I got some of those. I have been using them and they seem to work well. I like the dimple in the feeder for the hook bait to sit on. Amazon do a 4 pack 20 to 60g I think.
The Hirisi Hybrid Method.......... feeders from Aliexpress come in various weights and are similar to the very good ( and much more expensive ) Guru feeders. I was paying around £13 for 10 plus P&P and VAT.. Fantastic feeders .
When it comes to feeders i tell everyone just start off with the cheapest. They all do the same job at the end of the day, i prefer to use the preston ics ones purely due to personal preference 🙂
I've made some of my own Method Feeders out of Oval, shower gel caps, drill both ends & thread a piece of detergent spray tube through for the quick change bead - a cut down spanner from an MFI flatpack kit makes the weight. Trim the cap down a bit shallower. The only Limits, are your own Imagination!!
@felgate11 I watched a video of Andy Findlay talking about inventing the method feeder, he was showing a load of home made feeders from before the method was made and honestly you'd think a 5 year old made most of them! But they did the job! If it works it's worth using
Hi Carl, they look very good, you usually have to spend £10 and sometimes £20 to get the Free Postage, depending on what day it is.? I've also bought some, Combined, Drill & Tap sets M3 to M10 they drill the hole and cut and Thread at the same time (buy 2 sets as the M3's break easily with power tools) Also there's a "Split Shot" opening,, combined Scissor/Plier tool. The Scissors bit has fine serrations (for Braid ?) and they cut Mono' nicely as well. with a neat closing clip.
@@shaunhutley6098 I will make another video next week mate on other attachments fitting it also if different feeders fit the mould so stay tuned pal 👍🏻
Nice,,, its worth the money just for the mold, have u tried other feeders in the mold see if any fit? Just curious,nice vid mate thankyou for your time and effort even in the bad weather, 👍👍
@@thebobsta4658 definitely and I haven’t mate I will try some others at some point and make a video on it, also no problem at all I still enjoy making content even when the weather is bad tight lines pal 👍🏻
Hay up Carl another good vid mate will have to buy some and give them a go fair play to u filming in the rain mate look forward to the next vid
@@kevcree5659 thank you pal and for the price mate it’s a win win 👍🏻
I got some of those. I have been using them and they seem to work well.
I like the dimple in the feeder for the hook bait to sit on.
Amazon do a 4 pack 20 to 60g I think.
Good video and content again pal 👍
@@StephenPickering-b5u thanks mate 👍🏻
The Hirisi Hybrid Method.......... feeders from Aliexpress come in various weights and are similar to the very good ( and much more expensive ) Guru feeders. I was paying around £13 for 10 plus P&P and VAT.. Fantastic feeders .
@@beachcaster56 will check them out mate and that is a cracking deal too
Just received some FTK sinking feeder line ...0.14 mm .....17 LB well impressed £3.40 for 300 m.
@@johncaven8170 I’ve used that line before and I do think it’s good and like you have said great price for 300m
When it comes to feeders i tell everyone just start off with the cheapest.
They all do the same job at the end of the day, i prefer to use the preston ics ones purely due to personal preference 🙂
I've made some of my own Method Feeders out of Oval, shower gel caps, drill both ends & thread a piece of detergent spray tube through for the quick change bead - a cut down spanner from an MFI flatpack kit makes the weight. Trim the cap down a bit shallower. The only Limits, are your own Imagination!!
@felgate11 I watched a video of Andy Findlay talking about inventing the method feeder, he was showing a load of home made feeders from before the method was made and honestly you'd think a 5 year old made most of them!
But they did the job! If it works it's worth using
Blooks good enough Carmel. Will have to give em a try mate,like you can't be beat on the price eh mate
@@pauledwards6470 definitely not pal for that price it’s a steal 👍🏻
Hi Carl, they look very good, you usually have to spend £10 and sometimes £20 to get the Free Postage, depending on what day it is.? I've also bought some, Combined, Drill & Tap sets M3 to M10 they drill the hole and cut and Thread at the same time (buy 2 sets as the M3's break easily with power tools) Also there's a "Split Shot" opening,, combined Scissor/Plier tool. The Scissors bit has fine serrations (for Braid ?) and they cut Mono' nicely as well. with a neat closing clip.
such a good price as well can you find out if you can fit any elasticated stems inside them methods from any other companies plz ?🎣
@@shaunhutley6098 I will make another video next week mate on other attachments fitting it also if different feeders fit the mould so stay tuned pal 👍🏻
Nice,,, its worth the money just for the mold, have u tried other feeders in the mold see if any fit? Just curious,nice vid mate thankyou for your time and effort even in the bad weather, 👍👍
@@thebobsta4658 definitely and I haven’t mate I will try some others at some point and make a video on it, also no problem at all I still enjoy making content even when the weather is bad tight lines pal 👍🏻
UK weather at its best 🤣
@@fishandchill. I know right 😂😂and it’s literally white over now
The feeders from temu look OK bit everything else is absolutely crap Chinese rubbish 😮