You are correct Mike, the plug & play harness only works for Goldwing year models 2018-2020, on my 2021 model the running lights only came on not the turn signals so I straight wired it. I was hoping for a quick plug and play but a good installer must always be prepared to improvise!
I have these in chrome. Rick and Team at Wing Stuff are pretty passionate about all things Gold Wing. They are the go to for Wing accessories. Now to these Pathfinder LED Cowl Lights. They are amazing. Super bright is an understatement. Very high lumen LED’s and perusal Pathfinder quality. I also used the 11 port Pathfinder Isolation Fuse Block. Since you have created the Caliente Signature Series Fuse Block you’re GTG. Nice work once again Chris. Good stuff. Ride safe and often. Peace
Why didn't u tap into the showchrome and for the naked flame use a heat gun less chance of blowing yourself up with the petrol tank near by . The wiring is like spaghetti junction if you ever get a fault with the wiring it would take u a month of Sundays to trace .
My Pathfinder Cowl light kit G18CWL did not come with the sub-harness for my 2022 GL which connects into both sides of the bike, BUT the Show Chrome fuse block 52-942 DID include it, so I will cut off the flat white connector end of the Pathfinder lighting wires and tap into the fuse block output with those wires. Seems an easier solution to me. Thanks for the video regardless!
These were PATHFINDER BRAND LIGHTS that I installed In this video but GOLDSTIKE Brand Lights gives you a limited lifetime warranty when you buy Goldstrike lights products. My suggestion is that you reach out to Pathfinder to see if you are covered under some kind of warranty!
Hey Chris, how long is the warranty for the turn signal/running lights? I have installed literally dozens of after market LED lights of all kinds for my bikes and they never last more than a year or two before malfuntioning.
Chris I just purchased a 2023 black Goldwing is there a way to leak your phone to the Goldwing hardwiring in the in the glove box I have tried the ma-1 Motorola I can't seem to get it to work
Hello Chris, Man, I just finished watching your video on your installation of the Pathfinder LED COWL lights, great job! Unfortunately the harness didn’t work, but you had the solution with the harness you had already installed, that you tapped into. I guess in my case, I would need the Goldstrike distribution block to accomplish that hook up! I enjoyed your video!!! Loyal.
Hi Chris . I’ve just bought a new 2022 bike here in the U.K. . I’ll have to get some of these imported BM but same question about the Harness? How come it doesn’t work? Did the harness come with the lights or a separate?
Hey Chris I wanted to let you know that I enjoyed your videos . A friend of yours that rise with you in Mississippi his name is Dave road name catch my name is AJ Moody and I also ride a Gold Wing and I would like to hear from you sometime when you get a chance thank you sir you have a good day and ride safe.
Khalid, thanks for watching my videos in your country, but unfortunately motorcycle are very small and it’s impossible to completely hide all the wiring for lights unless the manufacturer completely wired the bike for accessories during production before assembly and that’s not realistic.
Chris, I would like ask, why do you have on a Honda shirt. A lot of you guys need to be careful and not let these companies use you through TH-cam. Have fun, but don’t be working for free. Peace
What’s the difference between Caliente wearing a Honda shirt and a Harley rider wearing a Harley Davidson shirt displaying his Tattoos and Handlebar Mustache?
Hey Chris. I have the same lights. The harness won't work on the 21+ models due to the can bus system.
You are correct Mike, the plug & play harness only works for Goldwing year models 2018-2020, on my 2021 model the running lights only came on not the turn signals so I straight wired it. I was hoping for a quick plug and play but a good installer must always be prepared to improvise!
Plus it looks awesome!
I have these in chrome. Rick and Team at Wing Stuff are pretty passionate about all things Gold Wing. They are the go to for Wing accessories. Now to these Pathfinder LED Cowl Lights. They are amazing. Super bright is an understatement. Very high lumen LED’s and perusal Pathfinder quality. I also used the 11 port Pathfinder Isolation Fuse Block. Since you have created the Caliente Signature Series Fuse Block you’re GTG. Nice work once again Chris. Good stuff. Ride safe and often. Peace
Like the way you show what you're doing and the how too wiring tutorial.
Wow, actually, half of the weight of the bike consists of cables and wires lol
Man that is awesome.
I'm jealous!!
Lol
Lights equals visibility which falls under safety for the rider. Stay tuned to the channel, more to come!
Why didn't u tap into the showchrome and for the naked flame use a heat gun less chance of blowing yourself up with the petrol tank near by . The wiring is like spaghetti junction if you ever get a fault with the wiring it would take u a month of Sundays to trace .
My Pathfinder Cowl light kit G18CWL did not come with the sub-harness for my 2022 GL which connects into both sides of the bike, BUT the Show Chrome fuse block 52-942 DID include it, so I will cut off the flat white connector end of the Pathfinder lighting wires and tap into the fuse block output with those wires. Seems an easier solution to me. Thanks for the video regardless!
Hey Chris do u know if a plug and play harness is available now for the 2024 models I am picking up my goldwing as I write this … you did a g8 job
Those are in fire!!
Now It’s time to go supernova with some GOLDSTIKE.
I bought these lights. it did not even last 3 months the water infiltrated and no longer functioned.
These were PATHFINDER BRAND LIGHTS that I installed In this video but GOLDSTIKE Brand Lights gives you a limited lifetime warranty when you buy Goldstrike lights products. My suggestion is that you reach out to Pathfinder to see if you are covered under some kind of warranty!
Hey Chris, how long is the warranty for the turn signal/running lights? I have installed literally dozens of after market LED lights of all kinds for my bikes and they never last more than a year or two before malfuntioning.
The wiring on that motorcycle is a mess, did it come that way or have you added a lot of accessories?
Chris I just purchased a 2023 black Goldwing is there a way to leak your phone to the Goldwing hardwiring in the in the glove box I have tried the ma-1 Motorola I can't seem to get it to work
I have that same Motorola adapter on my 21. You do need a Bluetooth headset connected to the bike for that to work.
Hello Chris,
Man, I just finished watching your video on your installation of the Pathfinder LED COWL lights, great job! Unfortunately the harness didn’t work, but you had the solution with the harness you had already installed, that you tapped into. I guess in my case, I would need the Goldstrike distribution block to accomplish that hook up! I enjoyed your video!!!
Loyal.
Hi Chris . I’ve just bought a new 2022 bike here in the U.K. . I’ll have to get some of these imported BM but same question about the Harness? How come it doesn’t work? Did the harness come with the lights or a separate?
I Finally got these installed. Fairly Simple install and yes they are BRITE!!!!
Thank you! Chris and as always a great video.
Your welcome, thanks for watching.
Great job
Can you tell me how is the wiring of the 2021 Wing different than in the 2018+ bikes? Thanks
Awesome job! Looks great!
Thanks for sharing.
Ride Safely!
You need a CAN bus controller for your year and model bike to make those lights work as advertised then it’s plug and play
Do you have any links for that?
Hey Chris I wanted to let you know that I enjoyed your videos . A friend of yours that rise with you in Mississippi his name is Dave road name catch my name is AJ Moody and I also ride a Gold Wing and I would like to hear from you sometime when you get a chance thank you sir you have a good day and ride safe.
You can text or call the Caliente Line (901)468-9032 it’s public.
Looks great C!
Kick them homie I see u looking good this big bo from LA
Thanks Bo, go Wingstuff!
Looks awesome Chris 👌. ARKANSAS Badlands
دراجتك صايره محول كهرباء من كثر الاسلاك
Here in the States we like lights. Many lights. To be seen. Better visibility from road traffic. When done “correctly” this is never a problem.
Khalid, thanks for watching my videos in your country, but unfortunately motorcycle are very small and it’s impossible to completely hide all the wiring for lights unless the manufacturer completely wired the bike for accessories during production before assembly and that’s not realistic.
I can see a cop giving a person a ticket for having white lights on the sides of the motorcycle.
Chris, I would like ask, why do you have on a Honda shirt. A lot of you guys need to be careful and not let these companies use you through TH-cam.
Have fun, but don’t be working for free. Peace
What’s the difference between Caliente wearing a Honda shirt and a Harley rider wearing a Harley Davidson shirt displaying his Tattoos and Handlebar Mustache?
@@chriscaliente5033 Chris, whats the answer to the question ? i want a Honda shirt!!