ฝัง
- เผยแพร่เมื่อ 1 มิ.ย. 2024
- Full PLaylist: • How to Use a Sewing Ma...
-
-
Top Rated Products for Every Sewing Project:
Singer Beginners Sewing Kit: amzn.to/1VwUwIN
Gingher Dressmaker's Shears: amzn.to/1VwW2L3
One-Yard Wonders: 101 Sewing Projects: amzn.to/1Q98Dkz
Dritz Deluxe Seam Ripper: amzn.to/1N3d2Wd
Clover Leather Coin Thimble: amzn.to/1Ks5IEV
Watch more How to Use a Sewing Machine videos: www.howcast.com/videos/512565-...
Hi. I'm Jennifer from Workroom Social, and I'm going to show you how to load a bobbin into your sewing machine. So, the first thing you want to do is thread your sewing machine. After your sewing machine is threaded, you want to take your wound bobbin and you kind of want to just extend a little thread to have as a small tail.
Now, my machine has an arm here that comes off, so I'm going to take that off and move it aside. My sewing machine is a vertical bobbin. There are also some machines that are horizontal bobbins. So, you should just go back to your user's manual to see instructions for loading your bobbin.
On my machine, I have a casing here. This is a bobbin casing, and I'm going to take my bobbin and I want to place it inside my casing with the thread going counter clockwise. And I'm just going to look and see that this notch, which is where the thread is going to go through, is going sort of to the left.
So, I want my thread to go in the same direction as the bobbin casing, and then I'm going to take the thread and kind of pull it under there. And now you can see when I pull the thread, the bobbin turns.
So, now with the bobbin in the casing, you're going to go ahead and load it into your machine. You'll take this little lever and hold it out. That will keep your bobbin from falling out of the casing, because that is kind of annoying when it's rolling all around on your floor. And then you are just going to place it into your machine. There is this little notch up at the top, that there is a corresponding notch in the machine, so you can't really mess it up.
Just put it in until it gets into place and it doesn't turn, and then you can let go of that lever. Now, that's in and that's steady. The last thing you want to do is you want to pull this thread up though your throat plate, so that both threads are underneath your presser foot.
So, to do that, you'll just hold your needle thread. And using the hand wheel on the right, you're going to twist it towards you to send the needle down, and back up, and then you'll kind of tug on this thread, and there is a bobbin thread. They're two different colors, so you can see this one is the bobbin thread and the purple is the needle thread. You'll just put those towards the back of your machine, and now you're ready to sew. - แนวปฏิบัติและการใช้ชีวิต
![[TH] VCT Masters Shanghai Playoffs DAY 3 // FNC vs FUT | EDG vs PRX](http://i.ytimg.com/vi/pw2T5v0ogDI/mqdefault.jpg)
Sewing Playlist: th-cam.com/play/PLLALQuK1NDriabACbDfMMfR6KucpOUFC6.html
@Jack Armani a@. Yes bbYes bYes
@Jamie Solomon bb but
Love it, i would like to have it in a video if possible please. Thank you
i've been trying this for over an hour and it's not working i'm literally about to cry of frustration
Honestly same nothings coming through 😭
@@taviebp128 at least for mine the upper thread has to be completely threaded first to pull up the lower thread they kind of cross over and it brings up the other of that makes sense
@@pandabunny3767 thanks Mine is idk why it’s not working 😭thank u sm tho
Same! I had to put a blanket over it so I didn't take a sledgehammer to it out of frustration
My Toyota machine you have the bobbin thread leading off clockwise. Maybe that’s your issue?
i'm making a squid pillow with my husband and you saved my marriage
Vanessa Christine LMAO
My wife gave up because it was frustrating her so bad, after about 5 TH-cam videos I winded the bobbin, and threaded everything so we're good to go. Very frustrating! 🤣
hahaha
Lmao 😂
How did the pillow come out?
I have never in my life used a sewing machine ever. And I bought one to sew masks for our medical professionals and this was so easy to do because I had no idea what to do. I am using a vintage Sears Commander model and we will see how it goes. Thanks again your a great teacher. I gave you a thumbs up and I subscribed to your channel. Thanks again.
Thank you, thank you, THANK YOU!!!
After 2 weeks of fighting with my new sewing machine, I watch this video and others from "Howcast" and now I can finally start sewing! :)
I am one happy camper.
Did I mention THANK YOU :)
Same here
THIS WAS THE ONLY VIDEO THAT HELPED. praise💟💟💟😭
Same and I have the same machine!
seriously I remember so much from my gramma, I think she held the bobbin as I wasn't ready. Thank you !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@@katespringworth9823: Me, too, but mine says Simplicity Celebrity instead of Kenmore.
KutWrite mines the same brand I just found its a older model on the side it has wheels to turn for settings instead of buttons
@@katespringworth9823: Mine has wheels too. It also seems to have two tension wheels, one on top like this and one facing the operator.
Haven't used machine for 30 years, needed a 'refresher' thanks. 👍
This didn’t really help me but I see that it helped others
facts it didnt
It didn't help me either
Same. I borrowed a friend’s machine who has literally the exact same one. I can’t get the bottom thread to load to save my life. Amazing, I leaned to knit on TH-cam but this
I must’ve watched 10 “needle not catching bobbing thread” videos before this one. LIFE SAVER!!
You have no idea the headache you’ve saved my mother from. Thank you so much again!
Oh my GOD ive been trying to load the bottom bobbin for like 30 minutes before i had the bright idea to look up a tutorial!! I had no idea you had to string the top one first!!!
I'm an insulator and you just helped me start my day at work.
God bless her young heart. I never got the hang of this 😭
Thank you so much for this! I’ve struggled no end and been using my mum’s old machine from the 60’s. There was one step I didn’t realise which is why it wasn’t coming up. Thank you for clear visual and verbal instructions :)
Mamm you do not understand, after like 10 years of nobody in my family knowing how to use this machine, u pulled through with the only understandable tutorial I’ve ever seen. I am in love with u.
This video give clear and exact instructions on how to load a bobbin! Thank you.
Omg thank you so much!!!!
My sister went to bed and I forgot everything she told me lol. Life saver. Thank you!
This sewing lady is the only thing keeping me sane
Hello Jennifer, you are brilliant my wife has been tearing her hair out with her sewing machine. You put everything right for her, so brilliant instructions, thank you so much. Mark.
1st time on the sewing machine.....oh my lord thank u so much for the video....I had been trying for more than 2 hours just to patch a jean🤣🤣🤣🤣 Thank u so much💜✌
You are my saviour!!!!!! You have cured my machine and never ending loops! X))))) I AM SO HAPPI SENIDNG LOVE AND JOY !
I had never used a sewing machine before, I watched seven videos before getting to this one, I couldn't get the loop for the threads, I was crying out of frustration. Thank you so much
Thank you for making it so easy to do! I didn't have the directions and you made it so easy!
This video was a super help and a life saver. Great content throughout and a thorough explanation. Good job guys!
Your a life saver . I was struggling , just got a sewing machine that was given to me
This just saved me so much bother!! My machine's instructions said nothing about how to pull it up through the machine at the end - thank you so much!!
Your a Blessing..... my Singer Heavy Duty Broke .... now had to Learn about a Vertical Bobbin... Your a Blessing 😇🥰
This is literally a perfect video. Short, your talking, informative to the T, and pretty much error proof.
Thank you so much for this! I had been trying for half an hour before deciding to look on TH-cam. Turns out I wasn’t putting the bobbin holder in the machine properly. I followed your instructions and it worked first time! Phew!
omg thank you! like previous post said this is the only video I've found that helped! thank you for showing and explaining so clearly!
You are the love of my life, I have been trying at this for over an hour and sobbing and you just fixed it
this was so helpful because my cousin gave me her sewing machine and i couldnt figure out how to use it but thanks to this video im now sewing dresses for my family and lots of other clothes
I'm so glad I came across this video. You make this look so easy. I was just given a similar machine and this was very informative. Thank you so much!
You were so helpful! My five year old found my sewing machine and wanted to sew. Our bobbin got messed up and I was struggling! You were a lifesaver! Thank you!
Thankyou Sewing Sensei this saved my life
I’m trying to make a fursuit tail for a friends birthday with my moms old sewing machine since hand sewing has taken too long in the past I haven’t touched a sewing machine since 8th grade omg thank you so much
Thank you for this! I haven't loaded a bobbin since home ec/middle school 1997-1999 and I couldn't remember how. I have acquired my grandmother's sewing machine in the time since her death in 2013 and want to start making my own formal dresses and re-tailoring some of my old clothes into something new. I so needed this refresher! Thanks so much!
After many years of not sewing I found myself needing to make home made masks. I forgot how to change the bobbin & your video saved the day. Thank you!
I am a cosplayer and I didn’t know how to do that under thread thing but I actually got this right on the first try thank you so much ☺️ now I can my my costumes!
I’ve been sewing since I was 8 and I still have to come back to this video when my bobbin is causing me trouble.
So happy I found this...... Bless your cotton socks for demonstrating this. xx
Thank you so much I was looking for ages to find a video to help me with this xxxx
Thank you so much. I got this machine but the owner's manual doesn't explain how to thread the 2110. I appreciate it!
I'm so grateful for this video. Second time I've used it and I'm on my way to memorizing how to load my bobbin! 😊
Decided to take on sewing...I'm almost 40 and have no clue what I'm doing. So thank you!
I was ready to throw the sewing machine out. Thank you so very much. Your video was very well done. Thank you.
Michael A. Coates me too was about to throw it at a wall.
Borrowed an older sewing machine from my grandmother and the user manual wasn’t helping - but this video did. Thanks so much!!
Omggg thank you sooo much!!!! I have been struggling with this for the past hour and can literally cry happy tears cuz I’ve finally managed to get started on my sewing machine!!
Thanks so much! My mum was out so I didn’t know what to do, but this really helped!
i am a builder so a sewing machine is not a thing i use to often! other videos i have always given u but ths one worked for me
1:54 you haven’t met my grandma. She messed it up. Love her to bits
2:17 thats so cool!! exactly what i was missing, thank you!
Thank you so much! Now i can make my bucket hat! 🥺😊
thank you!!! :) I bought a machine a few months ago, but have yet to use it. I viewed many vids, SO I CAN use my machine, ... but ya, I am lazy? A procrastinator? Loser? "NO." I am busy & overwhelmed :( Again, THANK YOU ;) Makes my day!!!
After an hour and very determined I finally did it!!
this video gave me all the confidence i have been looking for, thank you so much
I’ve never been able to thread a bobbin so effortlessly. Thank you!!!!!!
Been trying to push the bobbin thread through that hole using my big fingers for hours before I saw this video😂
Crystal clear explanation! Saved us !!! ❤️❤️❤️
I watched 3 different videos before this one and this is the one that worked. THANK YOU!
was literally about to cry until i saw this, thank you.
You were more help than my instructions! Thanks 😊
I have struggled forever because I have no training (self taught in the little I can do) and I inherited my machine from my Gram with no owners manual. This was the first time I threaded a bobbin and it worked on the first try
This took me so long until I saw the video thank you so much ♥️♥️♥️♥️♥️♥️
Thank you for the clear instructions. I was having a tough time replacing mine. :)
Thank you! I was struggling to get my bobbin back in and this really helped!
Thank you so much. I found my late mum's sewing machine but it had no instruction manual so your videos helped so much and so glad I can now use my mum's machine. Thank you
You. Are. A. Saint! I've been hand sewing because I've had no idea how to load or thread a bobbin! Thank you so much
Though bobbin direction does not always affect sewing on vertical mounted bobbins, this type bobbin orientation should always have the bobbin turning clockwise when the bobbin faces you and you pull the thread. You have installed the bobbin counterclockwise in this video.
This will affect lower bobbin tension and on some machines will not sew correctly. Top loading bobbins(bobbins that lay horizontal) do care and will not sew properly if not oriented correctly and normally turn counter clockwise but you need to verify with your machines manual.
Thanks, I was wondering about this. I'm having problems with a machine that looks similar to this one. The manual says CW, and she does CCW.
i havent sewn in 3 years and i forgot how to do this, and after 20 minutes of frustration, I looked it up and yours was the best one to help me!
Thank you so much! I had forgotten that the thread needed to be counterclockwise in the bobbin!
Thank you thank you thank you I got a singer machine for my birthday and it jammed and I had no clue how to fix it and you guys helped me reload it and fix it thank you
Thank you soooooo much. You saved my day after an hour of trying to load it. I did it at school and couldn’t quite remember how. This is a life saver. Thank you 🙏
Thank you!
We got gifted with a sewing machine and my 12 yrs old daughter could do it
SAVED Christmas. Thank you so so much, huge help!
thank u so much...its been a minute! short and to the point!!!
This was incredibly useful. I have watched many of these in the past when I forgot how to do this and none were so straightforward !
Wowwww I was struggling to do this trying to put the thread manually though the hole !!! This was so helpful !!!
You wouldn't believe how long I've been trying to find a helpful video on how to do this. It's been driving me nuts for hours! This was so helpful! Thank you!
Thank you! I’m trying to figure this out to show my daughter and these videos have been really helpful so far.
I could never remember if when I thread my machine if the foot should be up or down, and which way to turn the hand wheel. You just solved that for me, so thanks.... I sew so little I forget how, sometimes, LoL.... I also watched a video on how to tighten my bobbin holder as its always getting tangled up in there. I have brother's low grade machine, has about 5 built in stitches and that is probably 3 more than I've ever used LOL... I'm a guy, live alone after 2 divorces since 2001, so I taught myself to sew based on watching my mom sew (she was good at it making dresses etc.) just so I could fix clothes I ripped or patch holes to get a bit more life from my work shirts, and soon I hope to hem my own jeans, unless the store will do it for $10 or $15 bucks, then they measure and get things even etc. I have already had success hemming my work pants. However, thanks for this video, I gave you a thumbs up and appreciate your time in producing this. FYI, I didn't actually sit with my mom and get lessons, I just watched her cut patterns out and I saw her sewing. I was too busy building race cars or being out in the garage. But now I find fixing my own stuff where applicable a money & time saver + my machine is portable so I can sew in front of the TV, best of both worlds huh? I had to brush up again, I have not had my machine out in two years, and I have some clothes that need simple repairs...... Your video helped me save probably a lot of time, so thanks again.
Thank you, I’m making my first skirt so I can finally have one that I’m comfortable in and this is great. I couldn’t figure out the bobin and my grandparents are letting me borrow their machine right now
Very helpful. I won't have trouble with this task now!
THANK YOU!! this was the only video i could find that helped!
Thank you so much for this video! You did it in a way that made the whole process look very easy!
Thanks Jennifer, your videos helped me get up and running with my sewing machine!
Thank you so much! Did a last minute sewing project and however you taught it worked for my sister!!
Thanks for showing this. I just bought the Stirling sewing machine . It’s helpful.
Thanks for this video. I just got an industrial style machine with this vertical style bobbin and the worst 'how to' instruction book ever. I have only owned top bobbins before this machine. Thanks, you saved me a ton of "What the heck?!" with this machine. =)
Thanks it worked. It's easy after watching you
Our new sewing machine doesn’t explain the bobbin thread technique - using the hand wheel and needle to ‘catch’ the bottom thread.
Thanks for clearly showing that in this video😅
Currently sewing a cosplay at 1am and this was the only vid that helped!! Thank you so much!!
This video helped me and I can tell you that even my stitching is straight and does not get stuck anymore, yeah. I subscribed to your channel.
You're a great teacher, thank you!
Thank you me and my mom had to quit last night so I searched a video and if worked perfectly we have almost the same machine
GREAT video. Clear instructions and good shooting. I really needed this, thank you!
Perfect video thank you! I know how to pull up the bobbin thread but it was being stubborn and this video helped me!!
Got a book but was as clear as mud, Thanks for the video this helped loads (i`m a sowing newbie havent used one since school 27 years ago)
Jennifer’s a good teacher
Thank You very much !!! Your info was worth millions!!! I am a beginner and this is a 70's machine!! :)
Thank you for this. I decided to learn how to sew about 20 min ago and this was the first question that came up.