Awesome run! Thanks for the tips on replacing the droop screws! That's going to definitely come in handy making it easier to adjust. Those other mods you did are pretty clever too, especially how clean it looked when the body as raised for those huge batteries. BIG UPS!!!!!!
Hey Richard 👋 , loved the video man . I'm in middle of getting ready to try & hit the 100mph as well . Your video is a awesome inspiration 👏 man . Im currently running the standard set up & electrics . I've got 50k in front & back diffs , silicone pkugs in the center diff . I've tried a 46t spur & a 27t pinion . So far I've hit 120km with very little traction & it wanting to flip at full throttle. Thats with getting to half throttle quick then easing to full throttle. I may have gone a little to quick to full throttle im not sure. Since then I've bought some deep dish Hoons to help with traction & stop the ballooning. With your experience, what do you think this set up is capable of doing ? I just wanted to know if I'm heading in the right direction. Keep up with your very informed videos & speed runs there a great inspiration. Thanks & hope to hear from you soon 😊
What's your take on cappack farad size. You say your running 1000 farads. I'm currently running 6 2200 farads caps. I'm worried the 2200 farads aren't discharging fast enough to keep up with mosfets cycling speed. I'm currently rite around 9% voltage ripple with my 4s and 6s lipo runs but feel I could do better. I made my own cappack using Panasonic audio grade f series 8s caps.
This is the dilemma everyone has. You have to try different setups for your own cars as so many variables come into place. Try different sizes and voltage and do runs with the same setup and log data 😃👍🏾
well done .im in Melbourne great see other ARRMA fans iv got a nero..and cant keep wheels down lol i seen heaps of punch setting vids on here but still cant get it right lol any tips
+DFSW05 187 thanks man, simple fix buddy just change the diff oil to a higher weight or cst say 100k in the front maybe 70k in the center and 30k rear. Maybe keep the pinion gear lower also with punch settings on 3,4 let me know how you go.
@@WigganRC thanx buddy i see what your mean i just sat my xlx on top of the spot where im going to mount it and it is tight,thanx again for the advice sir #Keep on bashing/speedrunning.
Thanks for watching 👍🏿 the body mounts are the stock ones that came with the Typhon. I just drilled new holes so it would sit higher to take larger batteries. 👍🏿
Thanks buddy. A spool is just the center drive that replaces the centre differential. It means the drive is then locked. A spool has a spur gear and bearings usually and it drives the centre dogbones that gets drive directly from the motor that in turn drives all the 4 wheels. Hope that helps to explain 👍🏿
Spools are ready and if you’re interested. Check out this video Arrma Kraton GPM Aluminum Upgrades and Custom Spools for Sale th-cam.com/video/jKeTyIbTJU8/w-d-xo.html
I feel the need...... the need for speed. Lots of great technical info here. Congrats on smashing that 100 MPH record.
+Master Miscellaneous thanks man 👍🏿
Awesome run! Thanks for the tips on replacing the droop screws! That's going to definitely come in handy making it easier to adjust. Those other mods you did are pretty clever too, especially how clean it looked when the body as raised for those huge batteries. BIG UPS!!!!!!
Glad you got some tips dave hope to see some more of your speed runs soon 👍🏿
Thanks!
great job you finnaly got what you where wanting to acheive gratz
john richardson cheers buddy 👍🏿😜
nice work richard congrats.... and great cam work by Michael
+Deadman RC thanks man
Making it Happen, Great Runs Indeed. Congrats !!
Hey Richard 👋 , loved the video man . I'm in middle of getting ready to try & hit the 100mph as well . Your video is a awesome inspiration 👏 man . Im currently running the standard set up & electrics . I've got 50k in front & back diffs , silicone pkugs in the center diff . I've tried a 46t spur & a 27t pinion . So far I've hit 120km with very little traction & it wanting to flip at full throttle. Thats with getting to half throttle quick then easing to full throttle. I may have gone a little to quick to full throttle im not sure. Since then I've bought some deep dish Hoons to help with traction & stop the ballooning. With your experience, what do you think this set up is capable of doing ? I just wanted to know if I'm heading in the right direction. Keep up with your very informed videos & speed runs there a great inspiration. Thanks & hope to hear from you soon 😊
Some hit 160 with hoons but wreckon Grps are better or racing banana skinz. Best of luck
Nice job man. Thanks for the tip on the body mounts!!! Know I can run my SMC batteries!!
Thanks buddy. Hope you subscribe to the channel 👍🏾😀
@@WigganRC sure did man. You do great work!!
very nice bro,congrats on the pb!!!!! thats a great idea on those droop screws. i will b doing it to mine,thx
+big will thanks buddy. Use the M4 cap head screws 👍🏿
Congrats
What's your take on cappack farad size. You say your running 1000 farads. I'm currently running 6 2200 farads caps. I'm worried the 2200 farads aren't discharging fast enough to keep up with mosfets cycling speed. I'm currently rite around 9% voltage ripple with my 4s and 6s lipo runs but feel I could do better. I made my own cappack using Panasonic audio grade f series 8s caps.
This is the dilemma everyone has. You have to try different setups for your own cars as so many variables come into place. Try different sizes and voltage and do runs with the same setup and log data 😃👍🏾
Where did you get your Hub extenders
Hey nice video I watch all of them. Do you still make spool for the typhon
Thanks buddy. Nah stopped making them for now. 👍🏾
Ok thanks
@@WigganRC Hello Happy New year! Question, I would like to run wheel spacers but not sure where to buy. Could you please help me? Thank You!
Check Ebay
@@WigganRC Thank you sir🙂
well done .im in Melbourne great see other ARRMA fans iv got a nero..and cant keep wheels down lol i seen heaps of punch setting vids on here but still cant get it right lol any tips
+DFSW05 187 thanks man, simple fix buddy just change the diff oil to a higher weight or cst say 100k in the front maybe 70k in the center and 30k rear. Maybe keep the pinion gear lower also with punch settings on 3,4 let me know how you go.
Nice pb sir,question how did you mount your mamba xlx esc because i have the same one.
Just sat on an aluminum plate and drilled the holes to match
@@WigganRC and your rc body was still able sit down on the top with out the esc getting in the way of the body clips
Keep it as low as possible and was fine but tight 👍🏾
@@WigganRC thanx buddy i see what your mean i just sat my xlx on top of the spot where im going to mount it and it is tight,thanx again for the advice sir
#Keep on bashing/speedrunning.
Nice pass mate but I thought you would’ve gone quicker with that ESC and gearing.
Doing good with your speed runs, i see you like ARRMA products!
+mtctookie25 thanks man. Might try some other brands next but a good starting point with spares available here in Australia 👍🏿
Good going with cars that are available in your area, easy finding parts.
+mtctookie25 yeah 👍🏿
Nice video man, but the way where i can get those rear body shell extentions
Thanks for watching 👍🏿 the body mounts are the stock ones that came with the Typhon. I just drilled new holes so it would sit higher to take larger batteries. 👍🏿
That's fast.
Really enjoy your videos! I'm thinking of getting into speed run cars and was wanting to know what you meant by "Spool"
Thanks buddy. A spool is just the center drive that replaces the centre differential. It means the drive is then locked. A spool has a spur gear and bearings usually and it drives the centre dogbones that gets drive directly from the motor that in turn drives all the 4 wheels. Hope that helps to explain 👍🏿
Thanks for being my 300th subscriber 👍🏿
Spools are ready and if you’re interested. Check out this video Arrma Kraton GPM Aluminum Upgrades and Custom Spools for Sale th-cam.com/video/jKeTyIbTJU8/w-d-xo.html
Nice run👍🏼👍🏼!!! Great video!!
Cheers buddy 👍🏿
Nice video 👍
+Rc Fun thanks man
How many tooth pinion gear is it a mod 1 gear?
Yeah mod 1. Using between 29-34t
What length are your wheel extenders?
+Travis Batiste 37mm www.ebay.com.au/i/142511366376
Thanks
Wiggan RC
Are those the 1/8 grps or 1/5 ... also with these extenders do the wheels just pop on or do they need another type of adapter
+Reg Lev they are 1/8 grps and fit straight onto the 17mm stock wheel nuts. Don’t forget to subscribe my man 👍🏿
Hello where can I find those wheel extensions?
Bro what are the specs of your cap packs?
1000uf 25v capacitors 👍🏾
Wiggan RC thanks brother. Have u try using hobbywing ezrun for speed run?
No not yet. May try it one of these days 👍🏾
what are the wheels and how can i get them
Steve MacDonald they are called Grps from hobby heroes in the usa. Hope you enjoyed the video 👍🏿
Wiggan RC love it thanks thats like crazy fast dude big 👍
+Steve MacDonald cheers buddy. Looking forward to ripping up some tarmac with this new setup 👍🏿
Wiggan RC give eh looks good
+Steve MacDonald cheers man 👍🏿