com* Ive heard some decent things about it and my colleague got cool success with it.
I know this video is old the only i purchased this past summer actually had a floor base support. Like a H-Pattern that went across the flooring. I see that your's has the inserts for the H-Pattern florring support and you didn't install it in this video. was that something you ended up doing later on ?
No, I poured a concrete floor so there wasn't a reason to do that for myself. I just concrete anchored the edges/floor of the wall into the concrete. But that's cool if it comes with it now.
The instructions in this build were the worst I’ve ever seen. I wanted to make a video but o found yours and will recommend it to others. I still built it on my own but I’m glad this is up, might have saved me some time and frustration.
I would put a rubber gasket and use caulk to seal the floor base to the deck or concrete to keep water from coming in the base . i did that with my older arrow shed but want to buy a new one for the odds and ends stuff
We did it...I prepped steps 1-4 but not doors..and prepping those doors would've helped to. The base took long...we used 16x16 cement blocks... it's all good too!!
Sorry for the newbie question but does the shed come with hardware to secure the metal base to the concrete slab? I have an existing slab but I’m wondering how to secure it. Thanks.
Thanks for the video. I just wanted to comment for anyone else it took us, two people, a total of 7 hours from start to finish. No way you can do this alone.
Hey man great video. Just wondering what editing software did you ise for this video. I like how you are able to film this and have the instructions up in the corner
My dork son refuses to wear anything but his sandals while assembling our shed. I cringe watching him on the ladder, and later when he takes his socks off. His feet are covered with dirt.
I'm just curious as to how you were able to reach the bolts that tie the panels together at their highest point near the center. I'm of normal height and don't see how I'll be able to reach.
I may have used a step ladder? It's been a few months so not sure. I did have a friend helping so it's possible he was on the outside holding something.
Thanks for taking the time to post this video! It helps interpreting the directions.
I know this video is a few years old, but the instructions and part numbers changed a bit. But the basic steps still apply.
If doing this alone, some of the bolts and nuts are impossible/difficult unless you have very long arms. One trick is to use get the nut and bolt together and then use a small amount of the sealing tape (or duct tape) on the nut to "hold" while tightening on the other side.
Started to put this together today (got up to the tables but it was raining and didn't make sense to put weatherproofing on yet... Probably could've gotten the roof on).
The instructions suck, so this video was my salvation. Thank you!
I’m glad to see that it takes only 30 minutes and 29 seconds minutes to install.
Seriously, thank you so much for the video. For all your efforts, The shed company should compensate you.
It takes most 2 weeks.
Haha
@@jackfrosty4674 I can build wooden shed faster and cheaper.
My Mom lost the instructions and this video was how I put mine together so thank you and also shows you the quality of the video . Granted I do have construction experience but this video really really help! Thank you !
Good job, I’ve been rewinding this video all day today lol ugh we spent 8 hours on this damn shed today! Had to take breaks, it was 94 here in Denver Colorado today, we still have the top middle part to put on the roof and the doors to do tomorrow after work! Ours is on a big wooden base
How did you build the wooden base?
@@christopherschertner499 get some pallets people give away for free then just throw some plywood on top
How big does the foundation need to be ? Exactly 8x10 or slightly bigger
OUTSTANDING VIDEO!!!
You made the build of my shed much easier and saved me allot of time!!
Thank You!!!
Thank you so much for making this video! I’m going to use it while assembling 2 of the 8’x10’ sheds! You explained everything so perfectly, I’m not afraid to tackle these bad boys at all! Then I have to assemble the 10’x12’ version!
What have you done so far ?
How did it turned out
longer screws before start. Go buy screws 1/4 inch longer for ease.
9:47
I don’t think I would’ve been able to complete this build without your video
Thank you it sure help me out on my moms shed it took me three weeks to build 3-4 hours a day. You guys help me out 🎉🎉🎉
Thanks for the video. My son and I are nearly done with our 6' x 8' shed (we have a small backyard in San Francisco.) I used your video for reference.
I'm so happy I found this video! It's exactly what I was looking for before I started assembling. Y'all are very detailed and clear. Thank you!
Really good points to look out for. I have had two of these sheds at different houses and they are amazingly long lasting for the money. Mine was $309 including tax. The base cost almost as much. I bought nine 2x6x8s and two 2x6x12s plus 3 sheets 3/4 inch plywood (everything weather treated. Cost was $188. Good job Tasty, great voice adds Value to the listening.
I was wondering whats cheaper the concrete or the treated wood 🤔 do you know???
What did you used the plywood sheets for?
Where did you purchase yours from?
@@Mark300win floor
You’re the best man, this video truly helped, I got half way with the build and I was getting confused with the instructions, but your videos made it more clearly on how to get this done now
Man brother thank you.....if it wasent for your great video i would have never finish....thanks a million
I have to assemble one of these for a client tomorrow. Thank for this video
Y'all crushed this!! Thank you so much for this fantastic video. Like may others, I would not have been able to complete this shed w/o this video...
We are in the middle of building this nightmare shed as I watch your video. Thank you for posting as watching this video and referring to it for the ladder half will help for sure
I have one of these sheds in my back yard that is ready to be replaced, but we've had it well over 30 years.
30 years??? Seriously? I was hoping for 5 years.
I too just took down my old metal shed of about 35 years..just purchased another but a little smaller size...
@@markrhuett Thanks this just confirmed my purchase in these sheds. That's incredible.
Tornado took the last one I had, it grabbed it and tossed it who knows where? never saw it again.
@@grimsonforce7504 I have one that is 20yo and all i did was paint it so far. still in good shape.
I'm bout to start mines.. I watched your video first.. you did a great job.. thanks.. wish me luck..
Dude you’re my hero I haven’t watched yet but I tried to put mine together last week and the instructions were awful, this will be conquered this weekend
Just got to the price and damn inflation is a bitch
Man I wish I found this video earlier! Spent a day working through the instructions. We have the top to build and your video was very helpful! I know we can get this done tomorrow! Thanks for sharing!
Must have been loads of pollen 😂 we counted all the sniffs.
Great video and very helpful thank you!
Yeah. Pollen
Even my shed is 8x6 this video helped me a lot. thank you very much.
Thanks for this fine video! Arrow should pay you a fee👍 it was a bit of a challenge even with two of us. Some small spring clamps helped hold pieces while assembling. Also a magnetized cup holder for screws etc. For us it took easily 2 days steady. Best to you and allergies.😆
Great video,I’m on day 2 and my daughter and I will be installing roof, I would’ve trimmed that tree first in your video because I see them branches crashing down on your well built shed, thanks for the video. We painting ours and bolting it to our deck.
I have followed your video while looking at the instructions. Life saver and lots of irritation. Thanks
That’s an upcoming project for me. It was great watching it get done ahead of time!
Omg thank you for this video, i loooove TH-cam for videos like these😁
Hey Toasty, Interesting how 11 people gave this a thumbs down. LOL. I always watch videos from others before starting a project and I made no exceptions with this shed. I am a pretty handy guy myself, but like to see what mistakes others make so I don't have to learn the hard way. Your video is far and away the best step by step video I found. So from one professional to another you can see why I am puzzled by the thumbs down of the 11 geniuses that apparently snapped their fingers and the shed magically appeared. I do not post TH-cam videos but am going to do a short for this shed. If you don't mind I would like to add your link for the step by step assembly. I am basically going to share some info to help speed up the process vs. taking the manual at its word. I'm not doing an assembly video. Thanks for the great video and
God Bless. Chazz
Nice video content! Sorry for the intrusion, I would appreciate your initial thoughts. Have you heard about - Mahorrla Wooden Paradise Method (just google it)? It is a good one of a kind product for building better sheds and woodworking without the headache. Ive heard some incredible things about it and my buddy at last got cool results with it. 👍😎
Maybe some are turned off my the sniffling and snot swallowing of the narrator?
Thanks for this up and beyond video 👍 appreciate you doing all the work showing how it's done 👍👏 gracias señor 🍻
Me and my wife just built one of these sheds this weekend. Pain in the butt putting together. You're video is way better then the directions. Wish I would've watched youre videos instead of directions
Do you know how to makes the doors stop making squeaky noise
YOU ARE A LIFESAVER! A friend of mine gave me his storage building, used and unassembled of course. However some of the numbers are rusted making it impossible to read them. I have the instructions which are pretty easy to understand but it's hard to actually distinguish one part from another at times just by looking at it on paper. Thanks a million for sharing!
That's what I'm doing right now. Been a lot easier to buy a new shed.
The best shed installation video,great video well explained.
MAN! BIG ONE HUNDRED ON YOUR VIDEO! Extremely Helpful! BY FAR THE BEST ONE FOR THESE SHEDS⭐️⭐️⭐️⭐️⭐️✌🏾
You should've gotten paid for this video. The blueprints in the manual are very small and hard to decipher at times. Your video helped greatly I appreciate it.
He gets monthly ad revenue from TH-cam for the commercials you watch on his channel.
Thanks
I am actually working on one right now.
I was able to complete mine by myself using neodymium magnets and self tapping screws where things wouldn't line up. Turned out great!
Thanks for the video. I think instead of swinging the camera around showing the completed parts, maybe an overhead, stationary view would help. Most of us are pausing the video several times to keep up.
Very helpful video,thank you. AND that was a bad ass VANS hoodie! 🤗
Paid 99$ this video may have saved me and my sanity
Thank you
what?! was going to say it's $500 where I'm @ damn
Thanks. Best shed assembly video I've watched. It should really help when mine arrives later this week 👍
make sure spot level. Level and square so screws line up.
It looks good, now realizing it’s not what will work for me but glad I figured it out before buying so thankyou
I hate the bad diagrams on the instructions guide, very helpful this video.
ikr the instructions weren't really that helpfully Lol
Worst video
Great info just bought the 12x12 this will really help with assembly
Nicely done Toasty DIY. This video was s huge help. Thanks for sharing..
Thank you so much , best assembly video ever (not just shed assembly video but best assembly video ever)). I absolutely subscribed right away and so should everybody else
Thanks for this video. I’m using it as I do each step/page in the book
I got one of these from a discount shop. Instructions totally in French lol thanks for this video
This shed has been a b**** lol finally putting roofing on the instructions that came with it bunch hogwash. Thank you for ur video it helped so much!!
Thanks bro a lot easier than reading the dame instructions 😆
Always love the amateur camera super fast panning shots, back and forth, guaranteed to make you dizzy.
I have my first shed job how much should I had charge for a 12 x 12?
144 12x12=144
Anchoring is key. And after many years when the base has rusted again it's time to replace or repair. I had an older version at my rental take flight during a storm a few months ago.
Good to know about anchoring. Had the same problem with the old shed my FIL had installed
Yeah, me and my boy just put one together in 12h including building a wood platform. We wasted a lot of time sepperating the washers and putting them on the screws. I would recommend to buy the smallest self taping screws with rubber washers so you don’t need to mess with the cheap screws they supply you with. This shed build wore me out.
I listened and not watched ..video still helped ..for moral fortitude
I used spray foam on mine after I assembled it worked really good
Spray foam where,any pics?
Thank you, this was helpful building mine.
bought a 6x8 but the corners had no ID on them . watched ur video and it was great , helped me big time . didnt know that the corners were different sizes ? had to rebuild it . poor instructions. didnt see any dimensions on this video for panels . would have helped . great video anyway . thanks guys
By far this is the best video I have found for this shed. Thank you so much for posting!
Awesome video. It helped me a lot. I'm mostly done. Gotta do the roof tomorrow
Thanks you sir I am very very appreciate your job you explained everything detail I am thinking to buy soon
Very good video
Thank you I find this very helpful as it is the same shed I'm building!
I see that you put this shed up a couple years ago. How is the roof holding up. I am going to put on up. I am in northern Wisconsin where we get a good amount of snow. I will be putting some extra support.
Great job explaining how to assemble. Thank you!!!
Thanks for making this video! Great work very clear teaching.
Loving the video but wish you could have slowed down a bit with your camera and show each completed section.
Looks good. I just did one. An wanted to see what the differences were. No rubber seal. An wasn’t sure where to use that tape. How long did it take you? I did it by myself an that’s was not such a good idea.
I've got one similar to this one that I bought 20 years ago and left it on my front porch in the box for a number of years before I got around to unboxing it, had some surface rust issues and will be painting before assembly, I've got the manual around here SOMEPLACE but have all the hardware, mine's a 10x9 1/2 (I think) your video is definitely helpful, thanks.
This makes me feel better about leaving mine sit for 3 months. It was delayed delivery for a month, and by the time I got it, it was our rainy season. So I'm finally putting it together!
I've just got the walls done up, never did find the manual so I'm winging it, next is the roof, it's been interesting, I just turned 70 today and am doing this all by my lonesome, rust removal and rust thru I "fixed" with silicone caulk and plasti dip covered with primer and paint, hopefully rust bleed thru won't be too bad. I built 4 2x2 wood jigs for initial construction to hold corner panels up till I got the top pieces screwed in, I'm paying for my procrastinating on not doing something with the kit, a real pain in the butt, holes don't line up, 1/8" drill makes it all work after a fashion, it's all a customized job at this point.
Use self-tapping screws or make your own holes if there's parts that don't quite line up. It even says in the manual that things might not always line up so you might have to make your own.
If you don't pour a foundation for this, can you put it on concrete blocks if you had enough of them and set them up?
Was wondering the same thing. Did you ever get it finished?
My wife and I have been putting this together for two days and we are just now putting the walls up. We noticed they did not put the holes in the right place so I drilled some of my own. Have you had that problem?
So we were wrong. We put the walls in the wrong place and it threw us off. We finished the whole thing after a month.l
interesting points ,if anyone else trying to find out backyard storage sheds plans try *WoodBlueprints. Com* Ive heard some decent things about it and my colleague got cool success with it.
Having gotten to the part where you put up the walls (suspended due to high winds), I'd do a stick build next time. Cheaper and more straight forward.
I know this video is old the only i purchased this past summer actually had a floor base support. Like a H-Pattern that went across the flooring. I see that your's has the inserts for the H-Pattern florring support and you didn't install it in this video. was that something you ended up doing later on ?
No, I poured a concrete floor so there wasn't a reason to do that for myself. I just concrete anchored the edges/floor of the wall into the concrete. But that's cool if it comes with it now.
Great job lad how long did it take you put it up all together
I needed step 7 the most but you flew through it
Thanks for the heads up but I got dizzy trying to keep up with your camera..
The instructions in this build were the worst I’ve ever seen. I wanted to make a video but o found yours and will recommend it to others. I still built it on my own but I’m glad this is up, might have saved me some time and frustration.
Is the shed fairly sturdy, or mainly for storing yard tools, such as ladders and lawn mowers?
we had trouble figuring out the sliding door track, which of course you guys skipped. Anyway it was helpful
Thanks for tutorial. What was the total build time?
Can this boy fit under a deck easily, or would it be impossible to bolt in the top screws for the roof? Thanks
Would it be OK if I use self tappers from the inside out? Since I have no space on the side or back due to walls being on the way. Is it possible?
Thank you! The instructions were so confusing to us lol
Very new to all this and was able to get one of these sheds for free. How did you anchor it to the concrete pad?
I'm going to do exactly what is done on these videos👍👍👍
Nice work, bud.
I would put a rubber gasket and use caulk to seal the floor base to the deck or concrete to keep water from coming in the base . i did that with my older arrow shed but want to buy a new one for the odds and ends stuff
Thank you so much!! We had the corner pieces on backwards and were losing our damn minds.
Did anyone screw down the base in a few spots before putting up the wall? Is this a bad idea or ok to do? Thank you in advance 😅
Doing this now. Center shots on roof panels do not align. Bottom and top do, but middle support doesnt line up.
We did it...I prepped steps 1-4 but not doors..and prepping those doors would've helped to. The base took long...we used 16x16 cement blocks... it's all good too!!
Sorry for the newbie question but does the shed come with hardware to secure the metal base to the concrete slab? I have an existing slab but I’m wondering how to secure it. Thanks.
Thanks for the video. I just wanted to comment for anyone else it took us, two people, a total of 7 hours from start to finish. No way you can do this alone.
Hey man great video. Just wondering what editing software did you ise for this video. I like how you are able to film this and have the instructions up in the corner
Sony Vegas Pro is what I use but Premier Pro would work well too
Great video It def took me longer than 30 mins
Thank you very much your video was very helpful
So should I wear flip flops too when I install my shed?
I don't advise it 😂
I'm wearing flip flops as I assemble mine 👍
My dork son refuses to wear anything but his sandals while assembling our shed. I cringe watching him on the ladder, and later when he takes his socks off. His feet are covered with dirt.
I'm just curious as to how you were able to reach the bolts that tie the panels together at their highest point near the center. I'm of normal height and don't see how I'll be able to reach.
I may have used a step ladder? It's been a few months so not sure. I did have a friend helping so it's possible he was on the outside holding something.
Awesome video, helps a lot. Thanks.
Very helpful. Thank you👏
BEST VIDEO ABOUT