Just purchased this Goldstrike trunk LED light for my 2019 DCT Tour AB. Thanks for the video, will help me through the installation process. Looks very nice!
I've just installed a Goldstrike trunk light but I couldn't have without your excellent tips - especially how to route the wire from the hinge area to under the seat, which is not mentioned in the instructions. Thanks for posting; you saved me hours!
Easy to follow video. Just received mine kit, looking at the written instructions was little confusing so i followed yours to a tee.. thanks. Nice addition to my 2020 gold-wing tour.
Dr. Freddy, A buddy of mine just traded his beloved Harley Ultra Limited for a 2019 GoldWing DCT Tour and is ecstatic about it. th-cam.com/users/maikeli7
I bought the same light at the last Wing Ding in Nashville. I brought it home and decided to install it myself. Googled the installation and found your video. I watched it in segments till I was finished. Your video was quite helpful. I'd like to take the time to thank you for the good job. Your effort is appreciated.
Thank you Freddy, I just brought a 2019 gold wing a just added led brake light and the led light at the top of passenger seat. Videos are awesome, keep them coming brother, took me 3 hrs,
Thanks for the instructional video I will tackle that install next week I am a new subscriber as I just purchased my 2019 tour dct and have a lot of accessories to install
Great Job Freddy! I Love my Goldstrike rear taillight! I also installed the Electrical Connection running light add on for running lights. I did not install the Ciro rear strip light as my Honda Rack would block its view. Ride Safe! Just watch your lighting so you are not blocking it and the occasional sound quality. The intro was da-bomb too!
Just finished installing my flag. Thanks for taking the time to do the video. Made it quick and simple. Only difference was that my bike has a Pathfinder remote fuse block velcro'd to the top of the fuel tank (under the seat). Made my wiring a snap thanks to Wago "222" connectors. No spicing or crimping for me. I did find that the second piece of 3M tape you put on was totally unnecessary as there's already a pretty good gap between the bracket and the bike in that area (on mine at least) and no possible contact = no 3M tape needed.
Installed Trunk Light & Tourblade last week. Wouldn't have done it without seeing your videos.Only problem I ran into was I have a CB and as such couldn't completely detach trunk lid from bike as I couldn't see the CB Harness Connector. I did have an experienced bike mechanic wire in a Back Off Flasher to the Tourblade. A GREAT addition..Thanks again for the videos.
TJiNY TJiNY: Thanks for the follow up comment. The instructions for the CB install would have shown you where and how the antenna wires were run. How does the back off flasher look? I’m sure it’s bright and very noticeable! How is it having a CB? I wondered if it was something I should consider
Dr. Freddy B. Wilson The Back Off Flasher is set to 5 quick/then steady flash when brakes applied. It does not interfere w turn sig/4 way on Tourblade. I had on on my 07 Wings Spoiler brake light/2 small LEDs I had mounted behind speaker. I highly recommend it as it takes the Tourblade braking to another level.
Great Video, very helpful, and instructional. I'm picking up my 2019 in a couple of days and may do trunk & Trunk strip light myself.My question where did you get that holder/bracket that is mounted in trunk for your I Pod? Thanks.
TJiNY TJiNY: Congrats you your new Goldwing! I’m sure you’ll like it. That holder in the back comes standard with the Goldwing Tour Airbag since I don’t have that storage area in the front of the bike due to placement of the airbag
Thanks for taking the time to video the install. Would suggest you try to do a better job with the lighting, audio and camera positions next time. Also I would have preferred if you had taken more time and shown more detail of the final assembly, especially the wiring.
Good job Freddy. I'm doing the same task now. The wiring may be a dilemma. I already have a pigtail connectors plugged in under the seat for a isolation fuse block that feeds all the other lights I've installed. Not sure if I can piggyback these into those and basically double up under the seat with splice connectors. Its getting crowded under there. Thanks for posting this video.
Hey John. I have an isolator fuse box as well. Were you able to figure out a fix or did you have to use the harness that is recommended for the tail light . Thanks
@@jphenderson1084 I made it all fit. I believe I doubled the connections piggy back, and pushed them under the rear part under the seat. Haven't had to take my seat off since.
@@winginitwithjohn8451 Thanks John I appreciate the quick response. So if I'm reading you correctly you have the fuse box harnesses as well as the goldstrike harness plug into one another and then they are plug into the Honda can buss harnesses correct?
Hi Dr. Freddy! I have already installed the Honda Chrome Trunk Rack with the Brake light and also the Goldstrike Led Trunk Light including the Trunk Sub-Harness. Now I wants to install the Honda Led Trunk Light for inside the trunk, do I still need additional Trunk Sub-Harness? Your reply will be greatly appreciate, Thanks!
Yes, the Goldstrike wiring harness as described near the beginning of the video. This harness will power more than one set of lights. Thanks for watching!
What's Up Doc? NIce.. 2020 or 2021? Coming My Way For A Xmas Gift To Me! Like Most Have Stated.. Get Some Help Filming For Lighting & Sound.. Good Job.. Thanx.
Just purchased this Goldstrike trunk LED light for my 2019 DCT Tour AB.
Thanks for the video, will help me through the installation process.
Looks very nice!
What a wonderful purchase! It'll light your back end up nicely! You won't regret it. Thanks for the compliment and I wish you well on the install!
Thanks for sharing. Beautiful install, great looking addition to the Wing.
Thanks and you’re welcome
I've just installed a Goldstrike trunk light but I couldn't have without your excellent tips - especially how to route the wire from the hinge area to under the seat, which is not mentioned in the instructions. Thanks for posting; you saved me hours!
You’re welcome and congrats on your install! I find this light more useful than I could have imagined! Glad to help and thanks for the nice comment!
Nice video. I just installed my Goldstrike trunk light...your video made the install easy...thanks for taking the time to help
Easy to follow video. Just received mine kit, looking at the written instructions was little confusing so i followed yours to a tee.. thanks. Nice addition to my 2020 gold-wing tour.
Great! Thanks for letting me know. Please enjoy it for I love the way it made mine look.
Freddy.... a great video...thanks so much! It was a huge help when I installed it on my 2020 Wing! Appreciate you!! Stay Safe!!
Thanks so much! Enjoy your Goldwing!
Damn clean, thorough install. Nice work!
Ryan's V-Twin Vlogs: Thanks
Dr. Freddy,
A buddy of mine just traded his beloved Harley Ultra Limited for a 2019 GoldWing DCT Tour and is ecstatic about it.
th-cam.com/users/maikeli7
Cool
Ryan's V-Twin Vlogs: Thanks
Such a fantastic video. You really made my install go smoothly. Thanks so much
Thanks! Glad you liked it and it was of some help. Love sharing with the community! Thanks for the compliment!!
I bought the same light at the last Wing Ding in Nashville. I brought it home and decided to install it myself. Googled the installation and found your video. I watched it in segments till I was finished.
Your video was quite helpful. I'd like to take the time to thank you for the good job. Your effort is appreciated.
Rod Rezvani: You’re quite welcome! I hope you enjoy yours as much as I do mine. I appreciate your kind and supportive words.
Thank you Freddy, I just brought a 2019 gold wing a just added led brake light and the led light at the top of passenger seat. Videos are awesome, keep them coming brother, took me 3 hrs,
Glad you enjoyed the videos and they were of some help to you! I hope you enjoy the. As much as I enjoy seeing mine and being seen!
I will show you a pic of mine soon, awesome
Thanks for the instructional video I will tackle that install next week I am a new subscriber as I just purchased my 2019 tour dct and have a lot of accessories to install
Terry Fernets: You have the later version of mine. Your first install will seem a little intimidating but you’ll get the hang of it. Enjoy!
Nice installation! I’ll definitely be adding one to my ‘18 Gold Wing.
dj16911: Thanks and your should.
Nice job explaining the whole process. Thanks!!!
Thank you!
Nice install,I have them also non my 2018 DCT. Lookin good! Thanks Freddy
Thanks and you’re welcome! I hope you love the way it makes your bike look as much as I do.
Great Job Freddy! I Love my Goldstrike rear taillight! I also installed the Electrical Connection running light add on for running lights. I did not install the Ciro rear strip light as my Honda Rack would block its view. Ride Safe! Just watch your lighting so you are not blocking it and the occasional sound quality. The intro was da-bomb too!
Thanks, Alex! You’re right the Tour Blade won’t fit if you have the rack. Be safe out there!
Thanks for the pointers and enjoy the Goldwing
Just finished installing my flag. Thanks for taking the time to do the video. Made it quick and simple. Only difference was that my bike has a Pathfinder remote fuse block velcro'd to the top of the fuel tank (under the seat). Made my wiring a snap thanks to Wago "222" connectors. No spicing or crimping for me. I did find that the second piece of 3M tape you put on was totally unnecessary as there's already a pretty good gap between the bracket and the bike in that area (on mine at least) and no possible contact = no 3M tape needed.
Glad my video was helpful and your pathfinder made it easier. I too now use the Wago connectors on other projects. Thanks!
OKAY Freddy just received my trunk light, going to install it this weekend.
I will follow you again !
i will keep you informed as to my progress.
Great! Let me know when you’re done and share a photo
Done !
No problems thanks for the video guidance!
How do I post a picture ?
@@ke504lo Congrats on completing your install. IDK how to post a photo.
Nice Freddy! I think I'll pick one of these up.
Ted Davis: Thanks! I think you’ll like it.
Installed Trunk Light & Tourblade last week. Wouldn't have done it without seeing your videos.Only problem I ran into was I have a CB and as such couldn't completely detach trunk lid from bike as I couldn't see the CB Harness Connector. I did have an experienced bike mechanic wire in a Back Off Flasher to the Tourblade. A GREAT addition..Thanks again for the videos.
TJiNY TJiNY: Thanks for the follow up comment. The instructions for the CB install would have shown you where and how the antenna wires were run. How does the back off flasher look? I’m sure it’s bright and very noticeable! How is it having a CB? I wondered if it was something I should consider
Dr. Freddy B. Wilson The Back Off Flasher is set to 5 quick/then steady flash when brakes applied. It does not interfere w turn sig/4 way on Tourblade. I had on on my 07 Wings Spoiler brake light/2 small LEDs I had mounted behind speaker. I highly recommend it as it takes the Tourblade braking to another level.
Are you on Twitter?
I used the CB on guided rides I did.
TJiNY TJiNY: I am bit haven’t used it in forever
Thanks so much very clean job.
Thanks
Great Video, very helpful, and instructional. I'm picking up my 2019 in a couple of days and may do trunk & Trunk strip light myself.My question where did you get that holder/bracket that is mounted in trunk for your I Pod? Thanks.
TJiNY TJiNY: Congrats you your new Goldwing! I’m sure you’ll like it. That holder in the back comes standard with the Goldwing Tour Airbag since I don’t have that storage area in the front of the bike due to placement of the airbag
Great video, thanks for sharing! What's next?
WAYNE PAGE: Thanks for the compliment! I only have one more small project in mind but will have to wait for the next big one
Nice job
Chopper G: Thanks
Freddy. Nice job. Total time estimate?
Thanks for taking the time to video the install. Would suggest you try to do a better job with the lighting, audio and camera positions next time. Also I would have preferred if you had taken more time and shown more detail of the final assembly, especially the wiring.
Doug Bohman: thanks for the input!
NICE!!!
starastronomer: Thanks
Sooooooooooooo, are you going to start posting more awesome videos like this one?
Mike malinconico: Hopefully soon. Unlike some others, I have a budget to stick to.
Good job Freddy. I'm doing the same task now. The wiring may be a dilemma. I already have a pigtail connectors plugged in under the seat for a isolation fuse block that feeds all the other lights I've installed. Not sure if I can piggyback these into those and basically double up under the seat with splice connectors. Its getting crowded under there. Thanks for posting this video.
Hey John. I have an isolator fuse box as well. Were you able to figure out a fix or did you have to use the harness that is recommended for the tail light . Thanks
@@jphenderson1084 I made it all fit. I believe I doubled the connections piggy back, and pushed them under the rear part under the seat. Haven't had to take my seat off since.
@@winginitwithjohn8451 Thanks John I appreciate the quick response. So if I'm reading you correctly you have the fuse box harnesses as well as the goldstrike harness plug into one another and then they are plug into the Honda can buss harnesses correct?
@@jphenderson1084 that is correct.
@@winginitwithjohn8451 Thanks Sir. I appreciate your help. Be well ride safe and stay healthy... 👍🏻
Hi Dr. Freddy! I have already installed the Honda Chrome Trunk Rack with the Brake light and also the Goldstrike Led Trunk Light including the Trunk Sub-Harness. Now I wants to install the Honda Led Trunk Light for inside the trunk, do I still need additional Trunk Sub-Harness? Your reply will be greatly appreciate, Thanks!
Sorry, I'm just now seeing this. I hope you figured out that yes, you need Honda's sub harness for the interior light. I hope it all worked out.
Have you found a brake modulator that will modulate both the OEM and the goldstrike lights?????
ostbob: No, I haven’t looked for one. I’m personally don’t use modulators. Good luck finding one.
Did you need any additional harness for this installation?
Yes, the Goldstrike wiring harness as described near the beginning of the video. This harness will power more than one set of lights. Thanks for watching!
Whats the estimated time for the installation. Assuming the owner is some what mechanical.
ostbob: If you already have a wiring harness installed, about 2.5 hours
About an hour. if ya don't have to splice any wires like Freddy did. I have a remote fuse block and used Wago connectors: simple.
What's Up Doc? NIce.. 2020 or 2021? Coming My Way For A Xmas Gift To Me! Like Most Have Stated.. Get Some Help Filming For Lighting & Sound.. Good Job.. Thanx.
Thanks! I look forward to when you get your new one! Please share when you do.