Knock-offs & Wheel chips
ฝัง
- เผยแพร่เมื่อ 16 มิ.ย. 2018
- I'm not 100% sure why the back wheel was loose. The knock-off was tight and I couldn't get it any tighter. Swap it front to back and everything is cool I have no explanation for why it did that. I only shortened up the studs because of the wheel marks on the back of the wheel I don't think that had anything to do with what they're doing. I don't know but I'm fucking rolling it.
Previous video about the rear arms
• I blew a hose again! L...
Fuzzy's mystery link
• hopping shopping cart ...
I live close to what was zenith wire wheels...it called wire wheel king...in campbell California
Informative video Brutha 👍
Is the 3M adhesive you recommend what was on the spinner face you had to boil and pry to separate?
“a little persuasion on the backside” says it all
Thanks for that tip about knockin em off
make longer vids...i cried when this was over 😥
Can you use a dead blow hammer if you don't have a lead hammer?
Very good vid
Great video thanks brother. I do believe you proved in this video your not going to forget about them. I am glad you got it fixed. Keep up the great work see you in the next video thanks again brother
what kind of wires you got and a certain way you protect the wires from getting rusty?
Spray wd40 on em when you store you're ride also make sure you grease up the threads on the knock off a little goes a long way wd40 will make it easier to clean brake dust off also
Thank you
Bar Keepers Friend powder. Scrub with a nail brush n rinse...that worked wonders on my player wires
Thanks I was just about to ask whAt type of glue and them bam you said it
Washer time or mm spacer
meguiars wheel brightener
Are these knockoffs locking to the adapter with bolts?
They can yes. Way back when I first got these wheels I put a couple of bolts in them because that's all I had. And I know with two it just shears them right off from moving around. I've never tried again
where do you get the zenith wheels from? is there a web site? people like me on the east coast need this info lol
I wish i could tell you i dont remember. It was a zenith dealer in California. I picked them out on there website. It was about 10 years ago when i bought them. Where u at on the east? Im in ohio
@@rustybrowneye I'm in nyc and also new jersey
China, but alot of people in America will charge you double
Grey Classic chinas they don’t make em stainless still no here’s a big difference!! There’s good quality an poor quality that’s what you end up paying for !!!
Are these 13's? did they clear the brake? looking to get some wires for my 98 towncar.
Those are 14s but I can clear 13s. I used the spindle in brake components from a 91 Town Car. They clear without any spacers
Thanks for the reply dude. Do you think 15”s would clear without swapping spindles and brakes?
@@Dollywood22 I'm not sure. The 98 spindles I took off of my car I put on that 91 and then I sold the car. When I sold the car I had 15-inch aluminum wheels on it and the calipers did not clear. I ground a lot of metal off those calipers before the wheels fit. However a knockoff has quite a bit different offset then a regular wheel. But since they weren't even close to fitting the aluminum wheels I would have to lean towards no, but I'm not sure
Ok. Thanks for the help
Coo vid
Auto zone sells a tool to clean you're inbetween you're spokes its like a power ball the (chip foose drill) It has a much thinner tip on it.
I rewinded on the " Ow fuck " like 10 times bro
Now where to get Zenith wire wheels new lol
The black chips look too plain.
Maybe use a long soft bristle paint brush to get inside those spokes. Tooth brush just not long enough. Got a 3 pack at Wal-Mart that the bristles were extremely soft and gentle enough for the chrome.
U need to get some street juice safe on all gold and chrome wire wheels
Zenith look way more sexier then Daytons, Truspokers are God rims
🧤
TIGHT video
use a shoestring to clean between them spokes if you can find some fat laces them even better
That is a excellent idea
Use Q tips ...lots and lots of M.F'n Q-tips...and never hurts to get your kids..step kids nephews...cuzzo's brothers or any other positive member of the family to help
Them thangz wire wheel cleaner
Cooking with fuzzy
mr somthinbasic215 i cook all the time, thats my meth pot
fuzzy wuzzy Sounds delicious🍳
You get what you pay for with Chinas ... they still look good though ;-)
Iwant2winfreestuff
Q tips
Btw great FUCKEN video...
Some sugar and raw honey and a shot of ot milk. Q vo. Rinse whit a bit of palmolive in a blast of rinse done
not cool
bro why do people even use those stupid hammers? if you got the money for some nice wheels why not invest in the knockoff or" dayton tool" saves you in long run cause you bend your knockoffs and dent em then the lead hammer eventually also needs replacing! the only thing you need to worry about the tool is having the rubber tubing on the parts that touch your knockoffs! get a tool do yourself a favor! real talk